Leica DMI3000B Inverted Fluorescence Microscope GR N2.1 2,5x 5x 10x 20x 40x

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

one CLASSIC Vintage MicroscopeManuf: RHEIN - OPTIK ; Berlin / Leitz Wetzlar / GERMANYdescription:6 e (more)yepieces...............5X......10X.......10X.....15X....15X periscopic......20X periscopic turret with 3 objectives 10 : 1 N.A. 0.30........45 : 1 N.A.  0.30.......100 : 1 Oil Immersion mechanical stage with X-Y precision drives condensor with diaphragm adjustable mirror double sided ( hollow and plane ) with wooden caseinstrument is in used condition with traces of use and 100 % functional a VERY RARE to find VINTAGE Microscope from RHEIN-OPTIK / GERMANY

This ZEISS AxioLab 5 Teaching Head was removed from a university lab where it was surplus to require (more)ments. This item is in very good cosmetic condition. Objectives included: 2 x Carl Zeiss W-PI 10x/23

Zeiss Axio Vert.A1 FL Inverted Microscope This system was removed from a university lab where it was (more) surplus to requirements. The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted. The instrument is configured as follows: - 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000) - Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination - Reflector modules: DAPI, FITC, TRITC, empty - 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000) - Position 1: empty - Position 2: 424228-9060 0.05T Neutral density filter 0.05 - Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55 - Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55 - Position 5: empty - 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000) - 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000) - 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23 - 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000) - 1 x Camera adapter 60N-C 2/3" 0.5x (426112) - 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00) - 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000) - Object guide M, 130x85mm, for Axio Vert (432333-9040-000) - 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

Microscope trinocular Delphi-X Observer DX.1153-PLi eyepieces SWF 10x / 25 mm Ø 30 mm lenses with a  (more)correction to infinite (IOS) plane achromatic PLi 4/10/20 / S40 / S100x oil immersion, 60 mm parafocal, plate 190 x 152 mm with mechanical stage built-in x 78 x 32 mm and 3 W of lighting NeoLED ™ SPECIFICATIONS EYE • Super wide field SWF10x/25 mm for the porta-eye Ø 30 mm HEAD Trinocular design Siedentopf tube inclined at 30°. Distance inter-pupillary adjustable between 47 and 78 mm head trinocular standard has a selector of the optical path of three positions (100:0 / 80:20 / 0:100). Correction ± 5 diopters in both eyepieces. REVOLVER HOLDER OBJECTIVES Revolver holder objectives sextuple oriented towards the interior and are mounted on ball bearings of high precision. With screw thread for objectives of 25 mm diameter OBJECTIVES PLANE ACHROMATIC The Delphi-X Observer ™ comes standard with the objectives of the EIS corrected infinity Plane achromatic 4x / 0.10, 10x / 0.25, 20x / 0.40, S40x / 0.65 and S100x / 1.25 oil-immersion APPROACH Approach macro and micrometric coaxial, 100 graduations, accuracy of 1 μm, 100 μm by the rotation, the range of total displacement of about 35 mm Is supplied with a top elevation of the plate adjustable to prevent damage to the sample and the objectives. The focus system coarse has tension adjustment. The focus knobs micrométricos can be changed from left to right (for a magnetic system) in accordance with the preferences of the user STAGE Plate 190 x 152 mm with mechanical stage mechanical integrated right 78 x 32 mm With coating glass-Gorilla resistant to scratches. Stage mechanical for left-handed available upon request (Reference request: Add -L to the product number) CAPACITOR Abbe condenser with tiltable lens A. N. 0.90/1.25 with identification marks of the numerical aperture. Adjustable in height. Iris diaphragm HIGHLIGHTS DIASCÓPICAS • Type-Köhler-intensity adjustable by NeoLED™ 3W with internal power supply 100-240 V NeoLED™ The innovative design NeoLED™ is a combination of LED and custom lens thin specially designed with a short focal length to obtain three main benefits: • You can capture more oblique light from the LED light source, which significantly increases the light output • It requires less energy to reach this level of intensity of light • The greater opening of NeoLED™ allows the optical systems of the microscope to produce images with higher resolutions, very close to the diffraction limit of theoretical optics SENSOR ICARE This sensor allows to avoid the loss of unnecessary energy. The illumination of the microscope automatically switches off shortly after the user stops in front of the microscope CARRY HANDLE The carry handle on the back of the microscope guarantees a safe transportation of the microscope and the tool and the porta-tools integrated to ensure that the right tool is always available PACKAGING Supplied with power cable, protective cover, replacement fuse, user manual and small bottle of immersion oil 5 ml. Case of polystyrene

Motic PA43 BIO PH Trinocular Upright Biomedical Microscope Objectives 4X, PH 10X, PH 40X, PH 100XPla (more)n UC Phase & Darkfield Accessory Phase Centering Telescope Illumination Kohler Illumination 6V/30WLED 3W Features - Transmitted Kohler illumination System ensures for the best optical quality, with additional flexibility between traditional 30W Halogen or LED illumination - Automatic power saving mode for whenever the microscope is left temporarily. Timeframe to activation is selectable by the user and allows protection of your samples from the heat of the illuminator. - ECO mode also results in energy savings which will extend the lifetime of the lamp, and also reduces overall operational costs. - The IL Function provides an optimized, consistent, and even brightness in illumination to allow maintained brightness level even if the observation magnification is changed during observation. - Equipped with a specially designed rackless stage, the ceramic coated surface provides durability and reliability, and offers an easy-to-use ergonomic stage with zero backlash. - The PA43 offer a good variety of contrast accessories that are available and easily upgradable to meet different requirements. The PA43 BIOMED is a new series from Motic Scientific, and represents a large step forward in combining modularity with ergonomics to improve application imaging workflows. A progression into routine work, this new microscope’s robust design and solid footprint does not compromise on optical quality and features. Its modularity offers flexibility when choosing a configuration that suits multiple end-user applications, from cost-effective solutions to high-quality optical systems for lab diagnostics. The microscope is not only modular but also flexible in design and can be upgraded at any time.INCLUDED: The Motic PA43 BIO PH Trinocular Upright Biomedical Microscope includes: - Plan UC Objectives: 4X/0.1, W.D=30.5mm & 100X/1.25 Oil, W.D=0.16mm - Phase Contrast Objectives: 10X/0.25, W.D=17.4mm & 40X/0.65, W.D=0.6mm - Phase Centering Telescope - Blue Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

https://es.sysmex-flowcytometry.com/reagents/antibodies/

Ohaus Guardian 5000 e-G52HS10C Hotplate Stirrer, 120V Temperature Range Ambient +5°C to 500°C Speed  (more)Range 50 rpm to 1,800 rpm Capacity 22 L Features - Heating and stirring capacity up to 22 L with reliable performance - Temperature range from ambient +5°C to 500°C for versatile applications - Wide speed range of 50 to 1,800 rpm for flexible mixing - 10 x 10 inch ceramic plate for consistent heat and stir support - High-contrast LCD display for clear monitoring of settings - Ethernet, USB, and RS232 options for enhanced connectivity - CE and TUV certified for reliable safety standards - Integrated timer adjustable from 1 minute to 99 hours, 59 minutes The Ohaus Guardian 5000 e-G52HS10C Hotplate Stirrer, 120V, is designed to deliver dependable heating and stirring for demanding lab applications. With a large 10 x 10-inch ceramic plate, it provides consistent heat distribution up to 500°C and stirs up to 22 liters with precision, making it ideal for a range of research and industrial settings. The speed range of 50 to 1,800 rpm accommodates various stirring needs, from gentle to intense mixing. Equipped with a high-contrast LCD display for easy monitoring, this model also features Ethernet, USB, and RS232 connectivity options for streamlined data management. The Guardian 5000 prioritizes safety with CE and TUV certifications and offers a programmable timer from 1 minute to 99 hours and 59 minutes, making it a versatile and user-friendly choice for advanced lab workflows. INCLUDED: The Ohaus Guardian 5000 e-G52HS10C Hotplate Stirrer, 120V includes: - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 100 g.

Edwards T-Station 85H Dry Turbo Station CF63, 100-120V Ultimate Pressure <5 x 10-9 mbar Inlet Con (more)nection DN 63 CF Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station CF63, 100-120V includes: - T-Station Pumping Station Base - XDD1 Diaphragm Pump - nEXT85H Turbomolecular Pump with CF63 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty