NEW! Thermo Rotor TFT 80.4 Fixed Angle Titan Rotor 10x4,4 ml 80K rpm WX Beckman

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives This was removed from a university lab w (more)here it was surplus to requirements. The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use. It is supplied with;3 x WF 10X Eyepieces.2 x Covers.1 x Eyepiece (no information).1 x 10 x P Eyepiece.1 x Spare Fuse Part No. (670.55327).1 x Tool Part No. (019.0120.0).1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

This Olympus BX40F-3 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit is in reasonable used cosmetic condition but it does have various marks, scratches and signs of general use. The lamp adjustment slider is snapped off but it can still be operated if you put something thin in the hole(ie small flat screwdriver). Please let us know if this is a major problem for you - we may be able to complete a repair or source a replacement. The microscope has been tested using one of our slides and it appears to work well with all fitted objectives. The system consists of: 1 x Olympus BX40F-3 Microscope body.1 x Olympus U-RLA Reflected Light Vertical Illuminator.1 x Olympus U-SVRS Mechanical Stage.1 x Olympus U-AC Brightfield Condensor.1 x Olympus U-TRU Side Camera Port.1 x Olympus U-TR30 Trinocular Head.1 x Olympus U-TVO.5XC-2 Camera Adapter.1 x Olympus U-SPT Phototube fitted with 1 x Olympus Japan PE 3.3X 125 Objective.1 x Olympus U-PMTVC Camera Adapter.1 x Olympus U-LS30-4 Lamp (new bulb fitted). 1 x Vantage Camera.1 x Q Imaging QICam UV Fast Camera. Both cameras are untested. Microscope has the following 4 objectives fitted: 1 x Olympus Japan 103250 IC10MSPlan100.30∞/- f = 180 1 x Olympus Japan T4-100580 IC20MSPlan200,46∞/0 f=180 1 x Olympus Japan 100DPlan Apo100UV1.30 oil160/0.17 1 x Olympus Japan IC150MDPlan 1500.95∞/0 f=180 It is also fitted with a pair of Olympus WH10X/22 eyepieces.

Binocular stereomicroscope StereoBlue SB.1402, target rotating 2x / 4x 20x / 40x magnification with  (more)ergonomic support with illumination LED incident and transmitted. SPECIFICATIONS EYE Pair of eyepieces WF10x / 20 mm with rubber bumpers. HEAD Head binocular with tilt to 45°. Diopter adjustment in a porta-eye. Distance inter-pupillary adjustable between 55 mm and 75 mm All the optics are coated with anti-fungal and anti-reflective to obtain the maximum performance of the light MODELS WITH DOUBLE MAGNIFICATION FACTOR • Nosepiece with objectives-rotating dual 2x / 4x • Magnification 20x / 40x (can be extended to 120x) • Field of view 10 mm / 5.0 mm • Working distance 100 mm SUPPORT • Support of rack-and-pinion of the Series StereoBlue are equipped with bases flat ergonomically designed and two clamps subject samples. Includes plate and transparent plate black/white Ø 60 mm • The approach macromético is equipped with voltage control. • The brackets are made of alloy cast metal with a coating of hardened whitish in color. LIGHTING With illumination incident and transmitted LED 3 W dimmable that can be used simultaneously or separately. PACKAGING Supplied with power cable, case for dust, rubber protectors for the lenses, a spare fuse, tabletops, transparent and opaque, white/black Ø 60 mm) and user's manual. All packed in a box of polystyrene.

Grundfos CRI 1 Vertical Pump Type - A-CA-I-V-HQQV Model - A96532497P20639 This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and draws suction but has not been tested further. It is in reasonably good cosmetic condition, with some marks from use.

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up and is in good working order. It is in reasonably good cosmetic condition with marks from use. Max RPM-1800 Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes. Centrifuge model number- VR maxi-1Centrifuge serial number- 804040235 Freeze dryer model number- CT/DW 110Freeze dryer serial number- 804050097 Maxi dry model number- MAXI-DRY PLUSMaxi dry serial number- 804060037

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams    - Preparation of tablet coatings - Preparation of ointments and pharmaceutical creams - Preparation of cosmetics (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks and paints - Preparation of biodiesel - Dispersion of petroleum derivatives (e.g. asphalt) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

It is 50 cm long. It is compatible with HX7 scales.

Heidolph Hei-VAP Core HL/G3B Coated Hand Lift w/ G3 Vertical GlasswareThe Hei-VAP Series of rotary e (more)vaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core HL/G3B Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3B Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty