Gilson PIPETMAN M Multichannel P12x200M BT Connected Pipette

This pack of tips was removed from a lab store as surplus to requirements. There are 20 packs of 96  (more)tips contained within each pack. Each pack is sealed and unused. Packaging20 x 96 tipsCompatibility96/300 Versette Pipetting HeadVolume (Metric)300μLFilteredFilteredSterilitySterileLength (English)StandardFor Use With (Equipment)Thermo Scientific™ Matrix Hydra DT, Thermo Scientific™ PlateMate Plus, Thermo Scientific™ VersetteProduct LineD.A.R.T.'SUnit Size-

Perkin Elmer JANUS G3 Automated Workstation Lab This item was removed from a university where it was (more) surplus to requirement. It is in very good cosmetic condition and working order. Please note that the unit has shipping locks in place and should not be powered up with these in place. The user log-in information for the included PC is available on request. This system comprises the following: - Perkin Elmer JANUS G3 Automated Workstation - PC, Monitor, Keyboard & Mouse - WinPREP software installed on PC - PerkinElmer Peri Pump - Ducting - 2 x Waste bottle - Plate support tiles - Trough holders - NewLand Scanner - 10 packs of conductive filter tips - Ares 2000RT conversion rack

Precision suction, error-free measurements The product is supplied with two internal pumps and two b (more)uilt-in buttons used to operate separate pumps. Backlit buttons inform you about operation of a specific pump. The set has two tips for sucking water out of a single beaker (one-channel tip) or four pipettes at a time (four-channel tip). Water is carried from both channels to the beaker through one tube. The power is provided to the pump through a USB A in the weighing terminal. You can supply power from the phone charger, for instance.

IKA Pette Vario 0.1 - 2ul Pipette Features - Improved ergonomics as a result of replaceable handles (more) ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 0.1 - 2ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 0.1 - 2ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range0.1 - 2µlIncrements0.002 µlAccuracy (Nominal Volume µl / %) ± 0.028 µl / 1.4%Precision (Nominal Volume µl / %)± 0.014 µl / 0.7%Accuracy (50% of Nominal Volume µl / %)± 0.025 µl / 2.5%Precision (50% of Nominal Volume µl / %)± 0.015 µl / 1.5%Accuracy (10% of Nominal Volume µl / %)± 0.024 µl / 12%Precision (10% of Nominal Volume µl / %)± 0.012 µl / 6%

Accuris AccuCheck Pipette Calibration System (W3002A-120 Balance with W3110 Anti Evaporation Trap) T (more)he Benchmark Scientific W3002A120ACS Accuris AccuCheck Pipette Calibratlon System combines the W3002-120A touch screen analytical balance with an anti evaporation trap accessory and built-in pipette calibration software. Together, this standalone pipette calibration system is easy for any lab tech to use for the ISO 8655 method of pipette calibration for variable volume pipettes from 10µL to 10ml. The W3002-120A has a large, high resolution touch screen that presents the user with an icon based menu system to allow quick and intuitive access to a wide range of useful functions. A precisely engineered Electromagnetic Force Restoration (EFR) weigh cell accurately determines masses to sub milligram levels. The user interface of the AccuCheck™ software is intuitive and requires no special training to use. Individual pipette details (brand, model, serial number) can be saved in the internal data base for current and future calibrations. The software walks the user through all steps of the gravimetric method, allows input of water temperature, air temperature, pressure, and humidity. It saves the weight values, and then automatically performs all calculations for accuracy and precision at minimum, middle and maximum volume settings. The internal calibration system helps ensure that the balance is always calibrated and ready for use. Auto calibration can also be set to occur at specific time intervals depending on user preference. A high resolution thermal probe is incorporated in the core of the EFR weigh cell, and if measured temperature fluctuates slightly, the balance will automatically compensate. Offering a maximum capacity of 120g, readability of 62g x 0.01mg / 120g x 0.1mg, and automatic internal calibration, the W3002-120A balance is a favorite for labs needing fast and accurate weight determinations. The Anti Evaporation Trap greatly improves results when performing the gravimetric method by preventing unstable measurements due to evaporation loss. Removing the Anti Evaporation Trap also allows the W3002-120A balance to be used for general weighing applications. A USB port on the side accepts a flash drive for the storage of weighing data, which can then be transfered to a computer. W3002-120A has adjustable feet and a leveling bubble to ensure correct installation. (Note: For optimal weighing performance, the W3002-120A semi micro model must be installed on a suitably stable surface such as a marble slab table.) Academic, research and industrial labs require accurately calibrated pipettes to achieve meaningful results, and all mechanical pipettes require calibration on a regular basis. The W3002A-120ACS gives any lab the freedom to calibrate pipettes quickly and when required.INCLUDED: The Accuris AccuCheck Pipette Calibration System (W3002A-120 Balance with W3110 Anti Evaporation Trap) includes: - W3002A-120A Analytical Balance with built in Calibration Software - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris NextPette Pipette Set (200, 1000 ul & 5, 10 ml Pipettes) The Accuris NextPette Pipette S (more)et includes variable volume 200 ul, 1000 ul, 5 ml, and 10ml pipettes with carousel stand.INCLUDED: The Accuris NextPette Pipette Set (200, 1000 ul & 5, 10 ml Pipettes) includes: - NextPette 20 to 200ul Pipette - NextPette 100 to 1000ul Pipette - NextPette .5 to 5ml Pipette - NextPette 1 to 10ml Pipette - Carousel Stand - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Dimensions (WxDxH): 600 x 490 x 600 mm

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Max Pressure inlet - 0.7/10Max Pressure Working - 5.5/80 Comes with : 2 X ELGA Labpure S1 - Part No. LC1822 X ELGA Sanitisation Block - Part No. LA6981 X UV Filter1 X ELGA Ultrafiltration Cartridge - Part No. LC151

Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, (more) 115V Refrigerant R134A Operating Temperature Range Ambient +10-50°C Temperature Accuracy ±0.3°C Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention - Interior light for better sample visibility - Optional slide shaker table available to put in and take out samples easily Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Programmable. High accuracy temperature control and temperature distribution. Inner glass door keeps temperature stable during sample observation. Operating temperature range: -10~ + 50° CINCLUDED: The Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Precision suction, error-free measurements The product is supplied with two internal pumps and two b (more)uilt-in buttons used to operate separate pumps. Backlit buttons inform you about operation of a specific pump. The set has two tips for sucking water out of a single beaker (one-channel tip) or four pipettes at a time (four-channel tip). Water is carried from both channels to the beaker through one tube. The power is provided to the pump through a USB A in the weighing terminal. You can supply power from the phone charger, for instance.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Crest P500D-45 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transducer (more) technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P500D-45 Digital Ultrasonic Cleaner with Power Control combines advanced technology with user-friendly features, making it an essential tool for precision cleaning applications. Featuring ceramically enhanced transducer technology and homogenous sound field distribution, it operates at a frequency of 45 kHz, ensuring thorough cleaning and enhanced sample preparation capabilities. With adjustable cleaning time and bath temperature ranging from 20°C to 80°C, it offers versatility for various cleaning needs. The "D" models include nine-step ultrasonic power adjustment and a Degas function, optimizing cleaning performance. Its deep-drawn stainless steel tank with rounded corners facilitates easy cleaning, while an intrinsically safe heater with dry-run protection ensures safe operation. Ideal for removing flux from PCBs, oils, paints, and other contaminants, the Crest P500D-45 guarantees reliable performance backed by a 2-year manufacturer's warranty. INCLUDED: The Crest P500D-45 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty