Nikon Ti-C Condenser 512486 with Prism NAMC2 NAMC3 NAMC

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Prior Model. PX042 Compound Trinocular Microscope With Four Objectives Lab This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Ultramicrotomo Leica UCT 125. Manufacturing machine knives, table vibration, glass for the manufactu (more)re of blades, and support to make knives. Manual included in attachment. Specifications: - The ultramicrotomo is an instrument commonly used to prepare samples for TEM. Use a glass knife or diamond for cutting ultra-thin sections of specimens included epoxy. - The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width. Were mounted on grids TEM for viewing. - The ultramicrotomo is also used to create a surface mirror-smooth on samples mounted in epoxy, applications for which include images secundariias in the SEM and nanoindexación.

Motic SMZ-171-BLED Stereo Microscope with LED Illumination Stand Magnifaction Range 7.5x - 50x Opti (more)cal System Greenough Illumination 3W LED with Intensity Control Features - Binocular Microscope; 45° inclined - Widefield WF10X/20mm - +/- 5 diopter adjustments on both tubes - Greenough zoom optical system - 0.75X - 4.5X objectives - Zoom ratio: 6:1 - Interpupillary distance: 55-75mm - Pole-type stand with transmitted illumination - Black, white, and frosted stage plates and dust cover included - Coarse focusing system with tension adjustment The SMZ171 model terminates Motic’s SMZ stereo microscope line by using modern ESD resistant materials and optimized LED illuminations for a wide range of biomedical and material science applications. The optical performance with improved transmission rates in higher magnifications is combined with reliable mechanics for daily usage. The SMZ171 is an advanced stereo microscope for biomedical work and industrial quality control.Motic’s SMZ-171 is an advanced stereo microscope for a wide range of biomedical and material science applications. The Greenough system delivers crisp and clear images in a zoom range of 6.7:1. Five click-stops within the smooth zoom allow a precise reproduction of defined magnifications. The large Field of View is ensured by the 10X/23 eyepieces. The working distance of 110mm. - Total Magnification Range options: - 10x eyepieces = 7.5x - 50x (Included) - 12.5x eyepieces = 9.375x - 62.5x (Not Included) - 15x eyepieces = 11.25x - 75x (Not Included) - 20x eyepieces = 15x - 100x (Not Included) INCLUDED: The Motic SMZ-171-BLED Stereo Microscope with LED Illumination Stand includes: - 10x/23 eyepieces - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 6x4 Stage Objectives 5X, 10 (more)X, 20X, 50X CCIS BD Plan Achromatic & S-Apo (Pb free) DIN (for Brightfield and Darkfield) Optical System Colour Corrected Infinity Optical System (CCIS) Illumination 3W LED Epi-Illumination Kohler Illumination 0.06W LED Features - Panthera TEC models include brilliant optics and smart functionality for extended ease of use. - Features Smart Darkfield with 5 Segment illumination mode. - New LD Plan Achromatic and S-Apochromatic BD objectives & 22mm FOV eyepieces. - Pure incident or incident/ transmitted microscope stands available. - 3W LED of selectable color temperature for incident illumination. - Motic LightTracer: Coded nosepiece & Digital light intensity knob. The Panthera TEC offers high value for the inspection of semiconductors and compound materials, especially in industrial quality control and technical education. Brightfield, Darkfield and Cross Polarization contrast are combined with a new, unique-to-Motic segmental illumination that all contribute to the versatility of this model. This concept allows an oblique incident illumination, perfect for the detection of scratches or other defects on flat and reflecting surfaces without a need to move the sample. BD models feature LD Plan BD objectives with a superb imaging performance, mounted on a 5-fold nosepiece. The light intensity for each objective position is automatically memorized and will be repeated once the objective is swung in again. The compact Epi illuminator carries a slot for polarizer and analyzer, ready for Polarization contrast and to reduce internal reflections. The illuminator also includes the controls for varying the incident light in terms of mode (BF or DF) and illumination angle.INCLUDED: The Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 6x4 Stage includes: - 5X/0.13 (WD 17.3mm) - 10X/0.25 (WD 16.3mm) - 20X/0.40 (WD 7.3mm) - S-Apo 50X/0.80 (WD 1mm) - Dust Cover - Allen Key - Screws for Metal Extension Support - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Beckman L8-80 Ultracentrifuge Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal. Due to the above faults, this item is listed as Spares/Repair. The 3-phase plug has been removed and there is no rotor included in the sale. Also included: 1 x Operation Key1 x Original User Manual

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

F1 class standard: knob weight Nominal value: 20 kg Material: stainless steel Knob weight is excepti (more)onal measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).