Gilson PIPETMAN L Multichannel P8x200L, 20-200 uL Pipette

Gilson Microman E M100E pipette 10-100 µl Variable volume pipette 10-100 µl Not calibrated In its or (more)iginal box

THERMO SCIENTIFIC ClipTip 200 pipette tips Reference: Clip Tip 94410318 Without filter Packaging: 5  (more)x 96 tips / insert (refill tower) Volume (metric): 200 μl Expiration date: 10/2019 Quantity available: 1

MY11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the MYA microbalance. Set content: weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Vessel capacity: 11 ml Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Gilson Microman M10E Pipette, 1-10ulThe ergonomically designed MICROMAN® E positive displacement pip (more)ettes, along with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: - Viscous solutions—difficult to aspirate and stick to pipette tips. - Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. - Cold liquids—delivered in excess amounts. - Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Microman M10E Pipette includes: - Operator's Guide - One Year Manufacturer's Warranty

Gilson CARROUSEL Pipette Stand The Gilson CARROUSEL Pipette Stand protects up to seven valuable sing (more)le channel or multichannel pipettes from benchtop contamination. Further protection is gained because pipettes hang vertically from the rack, preventing liquids from entering and contaminating the pipette shaft. Made from chemically resistant polypropylene and polycarbonate, the CARROUSEL stand’s heavy base provides added stability. The rotating head of the CARROUSEL stand provides quick access to pipettes while keeping your benchtop decluttered. Its space-saving design frees your bench space for more important tasks at hand. INCLUDED: The Gilson CARROUSEL Pipette Stand includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Dynatech Microplate Reader  Model - MR 5000 was removed from a university lab where it was (more) surplus to requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition with some marks from use. There is damage to the printer port.

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm or 600 dots/inch, 24 dots/mm  (more)Dot size (WxL): 203 dpi – 0.125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm, 600 dpi – 0.042 x 0.042 mm Maximum print width: 203 dpi – 104 mm Bar code modulus: 203 dpi – 4.9 mil to 49 mil, 300 dpi – 3.3 mil to 33 mil, 600 dpi – 1.6 mil to 16 mil Programmable constant print speeds: 203 dpi – 61, 76 through 254 mm/s in 25 mm increments, 300 dpi – 61, 76 through 203 mm/s in 25 mm increments, 600 dpi – 38, 51 through 102 mm/s in 25 mm increments Media label length: Minimum – 13 mm, Maximum 203/300 dpi – 991 mm, Maximum 600 dpi- 508 mm Media label width: Minimum – 25.4 mm, Maximum tear/cutter – 114 mm, Maximum peel/rewind – 108 mm Media total thickness (including liner, if any): Minimum – 0.058 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 338 x 278 x 475 mm Weight: 15 kg

This was removed from a university lab where it was surplus to requirements. The system powers up bu (more)t was not tested further for safety reasons, and a laser policy at our site. It is in great cosmetic condition. Driver serial No. 102200510ADRModel Ad-2200 Laser Module serial No. 102200510Central wavelength 593nmOptical output power 50nWFB-593-050-FS-FS-0-1-ST on data plate

Radwag AS60 / 220.R2 PLUS Analytical Balance. Capacity 220 g. Readability 0.01 / 0.1 mg. Linearity ± (more) 0.05 / 0.2 mg. Minimum capacity 1 mg. Diameter of the plate 90 mm. Internal calibration. LCD screen. Interfaces: 2 × RS 232, USB-A, USB-B. Leveling system. Power supply 100 ÷ 240 V AC 50/60 Hz. Radwag AS60 / 220.R2 PLUS Analytical Balance. The AS R2 PLUS series balance is a standard analytical weighing device from the SYNERGY LAB line. The AS R2 PLUS is exceptional due to a range of modern construction solutions and systems that guarantee the reliability, precision and accuracy of measurement, and make daily operation easy. New ergonomic design. The latest AS R2 PLUS analytical balances have a spacious weighing chamber, and the large free space of the open door allows free access to the weighing pan and the use of laboratory vessels of various sizes. The stability of the measuring system is ensured by a better balance base made of aluminum. Thanks to the DUAL-CLICK system, the disassembly and assembly of the weighing chamber is done without the use of tools, and the special construction of the weighing chamber glass guides (without edges) significantly facilitates the cleaning of the device. Innovative construction solutions increase the durability and reliability of the balance in long-term operations. Leveling system The standard series of AS R2 PLUS balances is equipped with a spirit level at the front of the chamber, which significantly facilitates continuous level control. Internal calibration The modernization of the internal calibration system guarantees the accuracy of the indications in extremely adverse conditions.

F1 Mass Standard - knob weights with adjustment chamber. Nominal value - 1 kg.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.