Leitz Wetzlar PL Fluotar 25/0.60 160/0.17 Objektiv Microscope Objective 519870

This Leitz Laborlux K Binocular Microscope was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks and scratches from where stickers had been removed. Head - 512 661 2 x Eye Pieces -Periplan 10 x / 18 (519 748) 4 x Objectives:-160/- EF 10/0.25 (519760)160/0.17 EF 40/0.65 (519762)160/0.17 EF 100/1.25 OEL (519804)160/- EF 4/0.12 (519759) Condenser Head - 0.90ASS1.1 (513548)Condenser Swing top (513547)

Arcturus PixCell II Laser Capture Microdissection Microscope System Lab This system was removed from (more) a university where it was surplus to requirement. All units are in good cosmetic condition and powered up, although due to the faults listed below this system is listed as Spares/Repair.  Faults: - The PCi graphics card is faulty. - Camera not included to operate as a complete system. - The microscope does not include any eyepieces or objectives. - The control unit cable sleeving is damaged. The system comprises the following: Arcturus PixCell II Microscope Arcturus PixCell II Control unit Computer - Dell OptiPlex GX1 - Software installed: Arc200 1.0.2 Monitor - NEC MultiSyncLCD1550V

Reichert-Jung MicroStar 110 Illuminator Model 1130B Microscope This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Includes 4 x objectives: -Plan Achro 40/.66-Plan Achro 20/.50-Plan Achro 4/.12-Plan Achro 10/.25 Includes 2 x eyepieces 10 x W.F. Model- 1130BS/N- 265161

Motic BA410E Trinocular Sextuple Compound Microscope - Premium Phase Lab Package Magnification Range (more) 4x to 100x Optical System Colour Corrected Infinity (CCIS) Illumination 12V/50W Halogen or 12V/3W LED Features - Flagship model with highest level of optical performance - Phase equipment included allowing users to view samples using phase contrast - Maximum clarity in colour and resolution - Expanded resolution power for more detailed specimen evaluation - Light intensity adjustment with memory for each objective position - Rackless stage allows safe and fast throughput of slides - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 1 μm - Auto ON-OFF illumination function via built-in IR-sensor - Focusable and centerable swing-out Abbe condenser - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The BA410 Elite is Motic’s brand new approach for a professional research microscope with best image quality options. This version of the Motic BA410E is a trinocular sextuple microscope with a trinocular head, a CCIS Plan Achromat EC-H PL4X objective, and CCIS Plan Phase objectives EC-H Ph10X, EC-H Ph40X S, EC-H Ph100X S-oil objectives for professional research utilizing the phase contrast microscopy technique. Universities and laboratories with applications in hematology, cytology, and histology will benefit from this flexible microscope platform with a superb performance in optics and mechanics. Following Motic’s CCIS Infinity concept, the new Plan Apochromatic objectives may be chosen to get maximum image fidelity. Expanded resolution power in terms of numerical aperture and stunning color reproduction allows a reliable sample evaluation in all biomedical environments. The established EC-H Plan Achromatic bright field objectives are an integral part of the standard configurations, while Phase contrast is feasible with positive and negative Phase lenses included with this package.The BA410E stand carries an encoded 6-fold nosepiece that memorizes the light intensity setting for each objective position. This light memory function replicates the last setting once the respective objective position is swung in again. The rackless stage without a prominent gear rack allows a safe and fast throughput of slides. A ceramic stage insertion withstands abrasion for a long lifetime. INCLUDED: The Motic BA410E Trinocular Sextuple Compound Microscope - Premium Phase Lab Package includes: - Widefield High Eyepoint Eyepiece WFPL 10X / 22mm - Rubber Eyecup (Paired) - Reversed Sextuple Nosepiece - Phase Contrast 5 Position (BF, DF, PH1, PH2, PH3) Turret Condenser - Phase Centering Telescope - CCIS Plan Achromat Objective EC-H PL4X - CCIS Plan Phase Objectives EC-H PH10X, EC-H PH40X S, EC-H PH100X S-oil - Low Position Rackless Stage - Achromat Swing-Out Condenser N.A. 0.90 with Iris Diaphragm - Immersion Oil (5 ml), Allen Hexagonal Key, Vinyl Dust Cover, Blue Filter, Spare Fuse, and Arm Rest - Koehler Illumination Quartz 50W Halogen and 3W LED with External Lamp House and Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED Objectives S-A (more)PO (Fluor) 4X, 10X, 20X, 40X, 100X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Equipped with a 6-channel turret and high-powered LUMOS LED for superior fluorescence illumination. - Delivers high color fidelity and resolution with a 23mm FOV. - Features Plan UC Fluor objectives for ultra-flat, high-contrast imaging, ideal for UV-Visible fluorescence. - Includes two empty filter cubes for customizable application needs. - Allows precise focus adjustment for both eyepieces. - 4X to 100X, accommodating various magnification needs. - LUMOS FL LED provides over 20,000 hours of operation. The Motic PA53 FS6 EDF is a high-end fluorescence life-sciences trinocular microscope equipped with a 6-channel fluorescence turret, featuring pre-mounted DAPI, FITC, and TRITC filter cubes, plus two user-configurable empty filter cubes. Its superior optics deliver high color fidelity and resolution, with a 23mm field of view. The PA53 FS6 EDF boasts a reflective fluorescence illumination system with a powerful LUMOS LED and a transmitted 100W Halogen light source. INCLUDED: The Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED includes: - S-APO (Fluor) 5X, 10X, 20X, 50x, & 100X Objectives - Motic Fluorescence Imaging Software Plug-In - Motic Images Plus 3.0 Software - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

TMC Optics Table Model 63-530 This item was removed from a university where it was surplus to requir (more)ements. The unit is in good used cosmetic condition. Dimensions: - Stand: Height 72cm, Width 86cm, Length 78cm - Table Top: Height 11cm, Width 90cm, Length 75cm - Combined Unit: Height 83cm, Width 90cm, Length 78cm Features: - Table hole spacing: 25.4mm (10”) Imperial format.

Memmert IF160plus Forced Circulation Incubator 161L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 161 L (5.7 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 161 L (5.7 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF160plus Forced Circulation Incubator 161L, 115V provides precise temperature control with a working range from Min. 10°C above ambient up to +80°C, ensuring reliable environmental conditions for laboratory applications. With a spacious 161 L (5.7 cu.ft.) stainless steel interior, this incubator is designed for easy cleaning and long-lasting use. It features TwinDISPLAY adaptive multifunctional digital PID-microprocessor control, allowing users to adjust parameters like temperature, fan speed, air flap position, and program time with high accuracy, thanks to its two high-definition TFT-color displays. For safety and efficiency, the IF160plus includes AutoSAFETY with integrated over- and undertemperature monitoring, as well as a mechanical temperature limiter TB, ensuring optimal protection for your processes. The Function SetpointWAIT ensures that the process starts only after reaching the set temperature. Additional features include forced air circulation, adjustable in 10% steps, and a sterilization program for chamber cleaning at 160°C for 4 hours. These advanced features make the IF160plus ideal for precision-driven lab environments requiring robust performance. INCLUDED: The Memmert IF160plus Forced Circulation Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The Pallchek™ Rapid Microbiology System is the first of its type to be used in an approved protocol  (more)for microbiological applications in FDA and EMEA registered drug manufacturing processes, using the ATP bioluminescence technique. The Pallchek system can be used as a much faster alternative to conventional microbiological quality control methods, or may be used to supplement existing methods. It is also a much lower cost, more convenient option than all other rapid microbiological test methods, with equivalent or better sensitivity. Excl. accessories See PDF for more info: 5656

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

HANNA EDGE multi-parameter pH meter Without probe With power supply Attention, no battery, must oper (more)ate on mains power