Panlab Harvard Apparatus Treadmill Control Module Unit + Air Puff

Millipore Milliflex PLUS Pump MXP PUMP 03 Model : MXP PLUS 03 With 3 Microwire Adapter 3 Filtration (more)s Pumps (Milliflex Plus) 3 x 24W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-27385 2 x Boxes of Long GlasswareITEM-27382 Black Container of mixed glasswareITEM-27383 Box of Mixed Small GlasswareITEM-26089 Incubator TraysITEM-40020 Unnamed Microplate Reader parts Spares/RepairsITEM-26088 Incubator TraysITEM-26087 Incubator TraysITEM-26086 Incubator TraysITEM-26090 Freezer rackingITEM-28308 Electrothermal Heating MantleITEM-28321 High pressure arc lampITEM-28311 Grant WaterbathITEM-28316 Biodine Fractional Horsepower GearmotorITEM-28312 Unknown plastic componentsITEM-28314 Mixed lab accessoriesITEM-28315 IKA-Werke Type: VX2ITEM-28313 Mass spectrophotometer tubesITEM-28320 Corning Incubator/OvenITEM-28317 Edwards Thermocouple 507ITEM-28309 Oertling GC121/00ITEM-28318 Medexxa HTC100ITEM-28303 Millipore Masterflex PumpITEM-28304 UVP Mineral LightITEM-28310 Unknown Metal ComponentsITEM-28305 FisherBrand PF-1502ITEM-28299 Bio-Rad Sub-Cell Model 192ITEM-30030 Brunel MicroscopeITEM-30036 Leybold Didactic MicroscopeITEM-30033 Motic MicroscopeITEM-27884 Vickers Instruments MicroscopeITEM-26017 IBM ThinkPad Docking StationITEM-05099 opticon bar code readerITEM-26082 Random PartsITEM-26079 Box of cables and pump partsITEM-25523 Grant Water BathITEM-13323 Smart Wireless U-RX UHF Radio Mic ReceiveR AV EquipemntITEM-27885 Vickers Instruments MicroscopeITEM-27886 Vickers Instruments MicroscopeITEM-27887 Vickers Instruments MicroscopeITEM-27888 Vickers Instruments MicroscopeITEM-27889 Vickers Instruments MicroscopeITEM-27904 Vickers Instruments MicroscopeITEM-27891 Vickers Instruments MicroscopeITEM-27905 Vickers Instruments MicroscopeITEM-27892 Vickers Instruments MicroscopeITEM-27893 Vickers Instruments MicroscopeITEM-27898 Vickers Instruments MicroscopeITEM-27895 Vickers Instruments MicroscopeITEM-26025 Kramer Tools VP-211 Automatic VGA/Audio SwitcherITEM-04659 Panasonic Telephone

Assorted Millipore, Mobius & Thermo Scientific Polythene Drums & Trolleys These were removed (more) from a working lab where they were surplus to requirements. Included are; Mobius Polyethylene Drum 180L x 1 1 HoleSerial#: N/A Millipore Polyethylene Drum 200L x 1 1 HoleSerial#: N/A Thermo Scientific Polythene Drum 100L x 1No HoleSerial#: 11100-0030 Unbranded Polythene Drum 100L x 1No HoleSerial#: N/A Mobius Polythene Drum 100L x 11 HoleSerial#: N/A Millipore Polythene Drum 100L x 1 1 HoleSerial#: N/A Nalgene Polythene Drum 55L x 2No HoleSerial#: 11100-0015 Nalgene Polythene Drum 18L x 2No HoleSerial#: 11100-0005 Unbranded Polythene Drum 15L x 1 2 HolesSerial#: N/A All drums are in good cosmetic damage with minimal wear and no damage. Drum Dolly 65cm x 2 Drum Dolly 54cm x 1 Drum Dolly 47cm x 1 Drum Lid 65cm x 2 Drum Lid 50cm x 2 Drum Lid 39cm x 1 Drum Lid 36cm x 1 Drum Lid 33cm x 1

Benchmark BeadBlaster 96 Ball Mill Homogenizer, 120V The BeadBlaster™ 96 is an extremely versatile b (more)ead mill homogenizerthat has applications in a variety of areas, including biologicalresearch, environmental testing, and industrial settings. Adaptersare available for microplates, microtubes, and 50ml tubes. Grinding jars and balls in a variety of materials are available.Wet homogenization, dry grinding and cryogrinding can allbe performed with the BeadBlaster™ 96. The arced motion ofthe sample holders and powerful motor allow most samples tobe processed in 1 minute or less. All parameters are digitallycontrolled through the large touch screen and 9 programs can bestored in memory.The safety cover lifts up for easy access to the sample holders andautomatically locks during operation. The wrap-around design ofthe clear acrylic lid allows for visualization during homogenization. Click Here to View Product Video INCLUDED: The BeadBlaster 96 Ball Mill Homogenizer, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Speed: 100 to 14680 rpm (50 rpm increments) RCF: 1 to 20238 x g (50 x g increments) Run time: 30s to (more) 9:59 h, infinitely (0.5 min increments up to 10 min, thereafter in 1 min increments) Dimensions (WxDxH): 236 x 320 x 227 mm Weight: 13.4 kg Equipped with: 1x Eppendorf FA-45-24-11 biocontainment lid 1x Eppendorf FA-45-24-11 fixed angle rotor (max 15000 rpm; 24x 1.5 mL/2.0 mL micro test tube capacity)

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up, but the display screen is faulty, therefore we were unable to test further. It is in reasonably good cosmetic condition, with marks from use. It is listed as Spares/Repairs. Includes the following: SIGMA 11133 Swinging Bucket Rotor w / 2 x BucketsBucket capacity: 4 x 550 ml

This Statebourne biostor 5 Liquid Nitrogen Cryogenic Storage Tank/Dewar was removed from a universit (more)y lab where it was surplus to requirements. The unit is in good cosmetic condition but as it is a used item it will have some scrapes and marks from use. It comes with a set of 6 storage racks and a trolley. It has not been tested.

DakoCytomation Diode Lyt 200-S Laser Head w/ Controller & Fan/Cooler This was removed from a wo (more)rking MoFlo system. It was surplus to requirements. The unit powers up but has not been tested further due to safety restrictions around lasers at our site. It is in good cosmetic condition with minor marks.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

IKA MultiDrive control Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing range 5 -  (more)4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. MultiDrive control mixes, grinds and is also fitted with a dispersion vessel and a disposable tube. There is a USB interface available for easy actuation and documentation respectively. High performance Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval operation The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling A cooling system is integrated in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display A clear TFT-display guarantees user-friendly operation. Temperature measurement MultiDrive control offers temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function The weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required. Variety of vessels (accessory) MultiDrive provides the right vessel for each grinding task. Vessels don't belong to the scope of delivery.INCLUDED: The IKA MultiDrive control includes: - IKA MultiDrive control - Socket wrench - Disassembly tool 1 - Disassembly tool 2 - Cleaning brush - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty