Gilson PIPETMAN Classic P5000 Pipette

Gilson PIPETMAN M Multichannel P12x10M BT Connected Pipette PIPETMAN M Connected is a Bluetooth enab (more)led electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, the PIPETMAN M Connected Pipettes help reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected, making planning and executing pipetting protocols faster, easier, and more reliable. The PIPETMAN M Connected Pipettes are available in 20 models covering a volume range from 0.5 µL to 10mL in single channel configurations, and 0.5 µL to 1200 µL in multichannel configurations. Accurate and Precise PipettingThe motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, the PIPETMAN M BT Connected Series reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette.Increased FunctionalityThe intuitive interface has five pipetting modes for a larger number of applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from the PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions.Simple and Comfortable to UseAspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M Multichannel P12x10M BT Connected Pipette includes: - 5V Power Supply with AC Adapter and Cable - Four Battery & Ejector Tags - Manufacturer's Documentation - Operator's Guide - 2 Year Manufacturer's Warranty

Gilson PIPETMAN G Starter Kit, 4 Pipette Kit, P2G, P20G, P200G, P1000GThe PIPETMAN G 4-Pipette Kit p (more)rovides four pipettes covering volume transfers from 0.2 ul to 1000 ul, which will tackle most laboratory needs. With a redesigned piston assembly, the PIPETMAN G pipettes feature extremely low pipetting forces, improving comfort and minimizing injury, all while maintaining the durability, accuracy, and reliability of the original PIPETMAN series. Premium Pipetting ComfortWith a new seal and lighter springs, the new piston assembly of the PIPETMAN G pipettes significantly reduces the force needed to aspirate and dispense liquids. This benefit is especially helpful during extended pipetting sessions and alleviates common hand stresses caused by repetitive actions.FlexiblePIPETMAN G pipettes come with a durable stainless steel tip ejector, which is ideal for most situations. Plastic tip ejectors are available separately and are recommended for working with corrosive substances. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Starter Kit, 4 Pipette Kit, P2G, P20G, P200G, P1000G includes: - Four PIPETMAN G Pipettes: P2G, P20G, P200G, and P1000G - Three Racks of PIPETMAN DIAMOND Tips (Models: D10L, D200 and D1000) - Four SINGLE Pipette Holders - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The AP-12.1.5Y is the first automatic device designed to calibrate single- and multi-channel micropi (more)pettes with [d] 1 µg, in accordance with ISO 8655 requirements. Pipette calibration can be performed in the volume range from 0.5 μl a maximum of 12 channels of fixed and variable volume pipettes. The impressive calibration readability is the result of the co-called separation chamber which stabilizes the measurement path and protects it from excessive air movement. This is a guarantee of high precision measurements. AP-12.1.5Y guarantees the comfort of work. The ergonomic design of the device makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. Other factors that affect the ergonomics of work: compact, mobile design clear, intuitive multilingual menu data security transfer of results directly to the customer’s computer application internal procedure report automatic periodic adjustment of the device. After emptying a 12-channel pipette, the AP-12.1.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.1.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.1.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). When purchasing the AP-12.1.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, a pump equipped with two nozzles: to draw water from one container or from four containers at once, a brush, a pincette, a vessel for the liquid, the Calibration Certificate for the balance.

Micropipettes GILSON P200 (20-200 μl). Sand supply CALIBRATED, sterilized and free of RNAsas.

Single-channel electronic pipette 735061 SARTORIUS Picus 10 to 300 µl New material in its original p (more)ackaging Number of channels: 1 SARTORIUS reference: 735061 Capacity: 10-300 µl Increments: 0.20 µl Optifit tips: 350 µl Maximum volume precision: 0.15 (≤ CV%) Maximum volume precision: 0.4 (± R%) Dimensions (WxDxH): 335 x 150 x 130 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Olympus BX-61TRF Microscope System This system was removed from a university lab where it was surplu (more)s to requirements. All components are in good used cosmetic condition and power on. This system has been professionally serviced, the full service report is available on request. The system consists of the following components: - Microscope Base: Olympus BX-61TRF - Olympus U-CMAD3 Camera Adapter - Olympus U-TV1X2 Camera Adapter - Olympus U-TR30-2 Trinocular Head - Lumen Dynamics 810-00032X X-Cite Adapter - Olympus U-SVRB-4 Manual Stage - Olympus U-HLDT-4 Slide Holder - Olympus U-UCD8A Condenser - Olympus U-LH100L-3 Lamp - Controllers and Power Supply: - Olympus BX-UCB PSU/Controller - Olympus U-HSTR2 Handset Controller - X-Cite 120Q with EXFO Lightpipe - 2 x Control Cables Objectives Included: - Olympus UPlan FL N 10x/0.30 ∞/-/FN26.5 - Olympus UPlan FL N 20x/0.50 ∞/0.17/FN26.5 - Olympus UPlan FL N 40x/0.60 ∞/C-2/FN22 - Olympus UPlan APo 40x/1.00 Oil Iris ∞/- - Olympus UPlan FL N 40x/1.30 Oil ∞/0.17/FN26.5 Eyepieces: - 2 x Olympus WH15X/14

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 600x600 mm.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW