Edwards E2M28 Vacuum Pump Vakuumpumpe

Edwards nXDS10iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS10iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS10iC Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Heidolph Hei-FLOW Expert 120 Peristaltic Pump Package w/ Adaptor for Multi-Channel Pump Heads The pu (more)mp drive of the model 01 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are in the range of 0.38 — 813 ml/min; with multi-channel pump heads from 0.005 — 329 ml/min.By integrating an analog interface, it is possible to control all functions externally. In addition, an optional foot switch can be adapted to enable dosing by foot pressure. Hands thus remain free to perform other work, for example, to hold the tubing and the vessel.A speed of 5 — 120 rpm with a control accuracy of ±3.5% guarantees optimum process results. Features:- Increase your throughput by running up to 12 individual cassettes on one single pump drive and pump head system - Separate metering into multiple vessels with different feed rates in a single operation by using different tubing dimensions to adjust flow rate - Save time: tubing change is done in just seconds - In addition to standard pump heads which feature a 4-roller system you can choose 8-roller pump heads for low pulsation - Change your cassettes easily, even during operation – there are no restrictions - Cassette adjustments and changes are simple, just click in place - No additional purchase of a pump drive needed: upgrade your single-channel pump drive with just one adaptor for multi-channel use and pick the head/cassette configuration that matches your application needs Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Expert 120 Peristaltic Pump Package w/ Adaptor for Multi-Channel Pump Heads includes: - Heidolph Expert 120 Peristaltic Pump - Adaptor for Multi-Channel Pump Heads - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-7 hPa / 7.5 x  (more)10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 35 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station is a compact and reliable solution for high vacuum applications. With a final pressure of 1 x 10⁻⁷ mbar and a pumping speed of 35 l/s for nitrogen, it delivers efficient vacuum generation. The MVP 030-3 diaphragm backing pump operates at 1.8 m³/h, with air-cooled forced convection ensuring optimal performance. Its quiet operation, with an emission sound pressure level of ≤50 dB(A), and global compatibility make it suitable for a wide range of environments. Designed for ease of use, the HiCube 80 Neo features a 7-inch touch display and offers remote control via a web server. It’s equipped with a HiPace 80 Neo turbopump and supports flexible operation through its DN 40 ISO-KF connection flange. With a robust design and versatile input voltage range (100-240 V AC), this pumping station is ideal for demanding laboratory or industrial settings, ensuring reliability across a variety of applications. INCLUDED: The Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Syringe Size: From 10 µl to 50/60 ml Flow Rate Range (Min/Max): 0.0014 µl/hr with 0.5 µl syringe to  (more)26.55 ml/min with 50/60 ml syringe Maximum Force: 8 kg Maximum Pressure: 8 p.s.i. with 50/60 cc syringe; 100 p.s.i. with 1 ml syringe Step Rate (Min/Max): 1 pulse in 27.6 sec / 200 steps/sec Pusher Advance/Step: 0.8 µm pusher advance per motor step Pusher Travel Rate (Min/Max): 0.7 µm/min to 15 mm/min Dimensions (HxWxD): 114 x 229 x 114 mm Weight: 2.1 kg

Double-headed, chemically resistant, dry-running diaphragm pumps for a wide range of laboratory appl (more)ications. For conveying and evacuating, without affecting the media. • 100% oil-free transfer, so that the media cannot be contaminated during pumping, evacuating or compressing • Very suitable for vapours and condensates • Suitable for slightly aggressive and corrosive gases and vapours • Maintenance-free, environmentally friendly • Flow rate: 34 L/min (at atmospheric pressure) • Working pressure: 1.0 bar • Final pressure (abs): 8 mbar Dimensions (DxHxW): 341 x 226 x 166 mm Weight: 12 kg

Thermo Vacuum Generators High Vacuum Deposition Sputtering System Lab This system was removed from a (more) university lab where it was surplus to requirement. The previous client has stated that it was in full working order when last used, reaching 10<sup style="color: rgb(51, 60, 68); background-color: rgb(255, 255, 255);">-9</sup> mbar vacuum.It is in good cosmetic condition with all units included in good working order. The system comprises the following components: - Thermo Vacuum Generators main reaction chamber Serial No. CH0412005- 2 x Softshut gate units Part No. V10EA100 Serial Nos. SS0412002 SS0412003- Leybold Turbovac Pump Serial No. 30000045767 - Pfeiffer Vacuum compact cold cathode gauge Type IKR261 BOC Edwards EXT75DX turbomolecular high vacuum pumpSerial No. 046074705- 3 x Luftkuelung pump cooling fans - 3 x Vulcatherm V1 1000W heaters - 2 x Elstein FSR 1000W heaters - RHC Vacuum Generators ZRHC substrate heater controller Serial No. RC0407002- Turbotronik NT20 and NT10 analysis chamber and load lock control unit Serial No. 30000050971- Thermo Electron AML pressure gauge controller Serial No. 0006- Thermo Electron 8558 argon etch gun controller Serial No. G117- Hiden Analytical ion gun turbo interface - Pfeiffer ion gas gun gauge - Power breaker circuit box - Leybold vacuum pump Type D16B serial No. 30000044357 - Edwards vacuum pump E2M1 serial No. 046078290 - Leybold vacuum pump type S1.5 serial No. 20900831099 Additional parts: - 2 x 16 amp cartridge fuses - 14 x 2 amp cartridge fuses - 1 x filament for ion gauge DC7033AA - 2 x air 1/4" tee pieces - 1 x pfeiffer seal for ion gun BN846241-T - 4 x resistor filaments - 1 x Kurt J. Lesker 500g net tin of molecular sieve 1/8" pellets Type 13x Operating and instruction manuals: - Thermo EX03 Ion Gun System - Thermo High Pressure Gas Cell - Arun Microelectronics Pressure Gauge Controller Interface - Pfeiffer Vacuum TPG261 - Varian MidiVac Controller 929-x - Varian Sublimation Controller 929-x - Leybold Turbovac - Leybold turbotronik NT20 - NT10 - Eurotherm 2132 and 2166 PID Temperature Controllers

Accuris W1101-6-100 Class E2, Calibration Set for Analytical Balances Weight Set is ideal for calibr (more)ation of analytical balances with a 0.0001g readability. Precision manufactured from high purity, 316 stainless steel (7.96kg/dm³), these weights are corrosion resistant with magnetic susceptibility <0.005. The set includes 6 weights, 1x100mg, 1x10g, 2x20g, 1x50g, 1x100g, for checking repeatability, cornerload, linearity and span. The weights are supplied in a protective case with tweezers, a cleaning cloth and a certificate of verification. INCLUDED: The Accuris W1101-6-100 Class E2, Calibration Set for Analytical Balances, 6 pcs: 1x100mg, 1x10g, 2x20g, 1x50g, 1x100g includes: - Accuris W1101-6-100 Class E2, Calibration Set for Analytical Balances, 6 pcs: 1x100mg, 1x10g, 2x20g, 1x50g, 1x100g - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex 100-1000ul MicroPette Universal Sterile Filtered Tips Volumes from 0.2to 10000ul. Available (more) in bulk packs, racked and racked-sterile. MicroPette Tipsare made from high purity virgin polypropylene and are designed for use in awide variety of pipetting applications. They are tested for compatibility withEppendorf®, Gilson®/Rainin®, and Thermo Labsystems/Finnpipette® pipettes INCLUDED: The Scilogex 100-1000ul MicroPette Universal Sterile Filtered Tips includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MARSHALL Select MS-OT40LC Overhead Stirrer, 40L Maximum Stirring Quantity 40L Speed Range 50 to 2,2 (more)00 RPM Maximum Viscosity 50,000 mPas Features - High torque output of 60 Ncm ensures effective mixing performance - Features brushless DC motor for longevity and maintenance-free operation - Slow start-up function to prevent spills and splashes during use - LCD display for real-time monitoring of speed and torque - Through-shaft design allows for easy adjustment of the impeller position - RS232 interface for PC control and data transmission - Safety circuits include automatic stop in anti-stall or overload conditions - Visual alarms for overload protection enhance safety during operation - Torque trend display provides real-time information on viscosity changes - Capable of accepting pass-through stirrer rods for versatile setup options - IP21 protection class ensures basic protection against solid objects and dripping water The MARSHALL Select MS-OT40LC Overhead Stirrer is designed to handle stirring capacities up to 40L, making it ideal for extensive laboratory applications. It operates within a speed range of 50 to 2,200 RPM with a high control accuracy of ± 3 RPM, supported by a robust brushless DC motor. The stirrer offers a maximum viscosity handling of 50,000 mPas and a torque output of 60 Ncm, ensuring effective mixing even with thick samples. Equipped with an advanced microprocessor, the MS-OT40LC provides precise speed control and includes features like a slow start-up to prevent spills and a safety circuit for overload conditions, which automatically stops the motor. The MS-OT40LC’s through-shaft design facilitates easy adjustment of the impeller position, enhancing the flexibility and efficiency of mixing operations. The LCD display allows for real-time monitoring of both set and actual speed and torque, ensuring constant performance even as sample viscosities change. Additional features include an RS232 interface for PC control and data transmission, and visual alarms for overload protection. The IP21 protection class signifies basic protection against solid objects and dripping water, making this stirrer a dependable choice for busy laboratory environments. INCLUDED: The MARSHALL Select MS-OT40LC Overhead Stirrer, 40L includes: - Key of Drill Chuck - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

AIR, O2, CO2