Einhell pump

This Agilent Technologies 1200 Series HPLC G1312A Binary Pump was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

This was removed from a university lab where it was surplus plus to requirements. All units power up (more) but have not been tested further. The back light is dim but readable. It is in reasonably poor cosmetic condition with  marks from use. Included are; -Dolomite Mitos P-Pump-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor P-Pump model number- 3200016_6P-Pump serial number- 4903738 Sensor serial number- 4905118

Ultimate Vacuum 1x10-3 mbar Inlet Connection NW25 Displacement 25.0 m 3h-1 / 14.7 ft 3min-1 Features (more) - High ultimate vacuum and rapid pumping speed make it the industry standard for laboratory and light industrial applications - Quiet operation ensures a comfortable working environment, reducing noise in sensitive areas - Freestanding design with a flexible coupling driven by either a single-phase or three-phase (four pole) air-cooled motor for versatile use - Supplied with essential accessories, including 2 x 1 liter of Ultragrade 19 oil, O-ring and centering ring, two Allen keys, and spare seals for oil drain and filter plugs - Features a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces for reliable performance - Includes an oil distribution valve to prevent oil discharge to the pump interior after stopping, enhancing safety - Airtight pumping chambers prevent suckback unless the gas ballast valve is open, maintaining system integrity - Facilitates easy oil changes with an oil drain-plug for gravity or pressure oil drainage Edwards E2M18FX Vacuum Pump 115/230V The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open. You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain. Click Here to View Product Video INCLUDED: The Edwards E2M18FX Vacuum Pump 115/230V includes: - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty

KNF LABOPORT N 820 G Diaphragm Pump Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/min (1.2 m3/h) Pro (more)tection Class IP30 Features - 100% oil-free transfer – thereby pure transferring, evacuation and compression of gases - High level of vapor and condensate compatibility - Ideal for extremely aggressive/corrosive gases and vapors - ATEX compliant according to II 2/-G IIB+H2 T3 internal atmosphere only - Integrated gas ballast valve - Separators and/or condensers can be purchased individually at any time and easily fitted, enabling users to build their own customized vacuum system - 3-color status display for in operation, stand-by, and error - Integrated rotational speed control - Environmentally friendly - Start against ultimate vacuum of the pump The KNF LABOPORT N 820 G Diaphragm Pump is an exceptional choice for laboratory applications, boasting a chemically resistant, compact design. This oil-free pump ensures pure transferring, evacuation, and compression of gases, thanks to its 100% oil-free operation. It is especially suitable for handling extremely aggressive or corrosive gases and vapors, highlighting its high vapor and condensate compatibility. The pump features manual speed control, allowing users to tailor the pump capacity to specific needs, and an integrated gas ballast valve for enhanced performance. Constructed with PTFE/TFM heads, PTFE-coated diaphragms, and FFPM valves, it ensures durability and reliability in demanding environments. Additionally, the pump is ATEX compliant for internal atmospheres, ensuring safety in hazardous conditions. It offers the flexibility to add separators and/or condensers individually, allowing users to customize their vacuum systems. The 3-color status display indicates operation, stand-by, and error modes, while the integrated rotational speed control adds to its user-friendliness. The pump's ability to start against the ultimate vacuum and its environmentally friendly design further enhance its appeal for a wide range of laboratory applications. INCLUDED: The KNF LABOPORT N 820 G Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-7 hPa / 7.5  (more)x 10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 67 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution for high vacuum applications. It offers user-friendly operation via a 7-inch touch display, with remote control capabilities through a web server. Designed for reliability and versatility, this system handles a wide range of demanding tasks. Featuring a final pressure of 1 x 10⁻⁷ mbar (7.5 x 10⁻⁸ Torr) and a maximum pumping speed of 1.8 m³/h, it ensures efficient and consistent vacuum generation. Equipped with the Pfeiffer MVP 030-3 diaphragm backing pump and the HiPace 80 Neo turbopump, this unit provides a pumping speed of 67 l/s for nitrogen. It operates quietly, with an emission sound pressure level of ≤50 dB(A), and is suitable for worldwide use with its wide range of input voltages (100-240 V AC). The air-cooled system, compact design, and flexible connection options make it an ideal solution for various high-vacuum needs. INCLUDED: The Pfeiffer HiCube 80 Neo, 63 ISO-K, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 Ultimate Vacuum 1 x 10-3 mbar / 7.5 (more) x 10-4 Torr Inlet Connection NW25 Flange Displacement 38.9 m3h-1 / 22.3 ft 3min-1 Features - Displacement of 32.2 m3/h at 50 Hz and 38.9 m3/h at 60 Hz - Maximum pumping speed of 27.5 m3/h at 50 Hz and 33.0 m3/h at 60 Hz - Ultimate vacuum of 1 x 10-4 mbar partial pressure and 1 x 10-3 mbar total pressure - Thermal overload protection with automatic motor reset - Mass spectrometer compatibility for applications like gas analysis and leak detection - Oil-sealed two-stage rotary vane pump with sight-glass and drain-plug for easy maintenance - Maximum water vapor inlet pressure of 30 mbar - Rotational speed of 1440 rpm at 50 Hz and 1720 rpm at 60 Hz The Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 is a high-performance two-stage, direct-drive vacuum pump designed for precise and reliable operation in laboratory and industrial environments. With a displacement of 32.2 m³/h at 50 Hz and 38.9 m³/h at 60 Hz, it delivers a maximum pumping speed of 27.5 m³/h and 33.0 m³/h, respectively. Its ultimate vacuum capabilities include 1 x 10⁻⁴ mbar partial pressure and 1 x 10⁻³ mbar total pressure, ensuring optimal performance for demanding applications. The pump features an oil-sealed design with an integrated sight-glass and drain-plug for easy maintenance, along with thermal overload protection that automatically resets the motor after cooling. Built for versatility, the Edwards E2M28 supports a maximum water vapor inlet pressure of 30 mbar and operates at rotational speeds of 1440 rpm at 50 Hz and 1720 rpm at 60 Hz. Its robust construction includes a fully enclosed motor with a cooling fan to maintain efficient operation. Designed for compatibility with a range of systems, this vacuum pump is ideal for gas analysis, leak detection, mass spectrometry, electron microscopy, and other critical processes. The E2M28 offers dependable performance with features tailored for long-term use and minimal maintenance.Click Here to View Product Video INCLUDED: The Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 includes: - Edwards Ultragrade 19 Oil - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Applied Biosystems ABI Prism 7900HT This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but has the following issues. The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues. It is sold for spares/repairs. The PC is included. Dell Optiplex PCDell 17" MonitorKeyboard & MouseUSB CableDVI Cable All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.

Hermle 100ml Inserts for Z326-100H Rotor (2pk) The Hermle 100ml Inserts are for use with the 4 x 100 (more)H Swing Out Rotor for the Z326 and Z326 K centrifuges. INCLUDED: The Hermle 100ml Inserts for Z326-100H Rotor (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex TC1000-S Thermal CyclerThe Scilogex TC1000-S Thermal Cycler delivers high performance, high (more) throughput with easy programming via the color LCD touch screen display. Excellent temperature uniformity and high speed ramping rates with outstanding heat conductivity. Ideal for 96 x 0.2mL PCR tubes or 96-well plates. INCLUDED: The Scilogex TC1000-S Thermal Cycler includes: - 96 Well Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Temperature range: 12°C to 2°C Gross capacity: 425 liters Usable net content: 303 litres Material: s (more)tainless steel Dimensions (WxDxH): 600 x 731 x 2000 mm Weight: 114 kg

The terminals are intended to designing scales with maximum resolution of 6000 e. PUE 5 series, simi (more)larly to the basic model, are enclosed in a stainless steel housing which allows for reaching the highest IP rating, i.e. IP 67. The terminals come standard with interfaces: 2 × RS232, 1 × RS485, 1 x Ethernet, 4 x USB 2.0. PUE 5 series can be extended by additional 3 weighing modules for simultaneous operation of maximum 4 weighing platforms. Intended Use: The terminal PUE 5 series is a multifunctional weighing device. It combines the best features of a PC computer and a scale. The PUE 5 operates on basis of OS Windows, creating the best option for configuring the device to individual customer requirements through installing corresponding application. If applied with dosing or formula making systems, the PUE 5 allows for operation with multiple weighing platforms, and simultaneous dosing with full process control. A dosing or formula making system that is configured on basis of the terminal PUE 5 series does not require an additional PC computer. Database editing is possible from the level of PUE 5 touch screen display or an optional PC keyboard. Area of Use: Main applications for terminal PUE 5 series: Designing industrial load cell scales; Multiple weighing applications supervised by a computer system through Ethernet module; Possibility of connecting large quantity of additional weighing platforms to industrial terminals. Terminal type: PUE 5.15IR – infrared touch screen technology. IP67 protection class. Very high brightness and readability level. High resistance to moisture and dust. Very good mechanical resistance, operation in gloves enabled (material: latex, fabric or steel chain).

Eppendorf Thermomixer Comfort with block MTP for microplates. Digital display. Programable. Mixing f (more)requency from 300 to 1.400 rpm. Orbit 0.3 cm. Temperature Range from ambient -13°C to 99°C. Heating rate 5 ºC/min. Cooling rate 3 ºC/min. Accuracy ±0.5 from 20 to 45, ±2 below 20 and above 45°C. Timer from 1 min to 9:59 hours or continuous operation. It shows some signs of heavy use. User manual. The Eppendorf Thermomixer Comfort with MTP block for microplates can mix and temper microplates at the same time. Applications include enzymatic reactions, transformation, DNA, RNA, and protein manipulation, bacterial cultures, immunoprecipitation, and hybridization, among others.