Edwards E2M1.5 Vacuum Pump

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition, and powers on, we are unable to test it further at our facility. This item is fitted with 3-Phase 32amp plug.

This Edwards 8 E2M8 Two Stage Rotary Vane Vacuum Pump was removed from a university lab where it was (more) surplus to requirements. The unit has been professionally serviced and is in full working order. It performs to 3.5 x 10 - 3. It is in good cosmetic condition with minor marks.

Edwards mXDS3 Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5 m (more)^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3 Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards E1M18 Vacuum Pump Ultimate Vacuum < 3x10-2mbar Inlet Connection NW25 Displacement 25.0 m3 (more)h-1 / 14.7 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards E1M18 Vacuum Pump The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open.You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.Click Here to View Product Video INCLUDED: The Edwards E1M18 Vacuum Pump includes: - 2 Liters of Ultragrade 19 Oil - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty

Program list: See photo’s Maximum allowable pressure: 2.8 bar Maximum allowable temparature: 142°C W (more)ater supply: Distilled or deionized water Average water consumption per cycle: 3.5 L Required air supply: 3 – 6 bar Maximum load: Instruments – 30 kg, Textiles – 17 kg, Liquids – 21 Liter Chamber volume: 84 L Chamber dimensions (⌀xD): 413 x 610 mm Dimensions (WxHxD): 735 x 945 x 600 mm Weight: 170 kg

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

Yamato RFC-2001 Lab Freezer/Refrigerator Combo 4C, -20C, 115V Temperature Setpoint Range Freezer -20 (more)ºC / -4ºF Capacity 1982L / 70 cu.ft. Defrost Method Automatic Features - Digital temperature display - High/Low alarm - Two solid locking doors - Auto or manual defrost available - Locking casters - Adjustable shelves - CFC-free refrigerant and insulation - UL listed - Stainless exterior / interior available - Optional chart recorder Laboratory refrigerator and freezer combination unit that comes standard with microprocessor digital controller, audible and visual alarms, alarm relay contacts, casters, and locking doors. INCLUDED: The Yamato RFC-2001 Lab Freezer/Refrigerator Combo 4C, -20C, 115V includes: - Four Adjustable Shelves - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 5 kg), wooden box Number of pi (more)eces in the set: 28 Weights 1 g i 2 g – solid masses without adjusting chamber

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

IKA RV 8 V-C Rotary Evaporator Type of Cooling Vertical Speed Range 5 to 300 rpm Heating Temperatur (more)e Range Room Temp. to 180 °C Features - New: 4 l heating bath - integrated safety lift-out function in case of power failure - package includes Woulff bottle - water/oil heating bath with carrying handles - locking button for fixing heating bath temperature - clearly legible, glass-covered, black-and-white displaypanel - locking mechanism: red indicator shows unlocked position ofthe vapor tube - manual lift for precise positioning of the glassware - adjustable immersion angle - single-handed manual lift handling, suitable for left andright-handed operators - speed range: 5 - 300 min-1 - low device voltage (24V) ensures user safety - flask clamping mechanism with integrated push-off functionfor easy exchange of evaporation flasks - high-efficiency condenser with 1500 cm² cooling surface -low space requirements - compatible with the entire range of IKA RV 10 glassware The RV 8 Rotary Evaporator is the manual basic model in thefamily of IKA Rotation Evaporators. It finds a multitude of uses in thechemical, pharmaceutical, and biotechnology industries, in research anddevelopment, in manufacturing and quality assurance, in laboratories, and inplant construction. Thanks to specially designed glass guides, the verticalcoated condenser makes extremely efficient use of the 1500 cm² cooling surface.Digital displays for speed and heating bath temperature enable optimum controlof all distillation processes.