VWR vortex mixer

Yamato LM-200A Overhead Flask Mixer, 115V Speed Range 50~1000 rpm Max. torque 0.1N•m Adaptable flas (more)k size 50~5000 ml Features - Wide range rotation speed of 50-1000 rpm - Maintenance free and superior DC brushless motor - Belt drive transmission minimizes noise and vibration - Capable of vacuuming up to 399.9Pa without impairing rotation efficiency - Directly attachable to a three-neck flask 24/40, 29/42 optional - Variety of stirring shafts and blades available to handle small to large volume samples - Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon®rubber seal available as option - At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option - Equipped with 24/40 rotary joint, 29/42 optional - Capable of AC100-240V by changing power cord Compact design laboratory flask stirrer featuring integrated drive and stirring seal allowing direct installation of flask and stirring in a vacuum and sealed state. Equipped with digital indicator. Wide range rotation speed of 50-1000 rpm. Maintenance free and superior DC brushless motor. Belt drive transmission minimizes noise and vibration. Capable of vacuuming up to 399.9Pa without impairing rotation efficiency. Directly attachable to a three-neck flask 24/40, 29/42 optional. Variety of stirring shafts and blades available to handle small to large volume samples. Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon®rubber seal available as option. At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option. Equipped with 24/40 rotary joint, 29/42 optional. Operating speed range 50-1000 rpm. INCLUDED: The Yamato LM-200A Overhead Flask Mixer, 115V includes: - Hexagon socket head cap screw & wrench - AC Adapter - 3m Power Cord - Coupling Cover - Handle - Flask Clip - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark Incu-Mixer MP2 Heated Plate Vortexer The new Incu-Mixer MP series by Benchmark Scientific  (more)is designed to provide an optimal method for vortexing and incubating microplates. Simultaneous heating from both the bottom surface and the lid provide temperature uniformity throughout the sample. Additionally, the heated lid minimizes evaporation and prevents condensation. A compact, 2mm orbit ensures thorough mixing in microplates without splashing. Speed, time and temperature are all displayed in real time on the large LCD screen while an internal validation system constantly monitors all parameters for accuracy. Designed for application flexibility, the Incu-Mixer series is available in two, and four-plate capacities. Independent time, temperature and speed controls allow the mixer to function as 3 machines in one; a multi-plate incubator, vortexer, or a combination of the two. The Incu-Mixer MP series is ideal for a wide variety of molecular biology applications including immunochemical reactions, enzyme and protein analysis, and microarray analysis. INCLUDED: The Benchmark Incu-Mixer MP2 Heated Plate Vortexer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This model is particularly suitable for simple mixing tasks. In short-term operation mode, the shaki (more)ng motion is triggered by pressure on the test tube tray. This mode is suitable for mixing up solutions, for example. Persistent cell pellets can be dissolved gently but powerfully in continuous operation. With a speed of up to 2500 rpm and a shaking orbit of 5 mm, reliable and uniform distribution of solids, and homogenization of highly viscous media are guaranteed. Motion: vibrating Rotation speed range: 200 – 2500 rpm Operating Mode: automatic or continuous Orbit/Stroke: 5 mm

Type of movement: orbital Shaking stroke: 4.5 mm Permissible ON time: 100 % Speed range: 200 – 2500  (more)rpm Speed display: scale Operating mode: continuous operation Touch function: yes Dimensions (WxHxD): 115 x 80 x 230 mm Weight: 3.2 kg

All the outstanding features of the Reax Top’s “little brother” can be found in this model: a rotati (more)onal speed of up to 2,500 rpm and a 5 mm shaking orbit. The electronic speed control and the scaling of the speed display allow precise settings. Applications that require a determined speed are thus shaken more gently. Shear force-sensitive organisms remain particularly protected by the constant speed in the low range. Motion: vibrating Rotation speed range: 0 – 2,500 rpm Operating Mode: automatic or continous Orbit/Stroke: 5 mm

Sanyo MCO-18AC CO2 Incubator This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labconco FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collecto (more)r Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. The Stoppering Tray Dryer featuresthree 16.5" x 12" processing shelves. A single 1 hp HCFC/CFC-freerefrigeration system and 1000-watt electric heater cool and heat the fluidmedium circulating through channels in the shelves. Lyo-Works™ OS provides areal time display of freeze dryer and tray dryer parameters on a 5" fullcolor, capacitive touch screen. Models with PTFE-coated collectors that canwithstand corrosive compounds are available. Features Upright stainless steel collector coil holds 6L of ice before defrosting Environmentally-friendly HCFC/CFC-free refrigeration system cools the collector to -50C (-58°F) Internal coil maximizes vapor-trapping efficiency Optional PTFE-coated collectors withstand corrosive compounds Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level Vacuum break valve that bleeds air into the system when power to the freeze dryer or vacuum pump is shut off. If a power outage less than approximately 5 minutes occurs, the freeze dryer will restart and the refrigeration and vacuum system will resume operation once power is restored. If the power failure is more than approximately 5 minutes and the collector warms above safe limits, the freeze dryer will not automatically restart. FreeZone™ Stoppering Tray Dryer provides precise control and program flexibility for consistent performance. INCLUDED: The Labconco 700622000 FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

You can start a measurement or calibration with just one push of a button. The menu settings are int (more)uitive and consist of complete sentences in 12 languages. Read all relevant data at a glance, thanks to the 4.3″ color display with large numbers and clear icons. Increase the productivity of your instrument by connecting peripherals such as a printer, PC, USB stick and barcode reader. Parameter: pH, Ion, ORP Channel: Single Channel Measuring range pH: -2 to 20 Resolution pH: 0.001, 0.01, 0.1 Accuracy pH: ±0.002 Ion concentration measuring range: 1.00E-9 to 9.99E+9 Ion Concentration Resolution: 3 or 4 Digits (Auto) Ion concentration accuracy: ±0.5% Measuring range mV: -2,000,000 to 2,000,000 Resolution mV: 0.1, 1 Accuracy mV: ±0.1 Temperature range: -30°C to 130°C Temperature resolution: 0.1°C Temperature Accuracy: ±0.1°C Security & Compliance: Password Protection, GLP, User Management Memory size: 1,000 measurements Data transfer: PC, Printer, USB stick Flexibility and modularity: Stirrer, Barcode Scanner Compatible with Intelligent Sensor Management (ISM): Yes

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW