Nikon CFI 10x/22 Eyepiece Set for Ti Eclipse Microscope

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Zeiss Microscope Multi Observation Bridge Left and Right with Pointer was removed from a univer (more)sity lab where it was surplus to requirements. This item is in very good cosmetic condition. This item is untested and the PSU is not included.

Leica Leitz DMRB Trinocular Fluorescence Microscope Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and working order; however, one noticeable flaw is the missing paint on the top of the unit. This does not affect its functionality. This microscope was tested with an in-house objective. (not included in sale) Features the following: 1 x Leica Leitz DMRB Trinocular Fluorescence Microscope body.Type 301-371.010.Fitted with the following filter cubes:- I3 513808 - For Blue Excitation. - B/G/R 513836 - For DAPF/FITC/TEXAS RED Excitation. - TX 513802 - For FITC Excitation. - A 513804 - For UV Excitation. 1 x Leica 12volt 100watt Halogen lamp.Type 307-155.001. 1 x Leica 501049 Top swing condenser fitted with a Leica 501000 0.90 S1 Lens. 1 x Leica mechanical stage with specimen holder. 2 x Leica L Plan 10x 25 eyepieces. 1 x QImaging Firewire Camera.01-RET-2000R-F-CLR-12-CCooled Colour 12 Bit.

Leica CTR 6000 TCS SP5 Laser Scanning Confocal Microscope This system was removed from a laboratory  (more)where it was surplus to requirements. The system powers on, with all units functional, including the stage and light sources. According to the previous owner, the system features a Leica SP5 confocal with 3 PMT and 2 hybrid detectors, along with an FCCS system that includes 2 SPAD detectors. The filters for the detectors are beginning to delaminate and will need replacing. The SP5 computer is relatively new and has been updated to Windows 10. A full environmental chamber for temperature and CO2 control is also included. The system consists of: - TCS SP5 Control Desk, Microscope, and Scan Unit (Serial No. 510000038, Year: 2007) - Leica CTR 6000 Controller (Serial No. 280210) - Leica CMS Detection Unit (Part No. BS054407) - Leica APD Detection (Serial No. 65031) - Leica Scan Head/Trigger Box (Serial No. 0051) - Leica Switch Console V3 (Serial No. 0028960) - Leica Cooling Fan and Flexible Duct (Part No. 1531229001) - Leica Mercury Lamp Box (Type 11307072071/BZ) - LEJ Mercury Bulb Controller (Type ebq 100mc-L, Serial No. 06 2380802161, 217 hours bulb run time) - Leica Stage Controller (Part No. 11505180) - The Box polycarbonate microscope enclosure - The Cube CB02A Enclosure Heater with probe (Serial No. 10585) - The Brick Air Humidity and CO2 Regulator (Serial No. 10654) - Gecomp PC running Windows XP Pro (Serial No. 071362) - HP Z4 PC running Windows 10 (Serial No. CZC026C55L, Product No. 1JP11AV) - 2 x NEC 1990SXi Monitors (Serial Nos. 6Z009731YB, 6Y008209YB) - Cherry Keyboard (Model MY 3000 USB, Serial No. G0006934) - HP KB-1469 Keyboard (Serial No. 803180-L31) - 2 x HP Mice (Part Nos. 672651-001, 458407-002) The microscope is fitted with five objectives: - Leica 784 HCX PL APO 100x/1.4-0.7 oil cs - Leica 510 HCX PL APO 63x/1.4-0.6 oil cs - Leica 214 HCX PL APO 20x/0.70 1MM corr bl - Leica 506251 HCX PL APO 40x/1.25-0.75 oil - Leica 506279 HCX PL APO 63x/1.2 W corr cs Additional components: - Twin binocular eyepieces HC PLAN s 10x/125 M - 7 x colour filter and mirror blocks, 2 x filter block covers - 12 x stage parts - 1 x humidity water cylinder for The Brick Included Software & Manuals: - Leica Software Discs: Confocal Software v. 2.585 (2x), LAS AF v. 2.73-9723, SP5 WS Premium Recovery, SP5 SP8 Standard G4 Recovery W10, SP5 Workstation Recovery - 2 x copies of Windows XP Professional OS - Manuals: Newport PR 50 compact high-speed rotation stage, Coherent Sapphire 488-20 & 410-10 OEM Laser, The Brick operating manual, The Cube 2 temperature controller manual

Motic SMZ-171-BP Stereo Microscope Magnifaction Range 7.5x - 50x Standard Working Distance 110mm Op (more)tical System Greenough Features - Stereo microscope - Binocular head - Greenough optical system - 7.5x-50x standard magnification - 110mm standard working distance - Plain pole type stand - Wide variety of options The Motic SMZ-171-BP is a stereo microscope, featuring high quality Greenough optics. Designed for versatility, the SMZ-171-BP can be used in a variety of fields, from medical applications to industrial quality control. This rugged microscope is built to provide clear and distortion free images through many years of daily use. In its standard configuration, the SMZ-171-BP has a working distance of 110mm, providing ample room for dissection instruments and sample manipulation. Working distance refers to the amount of space between the unit’s base and the unit’s objective, and is an important feature of any stereo microscope – the larger this number, the more room users have to operate. Magnification is controlled by a zoom knob on the microscope’s side, enabling users to adjust between 7.5x and 50x in one continuous motion. The zoom knob also contains five indents, so that precise magnifications can be quickly and accurately repeated. This is especially important when taking measurements with micrometers, reticules, and processing software. Motic also offers a wide variety of optional objectives and eyepieces, greatly expanding the magnification range from 2.25x to 200x. Please see the chart below for all possible combinations and their corresponding optical performance. The SMZ-171-BP is presented in a modular format and can be easily modified by the user. A large number of optional illumination sources, stands and filters are available, enabling users to customize the scope to suit their specific application. It is also available in both binocular and trinocular formats. Digital documentation of your work is made simple with any of Motic’s digital microscopy cameras – the Moticam. With over 20 models to choose from, these range from standard resolution, to research grade instruments with integrated cooling devices.INCLUDED: The Motic SMZ-171-BP Stereo Microscope includes: - Power Cord - 10x Eye Piece - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

MULTI-HS 15 DIGITAL VELP MAGNETIC STIRRER SAFETY AND RESISTANCE - Warning message on the display whe (more)n the plate reaches 50°C - The Safety Lock function prevents unintentional changes of settings in order to meet all laboratory safety standards. - The VELP CerAlTop ™ top plate is made of aluminum alloy which guarantees temperature homogeneity with excellent heat distribution and high specific power thanks to the circular configuration. A thin layer of ceramic protects the plate from scratches and chemicals and guarantees high resistance to thermal stress and thermal shock. SMART AND SIMPLE USER INTERFACE The LED display is easy to read and thanks to the intuitive icons the operator will always have an eye on the working conditions: - Active heat - Temperature set point - Activating the timer - Automatic reverse option - Lock button Two extremely precise rotary knobs control the temperature and speed setting and to start the heating you need to press the knob; a small detail that exemplifies Velp's utmost attention to operator safety. By touching both knobs simultaneously, it is possible to access the advanced menu for the most suitable configuration of all operating modes. POWER AND PRECISION - The extremely powerful Brushless motors are able to stir from 100 up to 1000 rpm, offering practically unlimited duration over time. The stirring speed is always constant, even when the viscosity changes, thanks to the SpeedServo ™ torque compensation. - The middle button allows you to set the timer for unsupervised work. The Timer can be set from 1 min up to 99 hours and more advanced configurations can be set in the advanced menu. - The Auto-reverse option improves the kinetics by changing the direction of the stirring direction. You can also set the direction change to your preferred time interval. TECHNICAL FEATURES: Stirring position distance: 74 mm. Stirring speed: 100 - 1000 rpm. Speed setting accuracy: 5 rpm. Temperature setting resolution: 1°C. Hot top warning: on display (>50°C). Timer: from 1 min to 99 h: 59 min. Timer setting steps: 1 min. Autoreverse: from 5 s to 99 min-59 s. Autoreverse setting steps: 1 s.

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 1200 model (measured with ethanol): - a 20°C, 1.20 kW - a 10°C, 1.00 kW - a 0°C, 0.70 kW - a -10°C, 0.40 kW - a -20°C, 0.18 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

110V

Angelantoni Platinum 500 SV Ultra Low Temperature Freezer Lab This item was removed from a universit (more)y where it was surplus to requirement. The unit powers up and is in good working order to -45˚C It is in reasonably good cosmetic condition externally and in good cosmetic condition internally. This item features a key lock with the required key included.

Balance of the AS R2 PLUS series is a standard analytical weighing device of the SYNERGY LAB line. T (more)he AS R2 PLUS is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS R2 PLUS analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Levelling System Standard AS R2 PLUS balances are equipped with a levelling device located at the front of the weighing chamber, which facilitates level control. Levelling operation is now simplified and easier due to the reduced quantity of adjustable supporting points (2 points). Intuitive Operation Balances are equipped with LCD display ensuring clear presentation of the weighing result. Direct access to functions and databases is possible via the following keys: Database – direct access to databases, Function – direct access to basic functions, F1-F4 – programmable function keys and menu navigation keys. AS R2 PLUS analytical balances signal operated working mode, computer connection, weighing and service functions via pictograms. The quantity of displayed weighing units is also expanded. Dedicated status bar enables display of additional messages, e.g. product name, tare value. Real-time mass measurement is presented using bar graph. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. Data Protection Access to valuable information is possible after logging. The administrator manages the data access configuration. ALIBI Memory Data safety is ensured by the ALIBI memory integrated into AS R2 PLUS balances, which enables record of up to 100 000 weighings. ALIBI guarantees continuity of data collection over a long period of time. Databases The information system is based on 5 databases, which allows several users to work with several product databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: operators (up to 10 users), products (up to 1000 products), weighings (up to 5000 weighings), tares (up to 100 tares), ALIBI memory (up to 100 000 weighings). Communication Interfaces The functionality of AS R2 PLUS balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, Wi-Fi (option). Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook.

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] 10 μg for loads ranging from 2 g to 50 kg.