Eppendorf Thermomixer

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sample preparation stirrer Modernize your laboratory with Guardian 5000 Series shakers, designed to  (more)be safe and deliver exceptional safety and superior performance. Numerous cutting-edge Ohaus features: - SafetyHeat system to protect the laboratory: an industry-leading sensing system uses two independent safety controls to continuously monitor the electronics and shut off the heat before it overheats - Powerful and consistent shaking performance: precise stirring from 60 to 1600 rpm is made possible by the design of a powerful, robust motor with magnet and software controlled ramp rate, ensuring safe stirring even for viscous applications. - Easy to read LCD display with everything you need to know: the bright LCD display includes temperature and speed settings, intuitive icons and hot top indicator - Durable and reliable with SmartHousing: smartHousing is resistant to chemicals with an innovative and easy to clean design; the lines allow any liquid spills to drain out of the instrument Available models: Model e-G51HP07C: plate 178x178mm; flow rate 15 litres; ceramic plate; heating up to 500°C. Model e-G51HS07C: plate 178 x 178mm; flow rate 15 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HS10C: plate 254x254mm; flow rate 18 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HSRDM: plate Ø135mm; flow rate 18 litres; aluminum plate; heating up to 380°C and stirring up to 1600rpm. Model e-G51ST07C: plate 178x178mm; flow rate 15 litres; ceramic plate; stirring up to 1600rpm. Applications Boiling water, water/oil bath preparation, sample and solution preparation, dissolution buffers and reagents, sample concentration Display Backlit LCD display for temperature and speed, green lights when unit is heating and agitating, prominent hot light, probe in use icon, single point calibration icon Operation Stirring from 60 to 1600 rpm, ambient temperature range from +5°C to 500°C (ceramic top) or 380°C (aluminum top), power cord (included), the stirring models include a 1.5” (3.8cm) PTFE coated stir bar Construction Probe connection, SmartHousing™ stays cool to the touch and is resistant to chemicals, IP21 rated, polycarbonate front panel, control knobs, On/Off switch to disconnect heater, integrated pole holder, easy-to-use ceramic or aluminum tops to clean Characteristics Hot top light, audible alarm, SafetyHeat™ protection shuts down heater in case of malfunction, temperature calibration function for 3 probes and 3 platen setpoints

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg

MARSHALL Select MS-RE80A Tube Rotator Mixer, 0-80 RPM Speed Range 10 to 80 RPM Motor Type DC Motor O (more)perating Mode Continuous or Timing Features - Provides easy monitoring of speed and time settings - Made from stainless steel with an oxidation coating for longevity - Available in both plastic and stainless steel to suit various needs - Supports tubes of 1.5ml, 15ml, and 50ml for flexible use - Offers flexibility with continuous or timed modes up to 1199 minutes - Ensures reliable and consistent performance The MARSHALL Select MS-RE80A Tube Rotator Mixer is a highly adaptable and efficient solution for laboratory applications that require precise sample agitation. Offering an adjustable speed range from 0 to 80 RPM, this mixer provides fine-tuned control to meet diverse experimental requirements. The easy-to-read LCD display allows for accurate monitoring of speed settings, ensuring consistent and reliable mixing. Built with durable materials, the tube holder is crafted from stainless steel with an oxidation coating, and the clips come in both plastic and stainless steel options to accommodate tube sizes of 1.5ml, 15ml, and 50ml. The mixer can operate in continuous or timed modes, providing flexibility for various protocols. Equipped with a dependable DC motor and consuming just 40W of power, the MS-RE80A is both energy-efficient and highly effective. Its compact design, along with standard accessories such as a tube holder and stainless steel clips, makes it a valuable addition to any laboratory setup, with external dimensions of 20.1 x 8.7 x 10.2 inches and a gross weight of 3kg. INCLUDED: The MARSHALL Select MS-RE80A Tube Rotator Mixer, 0-80 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VWR Mini Vortex Mixer The VWR Mini Vortex Mixer: a compact is a user-friendly lab essential. With a  (more)durable head for tubes up to 30mm, stability is ensured by the refined steel base. Terrific for a variety of applications, with the ability to powerfully vortex tubes up to 30mm. Features: - Extremely compact and easy to operate - Powerful vortexing for tubes up to 30 mm - Head is made of durable material to ensure long life - Refined steel base is designed to ensure product stability INCLUDED: The VWR Mini Vortex Mixer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 6 Months Parts and Labor Warranty VWR Mini Vortex Mixer Technical SpecificationsCatalog Number10153688Speed3,000 RPMOrbit4.5 mmTube diameter (maximum)≤30 mm (1.18")Product Dimensions W x D x H3.8125" x 3.375 96 x 85 mmShipping Weight0.55 KgDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Scilogex MX-M Microplate MixerThe Scilogex MX-M Microplate Mixer is ideal for mixing or shaking 96 w (more)ell microplates. The mixer's high speed and small orbit combine to offer vortexing action in each well of the microplate for complete and uniform mixing. Click Here to View Product Video INCLUDED: The Scilogex MX-M Microplate Mixer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

TMC Optics Table Model 63-530 This item was removed from a university where it was surplus to requir (more)ements. The unit is in good used cosmetic condition. Dimensions: - Stand: Height 72cm, Width 86cm, Length 78cm - Table Top: Height 6cm, Width 75cm, Length 89cm - Combined Unit: Height 78cm, Width 90cm, Length 78cm

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - USB port - Electron (more)ics with easily accessible temperature display in the door handle - No sharp edges for easy hygiene control - Gasket heater that minimizes condensation - Easy data archiving - Anti-corrosion structure guaranteed for life Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Polypropylene structure with polyurethane foam that provides strong thermal insulation - Sealed gaskets that minimize the loss of cold air - Monobloc cabinet made with the exclusive rotational molding technique The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

PS.R1 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. New PS.R1 balances like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm. Balances with a smaller pan have a draft shield. They were equipped with the system of external mass adjustment. PS.R1 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). . Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard: Database – a direct access to databasis Function - a direct access to the basic functions F1 to F4 – programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Ohaus PX163 Pioneer Precision Balance, 160 g, 0.001 g Maximum Capacity 160 g Readability 0.001 g Rep (more)eatability (Typical) 0.001 g Features - Maximum capacity of 160 g with a readability of 0.001 g - InCal™ semi-automatic internal calibration for maintaining accuracy - Stainless steel weighing pan with an 120mm diameter for durability - Backlit 2-line LCD display with additional information or guidance on the second line - 2-second stabilization time for quick and reliable measurements - Durable construction with a cast metal lower housing and plastic top housing - Glass draftshield included for protection and stability during weighing - USB and RS-232 connectivity for easy data communication - Static removal bar for convenient grounding and reducing static interference - Integrated weigh-below-hook for specialized weighing applications The OhausPX163 Pioneer PX Precision Balance combines essential weighing functionalitywith competitive performance, offering high accuracy and repeatability forapplications in laboratory, industrial and education settings with internalcalibration. The PX163 weighing plate has a maximum capacity of 160 gramswith a readability of 0.001 grams and a weight stabilization time of 2 seconds.The PX163 is affordably priced, intuitively designed for intelligent operationwith a second line display for additional information, and USB and RS-232connectivity for easy communication.Click Here to View Product Video INCLUDED: The Ohaus PX163 Pioneer Precision Balance, 160 g, 0.001 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo FD200 Immersion Cooler, 115V/60Hz Working Temperature Range -10°C to 30°C Refrigerant R134a  (more)Fluid Type Water, Silicone Features - For applications near ambient temperatures - Integrated freezing protection - Preventing the use of precious tap water for cooling - Compact design, small footprint - Ease of operation - Low energy requirement JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FD200 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty