STZ 28 FALC Laboratory Mini Oven

Suitable for laboratories that need to sterilize small tools, this small stove has excellent thermal (more) stability, with natural ventilation.     Inner chamber in aluminum for better heat diffusion.     Front panel with bimetallic thermoregulator with fluid expansion probe, mechanical timer from 0-120 minutes + infinite.     Equipped with 2 shelves with the possibility of inserting up to 5     Protection class IP40

This Solartron Mobrey 1286 Electrochemical Interface was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has marks from age and use.

264 x Laboratory Trousers & Tunics - Pool Undersuits All items are brand new in their original p (more)ackaging. Lab Trousers Sizes are as follows: 4 - 556 - 778 - 8810 - 2211 - 22 Lab Tunic Sizes are as follows: 100 - 55108 - 77116 - 88124 - 22140 - 22

Grant C2G immersion Cooler This was removed from a university lab where it was surplus to requiremen (more)ts. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition.

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta Select-Horn electronic muffle furnace has an interior enclosure made up of high-quality refractory plates and evenly distributed heating elements with special long-lasting high-melting point wire. Excellent thermal insulation and reduced consumption. Quick temperature recovery when opening and closing the hinged door.

This listing is for a Memmert Double Door Incubator. The unit is in full working condition and is r (more)eady for immidate realese. The Memmert Double Door Incubator is a cutting-edge, high-precision incubator designed to meet the rigorous demands of microbiological laboratories, research facilities, and applications requiring controlled temperature environments. Its innovative double-door design offers optimal visibility and easy access while maintaining consistent internal conditions, preventing contamination and ensuring precise, reliable results. Key Features: Double Door Design: Fully insulated stainless steel doors ensure superior temperature control and easy access without heat loss or contamination risks. Advanced Temperature Control: Available with energy-efficient Peltier Technology or compressor-cooling systems for precise, uniform temperature regulation. Wide Temperature Range: Adjustable from 0°C to +70°C (or +80°C for select models), ideal for a variety of sensitive research and incubation applications. Optimum Temperature Distribution: Rapid energy transfer ensures uniform heat distribution and prevents condensation and sample drying. Quiet, Low-Vibration Operation: Designed for noise-sensitive environments, maintaining quiet and stable performance. User-Friendly Interface: Features Memmert’s intuitive ControlCOCKPIT with optional AtmoCONTROL software for easy programming, control, and monitoring. Benefits: The Memmert Double Door Incubator provides exceptional temperature accuracy, making it ideal for microbiology, cell culture, and other temperature-sensitive processes. This listing is for a. The unit is in full working condition and is ready for immidate realese.The double-door construction allows for easy sample observation and access, while the insulated design ensures minimal temperature deviations. With advanced ventilation technology, energy efficiency, and quiet operation, this incubator enhances productivity and ensures the protection of sensitive samples. Its compatibility with logging and control software offers advanced data tracking and optimization for long-term experiments. Technical Specifications: Temperature Range: 0°C to +70°C (up to +80°C for some models) Construction: Stainless steel, fully insulated Controller: ControlCOCKPIT with optional AtmoCONTROL integration Operation: Energy-efficient Peltier or compressor-cooling systems Defrost Function: Available in select models Quiet Operation: Low-vibration performance Choose the Memmert Double Door Incubator for unmatched precision, energy efficiency, and ease of use, making it the ideal incubator for advanced laboratory applications.

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab This system was removed from a university whe (more)re it was surplus to requirement. It is in very good cosmetic condition and powers on. The previous owner has notified us that this system is in full working order. This system includes the following: - Pharmacia LKB VacuGene Pump - ProXPRESS 2D User's Guide - ProXpress Test Sheets - 2950-2017 Gell Cassette Assy - 2950-2019 UV Gel Adaptor (Sealed) - 2950-2048 Calibration Sample Assy - PX2950-2006 - 2950-2049 Standard Wet Gel Cassette Assy - Phoretix Software - Proteome 1D Analyser Software and manual

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.

Labconco 750ml Complete Flask, Catalog # 7541100Complete Flask consists of 7542700 Flask Bottom, 754 (more)4400 Flask Top and a supply of filter paper. Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. They are available in clear or amber colored glass. A complete Fast-Freeze Flask consists of a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately as replacement components. Adapters are available in borosilicate glass or stainless steel. Fast-Freeze Flasks and Adapters are compatible with any brand freeze dryer that has 1/2" or 3/4" diameter valve ports. Glass flasks withstand maximum temperature of 490º C. Flask toppers withstand a maximum temperature of 450º C. INCLUDED: The Labconco 750ml Complete Flask, Catalog # 7541100 includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty