Edwards RV3 Rotary Vane Vacuum Pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND MD 4C NT Chemistry Diaphragm Pump Ultimate Vacuum 1.5 mbar Max. pumping speed at 60 Hz  (more)2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance. Three-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with high vacuum requirements. Typical applications are parallel and rotary evaporators, concentrators, drying ovens and many other laboratory applications. The MD 4C NT has an outstanding performance for pumping large amounts of vapor, e.g., out of drying ovens and gel dryers. This powerful pump is at the heart of a complete family of well-proven and reliable vacuum systems and pumping units for larger lab applications.INCLUDED: The VACUUBRAND MD 4C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VACFeatures -  (more)Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3T1-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump Flow Rate Range 1 to 100 ml/min  (more)Programmable Dosing 1 to 999 ml Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Cycle mode - Adaptable to fluid characteristics - Start/Stop through logic control (TTL) - Reset/Prime through logic control (TTL) - Output signal fault alarm The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump is liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual, analog, and RS-232 controls with LCD graphic display. INCLUDED: The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel The Gilson MINIPULS 3 Peristaltic Pump Head (more), R4 Four Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R4 Four Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Chamber dimensions (Ø x depth): 500 x 500 mm Capacity: 117 L See for additional info: https://www.sy (more)stec-lab.com/autoclaves/vertical-top-loading-autoclaves-40-150-l/

This Anton Paar AMVn Automated Micro-Viscometer was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Included with it is an instruction manual.

MARSHALL Select MS-OT40LE Overhead Stirrer, 40L Maximum Stirring Quantity 40L Speed Range 50 to 2,2 (more)00 RPM Maximum Viscosity 50,000 mPas Features - High torque of 60 Ncm suitable for viscous medium stirring - Brushless DC motor ensures long life, maintenance-free operation, and safety in explosive environments - LED display for precise monitoring of actual speed - Over torque protection and safety circuits provide safe stop functions in anti-stall or overload conditions - Large chuck diameter supports many shaft types, increasing versatility - Through-shaft design allows for easy adjustment of the impeller position - Automatic resumption of stirring at preset speed after power loss - IP21 protection class offers basic protection against solid objects and dripping water - Analog speed controls displayed on the LED for easy adjustments and monitoring - Designed to accept pass-through stirrer rods for flexible setup options - Visual alarm alerts for immediate notification of system issues or malfunctions - Explosion-proof motor enhances safety in volatile environments The MARSHALL Select MS-OT40LE Overhead Stirrer stands out for its high reliability and superior performance, engineered to manage stirring tasks up to 40L. It features a versatile speed range from 50 to 2,200 RPM, suited for a wide variety of laboratory needs. This stirrer is equipped with a brushless DC motor, renowned for its long life, maintenance-free operation, and explosion-proof qualities. The MS-OT40LE includes an LED screen that displays the actual speed, ensuring precise control over your mixing processes. It's capable of handling high viscosities up to 50,000 mPas with a maximum torque of 60 Ncm, making it ideal for stirring viscous mediums. The large chuck diameter supports many shaft types, enhancing its adaptability. Safety is a paramount feature of this device, with integrated circuits that provide a safe stop function in conditions of anti-stall or overload, where over torque protection automatically stops the motor. Additionally, the through-shaft design allows for easy adjustment of the impeller position to suit varying laboratory needs. In the event of a power outage, the stirrer automatically resumes operation at the preset speed once power is restored, ensuring continuity and efficiency. The IP21 protection class provides basic protection against solid objects and dripping water, further securing the unit in active laboratory environments. INCLUDED: The MARSHALL Select MS-OT40LE Overhead Stirrer, 40L includes: - Key of Drill Chuck - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus PR523N/E PR Series Precision BalanceOffering accuracy and repeatability in essential weighing  (more)applications in laboratory, industrial andeducation settings, PR Analytical and Precision Balances deliver competitive performance at aneconomical price. Featuring RS-232 connectivity for easy communication, and a backlit display and asimple interface for uncomplicated operation, the PR is perfectly designed for your workplace. The PR is equipped with three essential weighing modes, RS-232 connectivity for datatransfer and storage, making it ideal for routine weighing applications. Equipped with an easy-to-read, bright backlit display and a simple user interface,the PR is incredibly easy to operate, with almost no training required. The PR’s small footprint saves desktop space while providing a large weighingsurface. The PR is durably constructed, and features a stainless steel panto withstand day-to-day use in the workplace. Click Here to View Product Video INCLUDED: The Ohaus PR523N/E PR Series Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty