Leitz Wetzlar Milar f=6,5cm 1:4,5 Objektiv Lens Objective 65

Nikon Japan Plan UW 2X/0.6 Objective Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This Leica ATC 2000 Compound Microscope was removed from a university lab where it was surplus to re (more)quirements. The unit powers on and is in good cosmetic condition. The Lamp and stage are operational. We tested it with a slide and it is fully working. Included with it are 3 x Objectives; 1 x Red Leica 438 Achro 4/0.1 ∞ /0.17 1 x Yellow Leica 439 Achro 10/0.25 ∞/0.17 1 x Blue Leica 440 Achro 40/0.66 ∞/0.17 2x EyepiecesLeitz Wetzlar Germany Periplan GF 12.5x

Leica DMIL Inverted Microscope Type 090-135.001 This was removed from a university lab where it was (more) surplus to requirements. The unit powers on and is in working order. The focus knob is quite stiff but the fine adjustment works as intended. It is in good cosmetic condition with minor marks. Includes: -Leica ∞/-/ C PLAN L 10x/0.22 PH 1 (506078)-Leica ∞/0-2 C PLAN L 20x/0.30 PH 1 (506152) 2 x Eyepieces:-Leica 10X/18 (527000)-Leica 10X/18 M (527001)

This Olympus BX40F-3 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit is in reasonable used cosmetic condition but it does have various marks, scratches and signs of general use. The lamp adjustment slider is snapped off but it can still be operated if you put something thin in the hole(ie small flat screwdriver). Please let us know if this is a major problem for you - we may be able to complete a repair or source a replacement. The microscope has been tested using one of our slides and it appears to work well with all fitted objectives. The system consists of: 1 x Olympus BX40F-3 Microscope body.1 x Olympus U-RLA Reflected Light Vertical Illuminator.1 x Olympus U-SVRS Mechanical Stage.1 x Olympus U-AC Brightfield Condensor.1 x Olympus U-TRU Side Camera Port.1 x Olympus U-TR30 Trinocular Head.1 x Olympus U-TVO.5XC-2 Camera Adapter.1 x Olympus U-SPT Phototube fitted with 1 x Olympus Japan PE 3.3X 125 Objective.1 x Olympus U-PMTVC Camera Adapter.1 x Olympus U-LS30-4 Lamp (new bulb fitted). 1 x Vantage Camera.1 x Q Imaging QICam UV Fast Camera. Both cameras are untested. Microscope has the following 4 objectives fitted: 1 x Olympus Japan 103250 IC10MSPlan100.30∞/- f = 180 1 x Olympus Japan T4-100580 IC20MSPlan200,46∞/0 f=180 1 x Olympus Japan 100DPlan Apo100UV1.30 oil160/0.17 1 x Olympus Japan IC150MDPlan 1500.95∞/0 f=180 It is also fitted with a pair of Olympus WH10X/22 eyepieces.

Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (5x, 10x, 20x) PA Objectiv (more)es APO 5X, 10X, 20X Parfocality Adjustable Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for moulding to different types of research and usage. The PSM1000 is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (5x, 10x, 20x) PA includes: - APO 5X, 10X, 20X Parfocality Adjustable Objectives - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Displays viscosity (cP), % Torque, spindle number and speed simultaneously on a 16-character x 2 lin (more)e backlit LCD. 18 Speeds for greater range capability (0.3, 0.5, 0.6, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 ,10, 12, 20, 30, 50, 60, 100 rpm) Accuracy 1% Repeatability 0.2% Auto range function to display full scale range for speed and spindle combinations Including; Lab Stand Carrying Case

Temperature range: -50°C to -86°C (at 32°C maximum ambient operating temperature) Cool down time: 3. (more)7 hours (from 25°C to -85°C, freezer empty) Alarms: High/Low temperature, power fail, battery low, filter clean, fault Capacity: 101 L Internal Dimensions (HxWxD): 640 x 480 x 330 mm Dimensions (HxWxD): 830 x 900 x 566 mm Weight: 116 kg

Applied Biosystems 7500 Fast Real-Time PCR System Lab This system was removed from a university lab, (more) where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes the following: - Real-Time PCR Systems - Chemistry Guide - Applied Biosystems Site Preparation Guide - Applied Biosystems Getting Started Guide - Allelic Discrimination Guide - 7500 Fast Real-Time Software V1.4 - MicroAmp Adhesive Film

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Labconco CentriVap Acid-Resistant Benchtop Concentrator Durable, acid-resistant components throu (more)ghout the vapor path Can be used with samples containing 0.1 to 1%TFA, hydrochloric acid, acetic acid, hydrobromic acid, ammonium hydroxide, and sodium hydroxide PTFE-coated aluminum chamber with glass lid, large phenol-free lid gasket and safety sensors Brushed, stainless steel and glacier white, epoxy-coated steel exterior w/blue accents 300-watt heater increases temperature in one degree increments up to 100C Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump Quick-Stop system stops vacuum pump, open valve and stop rotor Memory stores nine user-set programs Brushless motor spins up to 1725RPM Automatic vacuum release valve Easy-to-read LCD display Separate heat and run times, each from 1 to 999 minutes PREHEAT/COOL button to reach set point temperature Audible alarm signals completion of set point run time Electrical receptacle enables connection of accessory vacuum pump Vacuum pump has quick disconnect fitting for connection of a vacuum gauge 12 in. dia. Chamber accommodates a wide variety of rotors, including microtiter plate rotors for 96-well plates INCLUDED: The Labconco 7810016 CentriVap Acid-Resistant Benchtop Concentrator includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty