FMI Q Pump Head MCP BVP ISM 748 Ismatec FMI 019 PHM QB 226571

Vacuum pump KNF N035.3 AN.18 Final pressure/ultimate vacuum reading (abs.) (mbar): 127 mbar (see pho (more)to) Technical specifications: Voltage: 230 V, 50 Hz Current: 1.8 A Power: 150 W Pump flow rate: 30 l / min Equipment tested

Jeol JEM-1200 EX Pump and Pressure Tank This was removed from a university lab where it was surplus  (more)to requirements. The unit has not been tested. It is in good cosmetic condition with marks from use.

PFEIFFER Turbomolecular TMP Vacuum Pump TMH 260 This was removed from a university lab where I was s (more)urplus to requirements. The unit has not been tested but is in good cosmetic condition with marks from use. The turbo fan blade moves freely and are in good cosmetic condition. DN 100 ISO--K, 2PMod - Nr PM P02 13019 pin DIN MALE connector port is in good cosmetic condition. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

VACUUBRAND VACUU-PURE 10 Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed  (more)5.9 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - No abrasion - No wear parts The dry screw pump VACUU-PURE 10 reliably delivers the benefits of oil-free vacuum technology in the pressure range down to 10-3 mbar. VACUU-PURE 10 combines three important benefits for the user: 100% oil-free, no abrasion, and no wear parts. VACUU-PURE 10 is ideal for clean processes which require a dry and hydrocarbon-free vacuum. The spindles of the screw pump run contact-free and are thus free of abrasion and wear. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. The evacuation of even larger systems from atmospheric pressure down to the 10-3 mbar vacuum range can be done without changing the vacuum pump. VACUU·PURE easily handles high levels of vapor accumulation through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10 Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump Flow Rate Range 0.5 to 3L/min Ma (more)ximum Pressure 4 bar Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual and remote control - Self-priming, can run dry - Maintenance-free - Equipped with brushless DC Motor - Integrated overheating protection The KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual and analog controls. INCLUDED: The KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 12 mm - External Control Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Bohlin Instruments Water Bath Re-Circulator Model - KTB 50 This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up but we have not carried out any further tests on this unit as there are no clear temperature controls for the fluid. We suspect this must be controlled by a Bohlin Rheometer (which we do not have). It is in reasonably good cosmetic condition with some marks from use.

Conductivity measuring range: 0.01 μS/cm to 500 mS/cm Conductivity resolution: 0.01 – 1 Conductivity (more) accuracy: ±0.5 % Temperature Range: -5°C to 105°C Temperature resolution: 0.1°C Temperature accuracy: ±0.3°C Memory size: 200 measurements Data Transfer: PC, Printer Compatible with Intelligent sensor management (ISM): No Connectors: USB B, RS232, Mini-DIN Dimensions: 227 x 147 x 70 mm Weight: 0.63 kg

Philips XL30SEM Environmental Scanning Electron Microscope ESEM This is being sold on behalf of a c (more)lient The system was in working order about 5 years ago, but has since required a new PC and has not been used. It is in good cosmetic condition with minor marks from use. It is currently situated in Durham UK, and is available for collection, but we can likely arrange shipping if needed.

IKA RV 10 Digital Flex Rotary Evaporator Features - 4L Heating Bath with optimized heating bath volu (more)me allowing for fast-heat up - Left or right flask rotation with a speed range of 20 to 270 RPM - Features smooth start function along with a timer function - RS-232 digital interface for remote control and IR interface - Easy and safe operation due to ergonomical design of the user interface Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Safety temperature circuits are featured, along with Dry-run protection for an adjustable lower end stop and lock function for the heating bath The RV 10 digital represents the continual enhancement of the IKA RV 10 Rotary Evaporator line. The unit comes with a new universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1500 cm² surface extremely efficient. That’s why the RV 10 basic delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Furthermore, IKA offers a choice of coated glassware for increased safety needs. The RS 232 interface allows for remote control via IKAs “labworldsoft”. The Heating bath is controlled via the IR interface from the main unit. INCLUDED The IKA RV 10 Digital Flex Rotary Evaporator includes: - RV 10 digital - HB digital S099 Heating Bath - RV 05.10 Balljoint clamp - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Digital Flex Rotary Evaporator SpecificationsType of coolingverticalCooling surface0 cm2Motor principleDCSpeed range5 - 280 rpmReversible direction of rotationyesLiftMotorStroke140 mmHeating temperature rangeroom temp. - 180 °CHeat output1350 WSet temperature resolution1 ±KFilling volume max.4 lTimer yes Dimensions (W x H x D)500 x 430 x 440 mm Weight18.5 kg Permissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationIKA RV 10 Auto Pro FlexIKA RV 10 Digital FlexIKA RV 3 FlexIKA RV 8 FlexType of CoolingWithout CondenserVerticalN/AVerticalCooling Surface1500 cm²0 cm²N/A1500 cm²Speed Range5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorManualManualStroke140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight18.6 kg18.5 kg12 kg22.366 kgRS 232 InterfaceYesYesN/AN/AUSB InterfaceYesYesN/AN/AVoltage100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Gilson PIPETMAN M P10mLM BT Connected, 1-10mL Pipette Volume Range 1-10mL Adjustable or Fixed Volume (more) Adjustable Volume Pipette Type Electronic Air Displacement Features - Bluetooth-enabled electronic pipette enhances accuracy and precision in standard and repetitive pipetting modes - Reduces pipetting fatigue and increases efficiency with minimal force needed for aspiration and dispensation - Features motorized piston for high reproducibility and accuracy, reducing the risk of human error - Offers five pipetting modes: pipette, repetitive, mix, reverse, and custom with up to 10 programmable protocols - Bluetooth connectivity facilitates communication with TRACKMAN Connected, guiding through protocols with real-time feedback - Ergonomic design ensures comfort and ease of use, including a simple push-button operation and tip ejection The PIPETMAN M Connected is a Bluetooth-enabled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, PIPETMAN M Connected helps reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected making planning and executing pipetting protocols faster, easier, and more reliable. PIPETMAN M Connected is available in 20 models covering a volume range from 0.5uL to 10mL in single channel, and 0.5uL to 1200uL in multichannel. The motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, PIPETMAN M Connected reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette. The intuitive interface has five pipetting modes for many applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions. Aspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M P10mLM BT Connected, 1-10mL Pipette includes: - Power Supply 5V with AC Adapter and Cable - 4 Battery Side Tags - 4 Ejector Side Tags - Lubricant - Safety Bag - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty