Thermo Scientific Finntip 50 Sterile 10x3984 Pcs 9400373

Prior PX042 Compound Microscope With 4 x Objectives Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

Christie Digital 1.9-3.8:1 Zoom Long Lens This was removed from a university lab where it was surplu (more)s to requirements. The unit is in good cosmetic condition but has not been tested.

Motic AE21 Series Trinocular Inverted Microscope with 4x Objectives This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in very good, used cosmetic condition. The microscope has been tested with one of our slides and is working well and is clear. On the microscope are the following modules; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 4 x Objectives: 1x Motic E Plan LWD PH 40x/0.60 ∞/1.1 WD 2.11x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Applikon Biotechnology EZ-Control Bioreactor System was removed from a university lab where it  (more)was surplus to requirements. Included are; Applikon Biotechnology EZ-Control Bioreactor SystemCat no. Z310110010SN - P18662/99The unit powers on and boots up, but was not tested further.Unit dimensions - L41 W37 H72cm Parts:-GXA Gas AnalyserModel - GXA-030SN - 076Powers on with 12vdc power supply (not included) Pump can be heard running. Applikon Type P140Cat no. Z510000020SN - P18343/14 Applikon Water Console Applikon 7L Glas Biorector Vessel with Heat jacket Trolley Dimensions - L80 W61 H100cmBottom Shelf - 75 x 61cm Consumables/Accessories:-Box of 7 x mixed AppliSens Sensor ProbesBox of 1 x AppliSens Sensor ProbeAir/N2/CO2 GaugesBlue TubingApplikon Impeller Marine "V"Various metal partsMetal clampApplikon Slotted Blindstopper M18 X 1.5Bag of 5 Applikon Marine ImpellersApplikon V1RE003911Wika Tube & Connection GaugeVarios probe cablesEthernet cableApplikon encoder cableApplikon Bottle Rack fittingsWika Oxygen GaugeApplikon Gas Outlet Bulkhead Connector Set of 6Bag of Blind Stoppers for D14.3MMCable Sensor Z1000400122 x Applikon Ribbed Blindstopper G3/4"Applikon Ribbed Blindstopper M30X1Applikon Medium Triple inlet M18X1.5 Bent pipesAir Inlet Pipe & Porous Sparger 7LFlat Disc Impeller Z81313R607Mechaheat JacketApplikon Start up kit

Parts for IRIS IQ200 Select 700-3340 Automated Urine Microscopy Analyzer Parts for: Model: IQ200 Sel (more)ect 700-3340 from 2009

Matest YGM15418 / A059-12 vibrotamizer.  Includes lid and eight Ø300mm x 80mm sieves with AISI-304 s (more)tainless steel frame and AISI-316 mesh in accordance with ISO 3310/1 standards of 0.100mm, 0.200mm, 0.300mm, 0.400mm, 0.500mm, 0.600mm and 0.710mm. Capacity for up to 10 8" sieves. Digital control for selection of work mode Triple vibrating action (vertical, lateral and rotational). Timer 0-999 minutes and adjustable vibration intensity. The control panel can be mounted on the wall. The Matest YGM15418 / A059-12 Vibrotamizer is a high-quality equipment designed for the classification of granular materials in the laboratory. With a robust and efficient design, this sieve machine guarantees precise and reliable results in each test performed. Equipped with a powerful motor and a controlled vibration system, it offers optimal performance in separating particles according to their size. Its resistant and durable structure makes it an indispensable tool for research and quality control in various industrial sectors.

Eppendorf 5702R Centrifuge 230V with A-4-38 Rotor Max. Speed 4,400 RPM Max. Capacity 4 x 100ml Max. (more) RCF 3,000 x g Features - Holds up to 4 x 100 ml samples for versatile lab applications - Temperature control range from -9°C to +40°C, suitable for temperature-sensitive samples - Compact design with a 20.7-inch height (lid open) for under-shelf placement - Quiet operation minimizes noise in lab environments - Timer range from 1 to 99 minutes with continuous run option - FastTemp for rapid pre-cooling and continuous cooling when idle - ECO switch-off activates after 8 hours of inactivity to conserve energy - Two program keys allow quick access to frequently used settings - Supports a maximum speed of 4,400 RPM and 3,000 x g (RCF) for efficient sample processing The Eppendorf 5702R centrifuge has a maximum speed of 4,400 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702R has a maximum capacity of 4 x 100ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. Temperatures from -9C to +40C. With a relatively small footprint, the Eppendorf 5702R benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702R has a total weight of only 84 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702R can be used in a range of settings, from clinical to cell culture labs. The Eppendorf 5702R Centrifuge 230V is new in the box INCLUDED: TheEppendorf 5702R Centrifuge 230V w/ A-4-38 Rotor Rotor includes: - A-4-38 Swing Bucket Rotor with Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5702R Centrifuge 230V with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 100 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesTemperature Control-9C to +40C

IKA RV 10 Auto Pro V Flex Rotary Evaporator Features - 4L heating bath optimized for rapid achieveme (more)nt of working temperature, with a temperature safety circuit and boil-dry protection - Integrated vacuum controller and timer function - Bright, high-contrast, TFT, color-graphic control panel with simple menu navigation and programming for up to ten individual procedures - Automatic cooling water management, heating bath management, and ventilation - Right or left flask rotation with push-off mechanism for tightly-fitting flasks - Digital interfaces: USB port and RS-232 interface for remote control Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Precise setting of distillation method per solvent with direct volume and efficiency control Integrated solvent library with 40 preset solvents and the ability to expand to incorporate new processes The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative handling concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply. The new IKA Vacstar digital included in the package is controlled directly from the drive unit of the RV 10 auto via the data cable provided. INCLUDED The IKA RV 10 Auto Pro V Flex Rotary Evaporator includes: - RV10 control - HB digital S099 Heating Bath - IKA VACSTAR digital Vacuum Pump - RV 10.900 Glassware vertical - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Vacuum hose (2 x 0.55 m) - Water discharge hose (1 x 1 m) - Water discharge hose (1 x 1 m) - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Auto Pro V Flex Rotary Evaporator SpecificationsType of coolingVertical condenserCooling surface1500 cm2Speed range5 - 300 rpmReversible direction of rotationyesSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftMotorStroke140 mmHeating temperature rangeroom temp. - 180 °CHeat output1350 WSet temperature resolution1 ±KFilling volume max.4 lVacuum controller integrated yesTimer yesVacuum pumpVacstar digitalDimensions (W x H x D)500 x 430 x 440 mmWeight52.34 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesAnalog outputyesVoltage100 - 240 VFrequency50/60 HzPower input100 WPower input standby3.3 WComparison of ModelsSpecificationRV 10 Auto Pro V FlexRV 10 Auto VRV 10 Digital VRV 3 VRV 8 VType of CoolingVertical CondenserVertical CondenserVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.34 kg34.96 kg32.36 kg28.3 kg25.76 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote

0