Accuris P7700-S1 NextPette Pipette Set (10, 20, 200, 1000 ul Pipettes)

Manufacturer: Labconco  Model: ScrubAir Description: Compared to traditional siphon washing/rinsing  (more)and oven drying, the ScrubAir uses less water, time and money. It only takes 3 1/4 hours to wash, rinse and dry up to 60 pipettes. The ScrubAir standard wash cycle uses only 12.5 litres of tap water or pure water compared to 600 litres for the siphon method. The three cycle programmes are pre-set at the factory but can be changed by the user and the start time can be delayed by up to 8 hours. The LCD display shows both the cycle segment and the total time remaining. The models have a brushed 304 stainless steel or powder coated steel housing, a pipette holder and a splash guard. Key features: - Automatic, easy to use and less handling of glassware than conventional methods - Fast, thorough cleaning of pipettes inside and out by percolation - Programmable cycle settings and user-defined start delay - Stainless steel housing and pipette holder ensure stability and durability Technical data Water consumption: 1.33 Outer width (in): 15 External height (in): 37.75 Outer depth (in): 18.5 Power supply (VAC): 230 Power supply (Hz): 50/60 Washing temperature (° F): 120 Wash temperature (° C): 49 Inlet connection: 3/8" O.D. Outlet connections: 1.25" Description: Pipette washer, 230V, for 12 to 60 pipettes The device/system offered here has been tested and is fully functional and ready for use.

Gilson MyPIPETMAN Select P2, 0.2-2 uL, Metal Ejector PipetteFeatures - Designed to be ergonomic, saf (more)e, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 0.2 to 2 uL - 3 Year Manufacturer's Warranty

Gilson PIPETMAN G Multichannel P12x300G, 30-300 uL Pipette Designed PIPETMAN G brings a new level of (more) comfort into the Gilson range, with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. Pipetting ComfortPIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting.Reliable ResultsPIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Built-to-Last and ConvenientMade of PVDF and stainless steel, the PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Multichannel P12x300G, 30-300 uL Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA Pette Vario 1 - 10ml Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 1 - 10ml Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 1 - 10ml Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range1 - 10mlIncrements10 µlAccuracy (Nominal Volume µl / %) ± 60 µl / 0.6%Precision (Nominal Volume µl / %)± 15 µl / 0.15%Accuracy (50% of Nominal Volume µl / %)± 40 µl / 0.8%Precision (50% of Nominal Volume µl / %)± 10 µl / 0.2%Accuracy (10% of Nominal Volume µl / %)± 30 µl / 3%Precision (10% of Nominal Volume µl / %)± 6 µl / 0.6%

The AP-12.1.5Y is the first automatic device designed to calibrate single- and multi-channel micropi (more)pettes with [d] 1 µg, in accordance with ISO 8655 requirements. Pipette calibration can be performed in the volume range from 0.5 μl a maximum of 12 channels of fixed and variable volume pipettes. The impressive calibration readability is the result of the co-called separation chamber which stabilizes the measurement path and protects it from excessive air movement. This is a guarantee of high precision measurements. AP-12.1.5Y guarantees the comfort of work. The ergonomic design of the device makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. Other factors that affect the ergonomics of work: compact, mobile design clear, intuitive multilingual menu data security transfer of results directly to the customer’s computer application internal procedure report automatic periodic adjustment of the device. After emptying a 12-channel pipette, the AP-12.1.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.1.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.1.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). When purchasing the AP-12.1.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, a pump equipped with two nozzles: to draw water from one container or from four containers at once, a brush, a pincette, a vessel for the liquid, the Calibration Certificate for the balance.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark Micro Bead Sterilizer w/ Glass Beads Benchmark’s Micro Bead Sterilizer is ideal for the st (more)erilization of small research tools (forceps, scissors, etc.). When the chamber is filled with the included glass beads, high temperatures (up to 300C) can be used to eliminate the presence of bacteria, spores and other microorganisms. Chamber temperature can be viewed on the large LED control panel and conveniently adjusted with the control knob. The outer casing of the unit stays cool to the touch, even when the sterilizer is used all day. The supplied safety cover can be placed over the opening to conserve energy and reduce the heating/ramping rate. The Micro Bead Sterilizer does not use gas, flame or chemicals and is safe for use in hoods. With adjustable temperature, the application range of the sterilizer can also be exanded into incubations and the decontamination of plastic objects/tools. This product is designed for RESEARCH USE ONLY. Not intended for clinical use. INCLUDED: The Benchmark Micro Bead Sterilizer w/ Glass Beads includes: - Glass Beads, 150g - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V Temperature Range Ambient +5°C to 500°C Spe (more)ed Range 50 rpm to 1,800 rpm Capacity 22 L Features - Heats and stirs up to 22 L for versatile lab applications - Temperature range up to 500°C with consistent heat control - 10 x 10 inch ceramic plate for even heat and stirring support - Speed range from 50 to 1,800 rpm for adaptable mixing - Digital display with high-contrast LCD for easy monitoring - Compatible with Ethernet, USB, and RS232 for data logging - Certified for safety with CE and TUV standards - Includes Pt1000 temperature probe and holder for precision The Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V, is engineered for high-performance heating and stirring, making it ideal for demanding lab environments. Its spacious 10 x 10-inch ceramic plate heats uniformly up to 500°C and can stir volumes up to 22 liters, offering flexibility for a wide range of applications. With a speed range of 50 to 1,800 rpm, this model supports both gentle and vigorous mixing, accommodating various sample needs. This hotplate stirrer features a high-contrast LCD display for clear visibility of settings, while Ethernet, USB, and RS232 connectivity enhance data logging and remote control. Safety-certified by CE and TUV, the Guardian 5000 includes a Pt1000 temperature probe and holder, ensuring precise temperature control. With a programmable timer that operates up to 99 hours and 59 minutes, this model is a reliable and versatile choice for laboratories prioritizing accuracy and adaptability. INCLUDED: The Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V includes: - 30500590 Temperature Probe - 30973298 Temperature Probe Holder - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 15 to 300ul Volume Range 15 t (more)o 300 ul Accuracy 0.6% / 1.8 ul at 300 ul Pipette Type Air Displacement Features - Ergonomic design with adjustable finger rest for comfortable, fatigue-free pipetting - Multiple operating modes: standard pipetting, reverse pipetting, mixing, gel loading, and dispensing - Intuitive four-button control system with a clear digital display for easy operation - 360° rotating pipetting unit for customizable hand positioning and improved comfort - Easy Calibration technology enables quick, tool-free adjustment for maintaining accuracy - Autoclavable pipette shaft for convenient sterilization and contamination prevention - Effortless tip mounting and ejection with minimal force required due to O-ring design - Long-lasting NiMH battery supports over 4,000 pipetting cycles per charge - Continuous use during charging with a 1-meter charging cable - Battery Refresh function extends battery life and optimizes performance The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 15 to 300ul combines ergonomic design with cutting-edge functionality to streamline liquid handling tasks in multi-well plate formats. With an adjustable volume range of 15 to 300ul and 12 channels, it offers flexibility and precision for a variety of applications. Partial volume options of 300ul, 150ul, and 30ul provide added versatility for routine and specialized workflows. This pipette is designed for ease of use, featuring a lightweight construction and a 360-degree rotatable pipetting unit for individualized comfort. Its intuitive interface simplifies navigation, while the integrated Easy Calibration technology allows quick, tool-free adjustments to ensure consistent performance. Built for durability and precision, the BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 15 to 300ul is an essential tool for efficient and accurate pipetting in any laboratory setting.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 15 to 300ul includes: - 1 x TipBox - 1 x TipRack Refill Pack - Device Stand - Rechargeable Battery - Power Adapter - Reagent Reservoir - Assembly Aid - Grease - 1 Set of Sealing Rings - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 5702 Centrifuge with A-4-38 Rotor The Eppendorf 5702 centrifuge has a maximum speed of 4,4 (more)00 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702 has a maximum capacity of 4 x 85ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. With a relatively small footprint, the Eppendorf 5702 benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702 has a total weight of only 44 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702 can be used in a range of settings, from clinical to cell culture labs.INCLUDED: The Eppendorf 5702 Centrifuge w/ A-4-38 Rotor includes: - A-4-38 Swing Bucket Rotor w/ Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Power Cord - Operator's Guide - Full 6 Month Parts and Labor Warranty Eppendorf 5702 Centrifuge with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 85 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesWeight44 lbs