Heidolph ME1 Diaphragm Vacuum Pump

Double-headed, chemically resistant, dry-running diaphragm pumps for a wide range of laboratory appl (more)ications. For conveying and evacuating, without affecting the media. • 100% oil-free transfer, so that the media cannot be contaminated during pumping, evacuating or compressing • Very suitable for vapours and condensates • Suitable for slightly aggressive and corrosive gases and vapours • Maintenance-free, environmentally friendly • Flow rate: 34 L/min (at atmospheric pressure) • Working pressure: 1.0 bar • Final pressure (abs): 8 mbar Dimensions (DxHxW): 341 x 226 x 166 mm Weight: 12 kg

This Edwards Model E2M2 Rotary Vane High Vacuum Pump 2 Two stage was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and has been tested with a gauge (not included). It seems to be drawing suction but will need to be serviced by an engineer. It is in good cosmetic condition with some marks from use. it is missing a foot.

Heidolph ME1 Diaphragm Vacuum PumpThese pumps guarantee minimum noise and vibrations during operatio (more)n. Rpm-regulated pumps achieve the most precise vacuum. Minimized runtime saves energy and significantly increases the lifespan of the diaphragm. Once the required vacuum is reached, the pump automatically stops and reliably keeps the vacuum at the desired level. Highest distillation rates possible and reducing process time by 30%. Solvent recovery of up to 99%. Condenser is not in scope of delivery.

Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump (more), 120V, 60Hz3D Visualization of the Polyscience Recirculating CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. This Liquid-to-Air Recirculator continuously pumps near-ambient temperature water from a reservoir to an external heat source, through a cooling radiator, and then returns cooled water to the reservoir. By blowing ambient air over the radiator, water flowing inside is cooled and the heat is exhausted into the atmosphere.Features An economical solution for applications where cooling fluid temperature is higher than ambient and temperature control is not required NOTE: No compressor. Uses fan cooling of cooling fluid Quiet liquid-to-air cooling Positive displacement or turbine pump Built-in low liquid level indicator INCLUDED: The Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nXR60i NW25 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connecti (more)on NW40 Peak Pumping Speed 60 m 3h-1 Features - Delivers a peak pumping speed of 60 m³/h, ensuring efficient vacuum operations - Maintains a leak tightness of < 1x10⁻⁶ mbar l/s, ensuring reliable vacuum integrity - Weighs only 29 kg (64 lbs), facilitating easy transport and installation - Designed to fit under benchtops, optimizing laboratory space - Ensures a clean, oil-free operation, reducing contamination risks - Keeps the vacuum chamber free from dust, maintaining a clean environment - Offers design flexibility for R&D and industrial applications - Provides reliable vacuum performance over long periods, ensuring operational stability - Simple setup and operation make it accessible for users at all skill levels Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR60i NW25 Multi Stage Roots Dry Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

This system measures the growth of micro-organisms. This system features a unique incubator incorpor (more)ating a liquid circulation heat exchanger which provides constant temperatures to all wells, a linear shaker to assure good mixing in each well, a sensitive reader that measures turbidity, a technique more sensitive than a spectrophotometer. Additionally, the system is equipped with 8 filters to measure specific wavelengths, two covered honeycomb plates may be run at one time that makes it possible to run 200 samples simultaneously. Linear range: 0.0 – 2.0 A (max deviation <2%) Noise: max 0.002 A at 0.0 A Drift: max 0.003 A Resolution: 0.001 A Warm-up time: 30 min Light source: Quartz-Halogen lamp 8V/50W Filters: 405, 420, 450, 492, 540, 580, 600 nm and wide band filter 420 – 580 nm Half band with: 3 – 10 nm Detector: Silicon photocell Microplate type: Honeycomb 2 microplate, 100 wells per plate Capacity: 1 – 2 microplates Maximum volume: 400 µL/well Incubating temperature: 1.0 – 60.0°C, selectable with steps of 0.1°C. (Depends on the ambient temperatue. Bioscreen can go 6°C below or 30°C above ambient temperature up to a max of 60°C) Temperature uniformity: ± 0.1°C Heating time from 20°C to 30°C: 30 min Heat transfer fluid required: Mixture of ethylene glycol and water 1:1 Dimensions (WxDxH): 620 x 380 x 230 mm Weight: 22 kg

61,440 x Integra 1250 uL,5 VIAFLO 96 Racks of 96 Tips, Sterile, Filter (6445) These are sold on beha (more)lf of a client. The lot is brand new and unused. Quantity - Pallet of 32 boxes. 5 Racks in 1 Pack. 4 Packs in a Box.Make/Brand - Integra BiosciencesModel Number - 6445Product Number - 6445Exp Date - N/ASKU - TIP-1250SF-INT The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This Zeiss Axioskop Fluorescence Microscope System was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in good cosmetic condition but has some marks from use. Does not include PSU for the mercury lamp, but it has been tested. Included with it are; 2 x Eyepieces Zeiss Pl 10x/20 (44 40 32) 3 x objectives Zeiss plan-NEOFLUAR 100x/1,30 oil (44 04 81) PH3 Zeiss plan-NEOFLUAR 40x/0.75 oil (44 03 51) PH2 Zeiss plan-NEOFLUAR 20x/0.50 oil (44 03 41) Ph2

Terminal for Industry The PUE C315 terminal is intended for fast and precise presentation of mass me (more)asurement result. Taring available for the whole weighing range allows to swiftly and precisely determine net mass of weighed loads. An ABS plastic housing ensures durability and lightness of the construction. Uncomplicated Operation and Clear Presentation of Indications A clear 6-digit LCD display with backlight and pictograms provides clearly visible measurement result. Easy operation enables fast and reliable measurements to be carried out even by an inexperienced operator. Mobility due to an Internal Battery In addition to power supply from the mains, PUE C315 terminal is equipped with internal battery that enables several hours long mobile operation. Versatility of Use Various possibilities of fastening of the PUE C315 terminal to the weighing platform enable selecting appropriate solution for different places of operation. The terminal can be mounted next to the platform, on a post or using cable. ALIBI Memory Internal ALIBI memory guarantees safety and automatic record of measurements copies, it also offers possibility to preview, copy and archive data.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content &ndash; of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160&deg;C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer&rsquo;s accuracy and sensitivity. 10-Inch Display Bigger screen &ndash; 10&rsquo;&rsquo; &ndash; means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light &ndash; an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note &ndash; Note Down Your Conclusions It&rsquo;s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

IKA big squid white Speed Range 0 to 2,500 RPM Maximun load 3 kg Setting accuracy speed 50 rpm Featu (more)res - Durable glass surface. - Clear LED digital speed display for precise monitoring and control. - Electronically controlled motor enhances performance. - Wide speed range from 0 to 2,500 rpm for versatile stirring applications. - Turning knob for easy speed adjustment. - Protection class of IP 54 for moderate protection against solid objects and water ingress. The Big Squid White Magnetic Stirrer, is a powerful and versatile designed for use with a variety of applications. With its glass surface and exceptional chemical resistance, it offers durability and reliability. The digital LED speed display and electronically controlled motor ensure precise and efficient stirring. Its maximum stirring quantity of 1.5 liters and maximum load capacity of 3 kg make it suitable for larger volumes. The Big Squid White Magnetic Stirrer combines reliability, performance, and adaptability making it an essential addition to any laboratory.INCLUDED: The IKA big squid white includes: - IKA big squid white - Manufacturer's Documentation - 2 Year Manufacturer's Warranty