Zeiss Mikroskop Standard 14 Microscope 16x 40x 100x W10x/18

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Carl Zeiss Jena Microscope w/ 4 x Objectives Jena 3.2 10 40 100 A - Lab This item was removed from a (more) university lab where it was surplus to requirement. It is in good cosmetic condition and in good working order. Eyepieces; - 2 x Carl Zeiss Jena P10x Objectives; - 1 x Carl Zeiss Jena 10/0.25 160/-A Objective - 1 x Carl Zeiss Jena 3.2/0.10 160/- Objective - 1 x Carl Zeiss Jena HI 100/1.25 160/0.17-A Objective - 1 x Carl Zeiss Jena 40/0.65 160/0.17 Objective

Zeiss AXIO Observer Z1 w/ CO2/02/Temp Module S1, Axiocam, MCU 28 Lab This microscope system was remo (more)ved from a university where it was surplus to requirement. All units included are in good cosmetic condition, the previous user has stated that this system was in working order prior to removal. We were able to test the following, which are in working order: - Zeiss Pecon CO2 Module S1 - Zeiss Pecon O2 Module S1 - Zeiss Pecon TempModule S1 - Zeiss Pecon Heating Unit XL S - Zeiss MCU 28 w/ Controller - Zeiss AIM-System - Zeiss Axio Observer LCD TFT touchscreen Control Panel Unable to test the following, due to the reasons stated alongside: - Zeiss HBO 100 Fluorescence Microscope Lamp 423010 - Unable to power on due to Class 4 Laser warning label. - Zeiss Axiocam HRm - Power supply cable not included. The microscope is fitted with: - 2 x Zeiss 1016-758 W-Pl 10x/23 Microscope Eyepiece There are no objectives included. This microscope system features all the parts listed above, we are unable to test this system further at our facility due to restrictions on operating lasers on our site.

Carl Zeiss Axioskop 20 EL-Einsatz 451487 Binocular Transmitted Light Microscope Zeiss Eyepiece PL 10 (more)x/20 (PN 444031 & 444032 ) Zeiss Mechanical XY Stage Specimen Table (PN 453522 ) Zeiss Condenser 0.9 (PN 451754 ) Objectives : Zeiss Achroplan 20x/0.45 Ph2 (PN 440041 ) Zeiss Achroplan 100x/1.25 Oil Ph3 (PN 440081 )

Head: Double Binocular Eyepiece: Zeiss Kpl 10x/18 Objectives: 2.5x/0.08, 10x/0.22, 40x/0.65, 100x/1. (more)25 Oil Final magnifications: 25x, 100x, 400x, 1000x Nosepiece: Quadruple Focusing: Coaxial coarse and fine control knobs Illuminator: 12V Halogen illuminator

Showa Optronics Co Laser System With Olympus FV10-COMB This system was removed from a university lab (more) where it was surplus to requirements. The system powers up but has not been tested further for safety reasons. Included are the following; Olympus FV10-COMB Showa Optronics Co GLS3135 LaserShowa Optronics Co GLS3135 PSU Showa Optronics Co GLG7000Melles Griot 05-LHP-991

Medical refrigerator, with glass door, produced by B Medical Systems - Integrated B Medical Systems  (more)multifunction electronics - High quality stainless steel, certified antibacterial, for better longevity and easy hygiene control - High internal volumetric utility, very versatile, thanks to the multiple intuitive guides that allow modularity - Internal modules and tracks fully compatible with other ML / MP models Specific features of the ML 1430 SG model Preset temperature: +5°C Adjustable temperature in 0.1°C increments: +4°C to +15°C Cold / hot temperature alarm limit: +2°C / +8°C Resistance over time (from +5°C to +10°C): 85 min. Climate class (ambient temperature range): SN / ST (+10°C to +32°C) Defrost: Natural Type of refrigerant: R290 Heat emission (Kcal / h): 48 Compressor running time (%): 20

This item has just arrived in our stock. Please enquire for further details.

F1 Mass Standard - knob weights with adjustment chamber - set (1 g - 50 g), wooden box Number of pie (more)ces in the set: 8 Weights 1 g i 2 g – solid masses without adjusting chamber

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes Speed Range (more) 200 to 18,000 RPM (4,500 RPM with included rotor) Maximum Capacity 4 x 200ml Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes is a high-performance centrifuge capable of speeds ranging from 200 to 18,000 RPM (4,500 RPM with the included rotor), with a maximum RCF of 23,542 x g (3,350 x g with the included rotor). With a maximum capacity of 4 x 200ml, this centrifuge is ideal for a variety of applications in the life sciences, including tissue culture and molecular biology. Its timer allows for up to 99 hours and 59 minutes of operation, with the option for continuous use. The Hermle Z327 also has the ability to store up to 99 programs, making it highly customizable for specific experimental protocols. Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes includes: - Z327 Centrifuge - Z327-200 4 x 200ml Swing Out Rotor and 4 x Z327-200-BUK Buckets - 2 x Z327-200-A57 8 x 1.8-7ml Blood Tube Inserts for Z327-200-BUK - 2 x Z327-200-A10 7 x 10/15ml Round Inserts for Z327-200-BUK - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Heidolph 036130000 Test Tube Shaker with Vibrating Reax Top Speed Range 100 – 2,500 rpm; 200 – 3,20 (more)0 rpm Orbit 5 mm Motion Circular Vibrating Features - Ideal for simple mixing tasks, enhancing lab efficiency - Short-term operation mode activated by pressure on the test tube tray - Continuous operation dissolves persistent cell pellets gently yet powerfully - Achieves speeds up to 3,200 rpm for thorough mixing - 5 mm shaking orbit ensures uniform distribution and homogenization of viscous media - Equipped with overheat protection to ensure safety - Provides IP 22 protection against the ingress of solids and liquids - Simple scale with reference points for precise speed control This model is particularly suitable for simple mixing tasks. In short-term operation mode, the shaking motion is triggered by pressure on the test tube tray. This mode is suitable for mixing up solutions, for example. Persistent cell pellets can be dissolved gently but powerfully in continuous operation. With a speed of up to 3,200 rpm and a shaking orbit of 5 mm, reliable and uniform distribution of solids, and homogenization of highly viscous media are guaranteed. Click Here to View Product Video INCLUDED: The Heidolph 036130000 Test Tube Shaker with Vibrating Reax Top includes: - Heidolph 036130000 Test Tube Shaker with Vibrating Reax Top - Power Cord - Operator's Manual - Manufacturer Documentation - 3 Year Manufacturer's Warranty