Lab Oven Smart SLW 15 POL-EKO

Huber K6 Re-Circulating Chiller With Pilot One Thermostat This item was removed from a university la (more)boratory where it was surplus to requirements. It powers on and is in good cosmetic condition.The unit has been temperature tested (thermometer not included). We have not tested at higher thank 100C as we do not have the oils for testing, but it is in full working order. Specifications:- - Min settable temp -30ºc - Max settable temp 200ºc - Model- K6 - S/N- 187534/13

This item has just arrived in our stock. Please enquire for further details.

Temperature range: -16°C/-18°C/-20°C/-22°C/-26°C Dimensions (WxDxH): 59 x 58 x 1850 mm

CryoBox Freezer Rack THERMO SCIENTIFIC 5038-4322 Brand new in original packaging For standard cryoge (more)nic boxes with ease with these durable stainless steel and aluminum freezer racks, which fit most standard chest freezers and upright freezers Part number: 5038-4322 For 12 standard Cryoboxes 12-place rack (4X3) Type: horizontal Dimensions: 22.5 x 44.4 x 14.3 cm (lxWxH)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BINDER KB-53 refrigerated incubator / drying oven with forced convection 100°C Model: KB53 refrigera (more)ted and ventilated Capacity: 53 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 40 x 40 x 33 cm Overall dimensions: 64 x 84 x 58 cm Weight: 72 kg Year of manufacture: 2015 Tested at 37 ° C and -10 ° C

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System This system was removed from a university lab w (more)here it was surplus to requirements. The Rigaku X-Stream 2000 main unit did not power on when tested with a 3 Phase test plug. It is in good cosmetic condition with minimal wear. The cryogenic crystal cooler powers on and is in good condition with minimal wear. It has passed a PAT test, but no further testing was performed. Due to the main unit not powering on, this system is listed as Spares/Repair. Specifications:- Main Unit - Model: CP830 - Serial No.: 1831322-240105A - Cryogenic Crystal Cooler - Model: XS-2000 - Serial No.: 800150

This INTEK LH200 Fraction Collector was removed from a university lab where it was surplus to requir (more)ements. The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

This listing is for 1 of 2 IKA MS 3 Basic Orbital Shaker. The unit is in full working condition and (more) is ready for immediate release. The IKA MS 3 Basic Orbital Shaker is an efficient and versatile laboratory device designed for a variety of shaking tasks involving small vessels and microtiter plates. Its compact design and robust features make it suitable for both routine laboratory applications and more specialized experiments. Key Features: Orbital Movement: The shaker operates with an orbital motion, characterized by a shaker diameter of 4.5 mm. This design allows for effective mixing of samples within a range of vessel types. Two Operating Modes: Mode A (Safe Mode): In this mode, the shaker detects the type of attachment being used and restricts the speed to a maximum of 1,300 rpm for non-standard attachments, ensuring safety and preventing damage to both samples and the device. Mode B: This mode does not feature attachment detection and allows for higher speeds up to 3,000 rpm, depending on the attachment and application requirements. Touch Operation: The standard attachment enables up to 3,000 rpm in touch mode, providing immediate mixing responses when needed. Stable Shaking: The shaker maintains stable operation across all speed settings, ensuring uniform mixing of solutions and samples without fluctuations that could impact experimental results. Durable Construction: Built with a robust zinc die-cast casing, the MS 3 B promises longevity and reliability in various laboratory environments. Permissible Shaking Weight: The machine can accommodate a maximum shaking weight (including attachments) of 0.5 kg, making it versatile for different laboratory setups. Key Specifications: Type of Movement: Orbital Shaker Diameter: 4.5 mm Permissible Shaking Weight (including attachments): 0.5 kg Operating Modes: Mode A: Safe mode with attachment detection Mode B: Without attachment detection Speed Range: 0 - 3,000 rpm (Limited to 1,300 rpm in Mode A with non-standard attachments)

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.