Motic B1 Series Compound Monocular Laboratory Microscope with 3 x Objectives Lab

Zeiss Stemi SV 11 Stereo Microscope This item was removed from a university laboratory where it was  (more)surplus to requirements. The microscope is in fair cosmetic condition.The PSU has been fitted with a UK plug, replacing the original American one, and it powers the shutter effectively; operation can be heard when using the switch. The HBO 100 lamp has not been tested as the required PSU is not included. Includes: - HBO 100 mercury lamp (note: bulb usage unknown, no PSU included for the lamp) - Foot pedal and light source - Kramer Scientific HR 10x/0.45 KSC 190-975 Objective - Light pipe (note: no light source included) Specifications: - Model: Stemi SV 11 - Serial No.: 000238

Head: Binocular tube S with a 30° viewing angle Stage: Object stage No. 78 200 x 140 mm with a 76 x  (more)50 mm adjustment range Condenser: Condenser UK with dovetail change and revolving turret for phase contrast Condenser top: 0.90 S 1.1 Lighting: 12V/100 W Lamp housing Objectives: Plan 40x/0.85 Phaco 2, PL Neofluotar 100x/1.32 Oil, PL Neofluotar 100x/1.32 OEL Phaco 3 Oculars: Leitz 10x

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

Zeiss Axioskop Microscope w/ J04Z0H Power Supply Lab This item was removed from a university where i (more)t was surplus to requirement. Both the microscope and power supply are in good cosmetic condition and full working order. The previous client has stated that this microscope was in full working order when it was last used. It has been tested with an in-house objective, which is not included. Includes the following: 1 x Zeiss Axioskop Microscope-2 x Zeiss PL 10 X/ 20 Eyepiece 1 x Zeiss J04Z0H Power Supply 1 x Zeiss 12V 100W Halogen HAL Lamphouse

Leica DM 2500 trinocular microscope. Nikon 10x/26.6 eyepieces. Six position nosepiece. Four Nikon pl (more)an phase objectives including a E10x/0.25; 20x/0.4; 40x/0.65 and oil 100x/1.25. Phase contrast condenser with iris diaphragm and filter holder. Right-handed mechanical stage. LED illumination. User manual. The Leica DM2500 optical microscope is particularly suitable for applications requiring special contrast techniques, such as fluorescence or phase contrast, in fields such as pathology or biomedical research.

Motic AE2000 LED Binocular Inverted Microscope - Basic Package Magnification Range 4x to 10x Optical (more) System Colour Corrected Infinity (CCIS) Illumination 3W LED Features - Entry level model of Motic's inverted microscopes - Designed for routine live cell inspection with an easy and flexible set up - Offers superior image quality when viewing cell cultures in microbiology, living organisms, and tissue - Switch from Brightfield to Phase Contrast by a simple push of the phase ring slider - Fixed stage plate carries a glass or metal insert for quick overview and comfortable change of objectives - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 2 μm - Auto ON-OFF illumination function via built-in IR-sensor - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The AE2000 is a revolutionary design that is packed with features and sets a new benchmark in affordable inverted microscopy. The AE2000 microscopes are Motic’s entry models of inverted microscopes, providing a flexible optical concept to meet best image quality and robust design for a long lifetime under rough lab conditions. This version of the Motic AE2000 is an inverted microscope with a binocular head as well as 4X and 10X objectives. The AE2000 is the perfect microscope for routine microbiology in clinical and pharmaceutical laboratories, also offering best options for university teaching. In full accordance with Motic’s CCIS Infinity System, the LWD Plan Achromatic objectives with an ingenious Phase contrast concept deliver a remarkable image quality. The AE2000 stand carries a quadruple nosepiece with a precise click stop of objective positions. Rich illumination power is given by the 30 Watt Halogen light source in a Fixed-Koehler setup, simply interchangeable with 3W LED modules of different color temperatures. INCLUDED: The Motic AE2000 LED Binocular Inverted Microscope - Basic Package includes: - Widefield High Eyepoint Eyepiece N-WF 10X / 20mm - Side Facing Quadruple Nosepiece - PL PH 4x and PL PH 10x Objectives - Phase Slider Ph0, BF, Ph1 - Centering Telescope & Keys - Plain Stage with Metal & Glass Inserts - 45mm Blue, Green and Neutral Density Filters - ELWD Condenser N.A. 0.30 (WD = 72mm) with Filter Holder - Allen Hexagonal Key and Vinyl Dust Cover - 3W LED with Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The RV 10 digital represents the continual enhancement of the IKA RV 10 rotary evaporator line. The  (more)unit comes with an universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1600 cm² surface extremely efficient. That’s why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Type of cooling: vertical Cooling surface: 1600 cm² Speed range: 5 – 280 rpm Reversible direction of rotation: yes Lift: Motor Stroke: 140 mm Heating temperature range: room temp – 180°C Set temperature resolution: ±1 K Filling volume max: 4 l Timer: yes Dimensions (WxHxD): 500 x 430 x 440 mm Weight: 32.36 kg

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-27316 ICI Heating Bath [condition: Used]ITEM-27321 Fisherbrand Whirlimixer [condition: Used]ITEM-27320 Fisons Whirlimixer [condition: Used]ITEM-27323 Stuart Magnetic Stirrer SM1 [condition: Used]ITEM-27307 Vortex genie 2 [condition: Used]ITEM-27318 Electrothermal Heating Mantle [condition: Used]ITEM-27313 Zeneca Heating Bath [condition: Used]ITEM-27649 ActIn Time AT-80DA [condition: Used]ITEM-27658 Stuart Scientific Vortex Mixer SA3 [condition: Used]ITEM-27308 Speedsafe Yellow Stirrer [condition: Used]ITEM-27651 Grant Stirred Water Bath [condition: Used]ITEM-27648 Pharmacia LKB.EPS 500/400 [condition: Used]ITEM-27644 Denley Well Mixx3 [condition: Used]ITEM-27643 Eppendorf Centrifuge 5315 D [condition: Used]ITEM-27639 Vortex Genie 2 [condition: Used]ITEM-27631 Supply Unit 20W [condition: Used]ITEM-27629 Pharmacia Biotech Electrophoresis Power Supply [condition: Used]ITEM-27633 Stuart Vortex Mixer SA8 [condition: Used]ITEM-27650 Stuart Scientific Autovortex SA6 [condition: Used]ITEM-27642 Techne TC-312 [condition: Used]ITEM-27640 Gallenkamp Magnetic Stirrer [condition: Used]ITEM-27626 Grant Boekel FSR20 [condition: Used]ITEM-27627 Kikusui DC Power Supply [condition: Used]ITEM-27620 Kikusui DC Power Supply [condition: Used]ITEM-27618 LAMB Hotplate [condition: Used]ITEM-27853 Optical Reciever [condition: Used]ITEM-27852 Polarisation Controller [condition: Used]ITEM-27847 Corning Phase Modulator & Driver [condition: Used]ITEM-27844 Bicc Communications 16x16 AWG [condition: Used]ITEM-27843 PriTel Ultrafast Optical Clock [condition: Used]ITEM-27841 FlexLight Optimate 1000NT [condition: Used]ITEM-27840 Porta Systems 1x4 Singlemode [condition: Used]ITEM-27319 Electrothermal Controller [condition: Used]ITEM-27813 Koheras Adjustik [condition: Used]ITEM-27536 Titertek Unit [condition: Used]ITEM-27531 Rocky Biometra Shaker [condition: Used]ITEM-27530 Grant Water Bath [condition: Used]ITEM-27526 Stuart Orbital Shaker [condition: Used]ITEM-16236 SeeScan Imaging Model i3000 With Mouse Lab [condition: Used]ITEM-27507 Scigene Hybex Microsample Incubator [condition: Used]ITEM-27513 AND EK-600H Scales [condition: Used]ITEM-27523 Staurt Battery Stirrer [condition: Used]ITEM-27518 Sartorius Scales [condition: Used]ITEM-27520 Fisons Whirlimixer [condition: Used]ITEM-27528 Gallenkamp Magnetic Stirrer [condition: Used]ITEM-27525 Gallenkamp Magnetic Stirrer [condition: Used]ITEM-27521 Hanna Magnetic Stirrer [condition: Used]ITEM-28247 Tectronix Instrument [condition: Used]ITEM-28249 Hook & Tucker Rotamixer [condition: Used]ITEM-28248 Chiltern Vortex Mixer [condition: Used]ITEM-28250 Farenell 60 MHz Oscilloscope DTV 60 [condition: Used]ITEM-28357 Hanna Magnetic Stirrer [condition: Used]ITEM-28366 Consort E312 [condition: Used]ITEM-28354 Exogen Fracture Healing System 2A [condition: Used]ITEM-28355 Exogen Six Channel Research Device [condition: Used]

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 4 mass standards and 1 pair of gloves.

Boekel Scientific 234100 UV Crosslinker, Adjustable Height, 115VWhether you are crosslinking DNA or  (more)RNA,conducting Northern, Southern dot or slot blot analysis or UV curing, The BoekelScientific 234100 UV Crosslinker AH provides a safe, time-efficient solutionwith a controlled amount of ultraviolet radiation. The researcher now gets moreaccurate results by utilizing our unique-to-the-market, adjustable heightfeature. This feature gives much more true-to-life readings by keeping sampleson the base of the chamber, at the same distance from the bulbs as the fixed UVsensor. Instead of building up samples to get them closer to the bulbs simplyadjust the bulbs to get them closer to your sample! The microprocessor detectsthe exact energy of the bulbs and compensates accordingly. The unit comes equipped with 5 254 nm Shortwave Bulbs No more manual calibration required when switching between wavelengths. The Boekel UV Crosslinker AH comes calibrated for 254 nm Shortwave Bulbs as well as 306 nm and 368 nm bulbs. Change your bulbs and select your bulb choice on the display – that’s it! Large UV protective window allows for easier process inspection Two modes of operation – Energy or Time Open Door Safety mechanism Energy Efficient electronic ballasts Small footprint UL/CSA/CE Approved Click Here to View Product Video INCLUDED: The Boekel Scientific 234100 UV Crosslinker, Adjustable Height, 115V includes: - 5- 254 nm Shortwave Bulbs - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty