Boekel Scientific 270800 Mixer, Heat/Cool Thermal Mixer II w/270811 Block

Benchmark BenchMixer Vortexer Speed Variable, 200 to 3000 RPM Orbit 3 mm) Operating Mode Touch or (more) Continous Features - Advanced Q-Drive for smooth, instant vortexing. - Maximum vortex action, minimal noise/vibration. - "No-walk" suction feet, spill-proof controls. - Speed range: 200 to 3,200 RPM, 3mm orbit. - Dimensions: 5 x 6.3 x 6.7 inches (13 x 16 x 17 cm). Your browser does not support the video tag. The BenchMixer sets the new standard in vortex mixing. With advanced Q-Drive technology, the BenchMixer provides smooth instant vortexing of even the largest sample sizes, including full 50ml tubes. The unique counter-balance system creates maximum vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation. Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls.INCLUDED: The Benchmark BenchMixer Vortexer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BenchMixer XLQ QuEChERS Shaker/VortexerBenchmark’s BenchMixer XLQ has been designed for us (more)e in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications. Multiple samples can be processed simultaneously in the Benchmixer XLQ’s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches. The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisley controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor. Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours. INCLUDED: The Benchmark BenchMixer XLQ QuEChERS Shaker/Vortexer includes: - 7 x 50ml Hortizontal Tube Rack - 50x15ml and 50x1.5/2.0ml Tube Rack - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Kern PCB 250-3 Balance. The unit is in full working condition and is ready fo (more)r immediate release. The Kern PCB 250-3 is a Precision Laboratory Balance that is highly accurate, fully programmable and comes with a range of advanced features for precise record keeping and weighing. The balance is suitable for weighing and counting even the smallest parts. The balance is supplied with an 81mm weighing plate. A built-in recipe function makes determining the exact measurements of a mixture as easy as possible. This mode will allow you to weigh the specific parts of a mixture, record each value and recall your measurements afterwards for reference. Pre-tare function - manually subtracts known container weights Fully programmable - configure the balance to measure in special units such as length of thread g/m, paper weight g/m² or similar Percentage determination - store a given weight value (100%) and determine deviations from the target value CAL EXT function - adjust the balance's accuracy with an external adjustment weight RS232 interface - allows the balance to interface with a PC or printer GLP/ISO record keeping of weighing data with date, time and identification number Dedicated Recipe function logs the weight of a tare container plus the recipe's ingredients % Determination mode - calculates % deviations from a target value (100%) Vibration-free weighing - filters out vibrations to maintain stable weight results Supplied with a weighing range of 250g Manufacturer's part: Kern PCB 250-3

Ohaus SHHD1619AL Heavy Duty ShakerThe OhausSHHD1619AL 16 kg Capacity Analog Heavy Duty Orbital Shake (more)r is designed for awide range of applications that require basic shaking control. Shaker providesreproducible motion that is evenly distributed throughout the entire surface ofthe tray. With loadcapacities from 35 lbs and over 70 accessory options and with microprocessorcontrol to provide variable speed and consistent shaking, while ramping to theset speed. Microprocessor displays the last set-point and will restart if poweris interrupted. Built-in tray and non-slip rubber mat included with theSHHD1619AL. Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases the speed to desired setpoint to avoid splashing. Theload sensor detects unbalanced conditions and automatically reduces rpm to asafe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD1619AL Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus SHHD1619AL Heavy Duty Shaker Specifications Speed Range25 to 500 rpmTimer1 minute to 120 minutesOrbit19 mm (0.75")Maximum Weight Capacity35 lbs (16 kg)Tray MaterialAluminumTray Dimensions (L × W)11 × 13" (27.9 × 33 cm)Overall Dimensions (L × W × H)16.3 × 14.0 × 5.9" (41.3 × 35.5 × 14.9 cm)Ship Weight49 lbs (22.2 kg)ControlAnalogPower120V, 5A, 50/60 HzPower Consumption75 WSafety CertificationTUVWorking Environment32° F - 104° F, 80%RH, non-condensing (0° C - 40° C, 80%RH, non-condensing)CalibrationSpeed calibrationDrive SystemBrushless DC Motor;Triple EccentricSpeed Accuracy±1 rpm, Above 100 rpm ±1% of set speedComparison of ModelsSpecificationOhaus SHHD1619ALOhaus SHHD1619DGOhaus SHHD2325ALOhaus SHHD2325DGOhaus SHHD4525DGOhaus SHHD4550DGOhaus SHHD6825DGOhaus SHHD6850DGSpeed Range (rpm)25 to 50015 to 50025 to 50025 to 50015 to 50015 to 30015 to 50015 to 300Timer (Minutes)1 to 1201 to 160 hours1 to 1201 to 1201 to 160 hours1 to 160 hours1 to 160 hours1 to 160 hoursOrbit (mm)19 (0.75")19 (0.75")25 (1")25 (1")25 (1")51 (2")25 (1")51 (2")Maximum Weight Capacity (lbs/kg)35 lbs (16 kg)35 lbs (16 kg)50 lbs (22.7 kg)50 lbs (22.7 kg)100 lbs (45.4 kg)100 lbs (45.4 kg)150 lbs (68 kg)150 lbs (68 kg)Tray Dimensions (L x W)11 x 13"11 x 13"18 x 24"18 x 24"24 x 24"24 x 24"24 x 36"24 x 36"ControlAnalogDigitalAnalogDigitalDigitalDigitalDigitalDigitalPower120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 Hz120V, 5A, 50/60 HzPower Consumption (W)7575757580808080.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Stainless steel storage vessel equipped with a gooseneck supply, vacuum hose for connection to an ex (more)ternal vacuum pump (not included) and drain valve on the bottom. Capacity about 60 L

MORE DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW