Lab Oven STF-N 120T FALC

This Hybaid Shake n Stack Hybridisation Oven was removed from a university lab where it was surplus  (more)to requirements. The item powers on and is in a reasonable, used cosmetic condition. The rotation works to the dial speed setting. The temperature was tested with a digital thermometer (not included). The temperature was first set to 37˚c, when reached, the thermometer read 42.5˚cThe temperature was then set to max temp 85˚c, when reached, the thermometer read 87.9˚c Internal dimensions - D23.5 W35 H24.5cm

BINDER BD-115 incubator / oven with forced convection 100 ° C Model: BD115 ventilated Capacity: 115  (more)liters Temperature range: Room temperature plus 5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Year of manufacture: 2010 Tested at 37 ° C

Maximum temperature: 200°C Capacity: 25 L Equipped with temperature controller, analog vacuum gauge  (more)and overtemperature protection. Including 2 inserts (removable), maximum 4 possible Internal dimensions (WxHxD): 300 x 275 x 307 mm Usable plate size (WxD): 270 x 250 mm Weight: 58 kg

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF55plus Forced Circulation Oven 53L, 115V Working Temperature Range Min. 10°C above ambien (more)t up to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 53 L (1.87 cu. ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF55plus Forced Circulation Oven 53L, 115V is designed to cater to diverse laboratory needs with its advanced temperature control capabilities and substantial internal capacity. It operates within a setting temperature range of +20 to +300°C and boasts a working temperature range that begins just 10°C above ambient, ensuring optimal conditions for a variety of thermal processes. Enhanced with TwinDISPLAY, this model features an adaptive multifunctional digital PID-microprocessor controller complemented by two high-definition TFT-color displays for precise monitoring and adjustments. Safety and efficiency are paramount in the design of the UF55plus. It includes a comprehensive set of safety features such as an overtemperature monitor TWW, an adjustable temperature limiter TWB, and a mechanical temperature limiter TB to prevent overheating. The oven's AutoSAFETY system offers an integrated over- and undertemperature monitor "ASF," which closely follows set parameters and provides timely alarms to safeguard against temperature deviations. Coupled with a robust stainless steel interior that facilitates easy cleaning and uniform heat distribution, the UF55plus is an exemplary choice for professionals seeking a reliable and highly functional heating solution in their laboratories. INCLUDED: TheMemmert UF55plus Forced Circulation Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN75PA Natural Convection Paraffin Oven 74L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 74 L (2.6 cu. ft.) Features - Internal volume of 74 L (2.6 cu. ft.) for versatile storage and heating applications - Temperature range from +20°C to +80°C with 0.1°C accuracy for precision heating - Equipped with dual Pt100 sensors in a 4-wire circuit for reliable temperature monitoring - TwinDISPLAY control panel with high-definition screens and PID microprocessor technology - AtmoCONTROL software for easy programming and data management via USB or Ethernet - AutoSAFETY with integrated over- and undertemperature monitoring and audible alarms - Durable stainless steel interior, reinforced with ribbing and protected large-area heating - Designed with natural convection for uniform heat distribution throughout the chamber The Memmert UN75PA Natural Convection Paraffin Oven 74L, 115V is engineered to provide precise and uniform heating, making it ideal for applications requiring controlled temperature environments. With a spacious 74-liter (2.6 cu. ft.) capacity, it offers a setting temperature range of +20°C to +80°C, maintaining accuracy within 0.1°C, thanks to its dual Pt100 sensors in a 4-wire circuit. The oven’s TwinDISPLAY control panel features high-definition TFT color displays and a digital PID microprocessor for optimal temperature consistency, while natural convection ensures uniform heat distribution without additional airflow disturbances. Enhanced safety features make this paraffin oven reliable for intensive laboratory settings. The AutoSAFETY function includes integrated over- and undertemperature monitors that follow a preset tolerance range, with audible and visual alarms to alert users of temperature deviations. With AtmoCONTROL software for easy programming and data transfer via USB or Ethernet, the oven allows customizable temperature, program time, and time zone settings. Built with a fully insulated stainless steel door, two-point locking system, and a reinforced, easy-to-clean stainless steel interior, the UN75PA is designed for durability and ease of use. INCLUDED: TheMemmert UN75PA Natural Convection Paraffin Oven 74L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Fiberlite F18-8x50cy Fixed Angle Rotor THERMO SCIENTIFIC New equipment in its original packaging The (more)rmo reference: 75003663 Capacity: 8 x 50ml Max Speed : 14,500 rpm RCF Max: 24,446 ×g Compatible with models: Thermo Scientific Sorvall Legend XT/XF, Sorvall Legend X1, Multifuge X3/X3F, Multifuge X1 and SL 40F Centrifuges

Temperature range: 2°C to 20°C Content: 104 L Dimensions (WxDxH): 595 x 640 x 1001 mm Weight: 43 kg  (more)Explosion proof

Bruker Vector 22 FTIR Spectrometer This system was removed from a university laboratory where it was (more) surplus to requirements. The unit powers on and is in good condition with minimal wear. However, the software and PC are not included, therefore, no further testing has been conducted. Specifications:- Type: I 19300 - Serial No.: V221670 Included Manuals:- Bruker Opus NT Opus/IR Getting Started, Version 3 - Bruker Opus NT Opus/IR Reference Manual, Version 3 - Bruker Opus NT Opus/IR Programming, Version 3

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interface RS232. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Motic Panthera TEC POL (Trinocular) Features - UC Plan Achromat objectives (strain-free) for FOV 22m (more)m - Transmitted and transmitted/ incident stand options - Transmitted light: LED/HAL light source interchangeable - Integrated focusable/ centerable Bertrand lens - Motic LightTracer: Coded nosepiece & Digital light intensity knob The Panthera TEC POL series fills a last gap in the Panthera family: Polarization microscopes for all material sciences, ready to handle transparent samples like fibers and foils with their inherent birefringence. The Incident light models for opaque materials work out the specific reflectivity (bireflection) of flat surfaces. To extend the application fields, all microscopes carry an intermediate tube with Bertrand lens to analyze the crystal structure and interference figures of gems, precious stones and minerals.INCLUDED: The Motic Panthera TEC POL (Trinocular) includes: - 4X/0.1 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 60X/0.8/S (WD 0.35mm) Objective - Widefield UC-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue Filter - Halogen Bulb - Adjustable Key for Nosepiece - Interference Color Chart - Screws for Metal Extension Support - Operator's Guide Motic Panthera TEC POL (Trinocular) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf typeSensor type-Sensor size-Capture resolution-Live display mode (through Wi-Fi)-Live display mode (through ethernet)-Live display mode (through HDMI)-Inclination25º inclinedTrinocular light splitFixed 50:50Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 4 diopterEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentNosepieceReversed quintuple, coded with single centering holesIntermediate BodyRotatable analyzer 360º, Bertrand lens and slot for compensatorsObjective classificationCCIS® UC Plan Achromatic (strain-free), DINObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)Objective mounting threadW 4/5"x1/36" (RMS standard)StageCircular rotating 360º, lockableStage sizeØ160mmTravel range X&Y1º increments, 0.1º vernier scaleCondenserFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polarizerDiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2µmFocusing stroke25mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityHalogen/LED and LED color temperature interchangeabilityIllumination featuresMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorTransformerInternalPower supply110-240V (CE)Other featuresUSB 2.0 for external camera powerDimensions LxWxH410x300x395mmNet weight9.8kgComparison of ModelsSpecificationPanthera TEC POL (Binocular)Panthera TEC POL (Digital)Panthera TEC POL (Trinocular)Optical systemCCISCCISCCISObservation tubeBinocular head, Siedentopf typeBinocular head, Siedentopf type with built-in digital cameraTrinocular head, Siedentopf typeEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)StageCircular rotating 360º, lockableCircular rotating 360º, lockableCircular rotating 360º, lockableStage sizeØ160mmØ160mmØ160mmTravel range X&Y1º increments, 0.1º vernier scale1º increments, 0.1º vernier scale1º increments, 0.1º vernier scaleFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity control.comparison-table tr td:nth-child(4) { background-color: #fffacd; }DownloadsTechnical Specification Download

Labconco 600, 750, 900, 1200 & 2000 ml Fast-Freeze Flask TopFlexible, non-contaminating silicone (more)rubber top fits on Fast-Freeze 600, 750, 900, 1200 and 2000 ml bottoms.Fast-Freeze Flasks attach withadapters to valve ports on Labconco Drying Chambers and Manifolds. A completeFast-Freeze Flask consists a rubber top, glass bottom and a supply of filterpaper. Tops, bottoms and filter paper are available separately as replacementcomponents. Adapters are available in borosilicate glass or stainless steel.Fast-Freeze Flasks and Adapters are compatible with any brand freeze dryer thathas 1/2" or 3/4" diameter valve ports.Glass flasks withstand max temperatureof 490º C. Flask toppers withstand a max temperature of 450º C. INCLUDED: The Labconco 600, 750, 900, 1200 & 2000 ml Fast-Freeze Flask Top includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty