Edwards nXDS6iR Dry Scroll Pump

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101  (more)Vibration frequency: 0 - 300 min⁻¹ Heating power: 1500 W Temperature Range: Up to 100°C W×D: 480×487 mm Included: Rack R-12 Polyvap (120ml) A condensation unit and bottle A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dolomite Mitos P-Pump System With Remote Chamber 400 + Flow Rate Sensor This was removed from a univ (more)ersity lab where it was surplus plus to requirements. All units power up but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Includes: -Dolomite Mitos P-Pump-Dolomite Mitos Remote Chamber 400-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor-P-Pump user manual P-Pump model number- 3200016_4P-Pump serial number- 1600682 Chamber serial number- 1600843 Sensor serial number- 160880

Thermo Finnigan Surveyor HPLC System, Autosampler, PDA Detector & LC Pump This was removed from  (more)a university lab where it was surplus to requirements. The system powers up but has not been tested further at our facility. It is in very good cosmetic condition with minor marks. Included are; ThermoFinnigan Autosampler SurveyorModel: AutosamplerSerial#: 77184Year: 2002 ThermoFinnigan PDA Detector Model: PDA DetectorSerial#: 56847Year: 2002 ThermoFinnigan LC Pump SurveyorModel: Surveyor MS PumpSerial#: 62911Year: 2003

KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit (more) most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Thermo Scientific Finnpipette Stepper 4540 Pipette 3-Pack 10 to 5,000 µL It allows you to quickly pe (more)rform up to 45 successive dispensings without having to reload it. This lightweight, easy-to-use repeating pipette is designed for one-handed dispensing. Model: 4540 Volume: 10 to 5,000 µL

Manufacturer: Environics-IUT Model: ENVI-Air GC-IMS-Analyzer S/N: IM0911.120011 YoM: 2012 Descripti (more)on: The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air. It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance. The ENVI-Air can detect hazardous gases at far lower concentrations than traditional analyzers and react in real-time. This gives the operator a longer safe response window to take corrective action.It is based on GC-IMS technology. Ion Mobility Spectrometry (IMS) is a simplified atmospheric pressure time-of-flight technique that is highly selective with low ppb to % sensitivity. The GC-IMS adds multi-component separation prior to the IMS analysis. ENVI-Air does not require the use of paper tape, pre-concentrators or chemical reagents.The ENVI-Air is an industrial solution virtually drift free and unaffected by humidity or temperature changes and will be factory calibrated for the compounds of interest for maximum accuracy and reliability. Because of the simplicity of design and limited moving parts, ENVI-Air analyzers will have the lowest maintenance and downtime of any current analyzer system. Measurable Compounds: Ammonia, Acetone, Acrylonitrile, Acetonitrile, Arsine, Benzylchlorid, Bromine, Chlorine, Chlorocyane, BTX, CMME, Ethylene Oxide, Dibutylphthalat (DMP), Dimethylsulfat, HFPO, Hydrazin, Hydrogen Chloride, Hydrogen Bromide, Hydrogen Fluoride, Hydrogen sulfid, TDI, Methyl Bromide, Isopropyl alcohol, Methyl Iodide, Nitrogen dioxide, NMP, PFIB, Phosgene, Phosphine, PGME, PGMEA, Sulfur Dioxide, Triethylamine, Vinyl Chloride. Areas of application: - Oil and Gas Production- Plastics Manufacturing- Semiconductor Fabrication- Chemical Production- Pharmaceutical Manufacturing- Gas Pipeline Safety- Medical Sterilization- Primary Metal Processing Specifications: - Detection Principle: Gas Chromatography - Ion Mobility Spectrometry (IMS)- Ionization: Tritium (3H) No Licence or Wipe Tests Required- Sensitivity: Low ppb range- Moisture: 0% to 90% RH- Warm Up Time: 20 minutes- Measurement Time: Seconds- Power: 220 VAC/19VDC - Carrier Gas: No Carrier Gas Required- Operation Temperature: -10°C to +50°C- Storage Temperature: -40ºC to +50ºC - Enclosure: 19” Rack Mount- Power: 220 VAC/19VDC - Dimensions (L x W x H): 483 x 381 x 89 mm - Weight: 6.44 kg Items delivered: - Environics-IUT ENVI-Air GC-IMS-Analyzer- Instruction manual Condition: The item is in perfect coasmetic as well as operarting condition. It is 100% functional teasted and ready to be used.

Syringe Size: From 10 µl to 50/60 ml Flow Rate Range (Min/Max): 0.0014 µl/hr with 0.5 µl syringe to  (more)26.55 ml/min with 50/60 ml syringe Maximum Force: 8 kg Maximum Pressure: 8 p.s.i. with 50/60 cc syringe; 100 p.s.i. with 1 ml syringe Step Rate (Min/Max): 1 pulse in 27.6 sec / 200 steps/sec Pusher Advance/Step: 0.8 µm pusher advance per motor step Pusher Travel Rate (Min/Max): 0.7 µm/min to 15 mm/min Dimensions (HxWxD): 114 x 229 x 114 mm Weight: 2.1 kg

This CTC Analytics HTC PAL MXY 04-01A Autosampler System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition. Any issues with the individual modules are listed below. Included in the system are; 1x CTC Leap Technologies AutosamplerModel MXY 04-01A 1x CTC Injection UnitModel No. MZ 01-00F 1x CTC Stack Cooler DWModel MC 04-01 Rev. GThe drawer doors have come away (plastic screws snapped) 1x CTC Power SupplyPart No. MN 01-00 1x CTC Pelter ThermostatPart No. MN 03-00 1x CTC TerminalModel No. 01-00A 1x CTC Injection Valve Drive unitModel No. MV 02-01A 1x CTC Arm PlatformModel No. MR 034-02B 1x Motor Assembly Syringe PalModel No. MM 01-01F 1x Active Reverse Rinse UnitSer No. SDS1208007 1x XP power supplyModel AED45US24 1x Syringe Holder:Model No. MSU 014-00A The unit is in good cosmetic condition. 1x Citation High Performance Sample LoaderThe PC powers on and is in good cosmetic condition. There is a Leap Technologies program on the Sample loader Other Control Programs:• Solvent Conditioner Control 2.16•One Minute NMR 2.18.43•Citation Control 2.4 1x Protasis Desgasser 1x Reloatable Power TapModel PDU20BHVIEC 10R 8x IEC ports Accessories: 2x PAL System X Type Syringes:Part No. 20452/01 • 100µl Hamilton Gas tight glass Syringes2x 5.0ml 1x 1000µl 1x 0.25µl The units are in good cosmetic condition. 1x L-Mark glass Syringe:F/N 0.72(G22s)b51•50µl The unit is in good cosmetic condition (with needle) 100ml Wheaton Glass bottles: 3x with lids2x without lids The units are in good cosmetic condition. 500ml Glass bottles1x Simax (with lid) 1x Boro 3.3 (without lid) The units are in good cosmetic condition.

A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) Capacity 220 g Re (more)adability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Impact-alert visually and audibly indicates the magnitudes of impact shocks - Shock-log documents date, time, and shock level - Internal Auto calibration or with easy one-touch button - performs and documents internal calibration - Password-Protect – offers password-protection up to 11 users and 1 administrator - GLP/GMP/GCP Compliance with full calibration reports - Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination - Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet - Six straightforward keys – ON/OFF | REZERO, CAL, MODE, SAMPLE, PRINT, TARE - Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility - Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional) - Stainless steel pan and dust-plate can be easily removed for cleaning - Die-cast aluminum housing provides extra stability and durability - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I), delivers precision in regulated environments with its 220 g capacity and 0.0001 g readability. This balance is NTEP certified, ensuring compliance and accuracy for legal-for-trade applications. It enhances productivity with a fast stabilization time of approximately 2.0 seconds and supports stringent compliance needs, including USP41, with features that alert users when sample sizes fall below minimum requirements, effectively reducing waste and increasing efficiency. Designed to simplify routine checks and increase operational efficiency, the GX-224AN includes an Electronically Controlled Load (ECL) management system. This system performs repeatability testing and automatic precision checks internally without the need for external weights, thereby enhancing the reliability of measurements. The balance is equipped with six straightforward keys and offers a quick toggle switch between USB and RS-232C communication options, facilitating seamless integration into existing data management systems. For ease of use, the GX-224AN features an illuminated, front-mounted level that ensures quick and accurate leveling, even when operators are wearing gloves. It incorporates automatic self-calibration and one-touch internal/external calibration, guaranteeing valid results every time. The balance's robust construction and comprehensive measurement capabilities—including percent calculation and piece counting—make it ideal for a wide range of scientific applications. This analytical balance, with its precise measurement technology and legal-for-trade certification, stands as an excellent choice for professionals requiring dependable, high-performance tools in regulated settings. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) includes: - External Key Jack - Large Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Benchmark D1000-M14 Optional generator 14mm x 130mm saw tooth, for 50ml tubes up to 250ml vessels Th (more)e Benchmark D1000-M14 Optional Generator is a specialized tool designed for use with the Benchmark D1000 Homogenizer, specifically for homogenizing samples in 50 ml tubes and vessels up to 250 ml in size. With dimensions of 14mm x 130mm, this generator is a 14 mm saw tooth attachment that fits easily onto the homogenizer. The saw tooth design ensures efficient and thorough homogenization of samples, while the length of the generator allows for homogenization of larger sample volumes. INCLUDED: The Benchmark D1000-M14 Optional generator 14mm x 130mm saw tooth, for 50ml tubes up to 250ml vessels includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty