Leitz 20945 seltenes antikes rare antique Schraubenmikrotom

*No weight set on template* Sorvall Porter-Blum Ultra Microtome MT-2 Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and fully functional. Also includes: 1 x Pivoting Microscope Arm1 x Telescopic Locking Screw1 x Telescopic Arm1 x Microscope Locking Screw 2 x Microscope Holder & Stereo Microscope

Leica Reichert Ultracut E Microtome This was removed from a university lab where it was surplus to  (more)requirements. The unit was tested with a controller from another unit (not included), but was found to power up and operate correctly. It is in good cosmetic condition with minor marks Head - Reichert Stereo Star Zoom0.7X to 3.0X 5692 x Eye pieces - 15X W.F 184

This Bright Microtome Model M3500 was removed from a university lab where it was surplus to requirem (more)ents. The unit powers on and is in good cosmetic condition. it requires 2 x AA batteries to operate (not included). There are some tape marks on the unit from general use the battery compartment had signs of corrosion but we have cleaned this up, but some signs remain. It doesn't affect the operation of the unit. All dials and buttons appear to be responsive to the unit and move freely.

Bright Refrigerated Cryostat Microtome OTF/AS This was removed from a university lab where it was su (more)rplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

Leica Reichert Ultracut S Ultramicrotome and Controller This was removed from a university lab where (more) it was surplus to requirements. The units all power up and the microtome is mechanically sounds, but only the top light is working. It is in good cosmetic condition with minor marks. Leica Reichert Ultracut S UltramicrotomeModel: Ultracut S Ultramicrotome 702501Serial#: 420626 2x Eyepieces:Cambridge instrumentsPart#: 31-05-62 Leica Reichert AG Control PanelModel: 654901Serial#: 89378

CS 60 BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extracto (more)r cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Sanyo Ultra Low Temperature Freezer MDF-U3086SBT ULT This was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). The door seals were examined and found to be in poor condition, torn in places and need replaced. For this reason it is sold for spares/repairs. It is in good cosmetic condition both internally and externally. Equipped with a liquid CO2 backup system, this was not testedInner dimensions 51 x 50 x 112cm (w x d x h)

This CTC Analytics Leap HTC PAL Autosampler Heating and Cooling HPLC was removed from a university l (more)ab where it was surplus to requirements. All units are in good cosmetic condition and powered up. The CTC Analytics Leap HTC PAL Autosampler was tested with a digital thermometer (not included). We are unable to test further at our facility. Autosampler consists of: CTC Analytics main unit MXY 01-01BSerial No. 113351 CTC Analytics Injector Column MZ01-00DSerial No. 1284 2 x CTC Analytics Pumps MZ01-00DSerial Nos. 3022, 3216 Supercool Box27 sample tray heating and cooling 3 x drawers 20cm x 12cmSerial No. CCO-00103 CCT Analytics Peltier Thermostat unit MN 03-02 CCT Analytics Power Supply MN01-00 CCT Control Pad and Screen MB 01-00A Needle wash unit Included:4 x power leads1 x data cableSolvent shelf with 1 litre glass Scott Duran bottle

Memmert IF750 Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 749 L (26.5 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF750 Forced Circulation Incubator 749L, 115V offers an expansive 749 L (26.5 cu.ft.) volume, making it an excellent choice for large-scale laboratory operations. Its setting temperature range spans from +20°C to +80°C, with a working range starting at Min. 10°C above ambient. The incubator features a robust ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display, allowing for precise control over key parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time. Its easy-to-clean stainless steel interior is reinforced with deep drawn ribbing and integrated heating on four sides, ensuring durability and optimal heat distribution. Designed for safety and efficiency, the IF750 includes an adjustable overtemperature monitor and mechanical temperature limiter TB, in compliance with DIN 12880 standards. The forced air circulation system, driven by a quiet air turbine, is adjustable in 10% increments, ensuring even airflow and precise temperature control. With space for up to 14 shelves and a maximum chamber load of 661 lbs, this incubator is suitable for high-capacity workloads. Additional features like AtmoCONTROL software, a fully insulated stainless steel door with inner glass, and autodiagnostic systems make the IF750 a powerful tool for any lab environment. INCLUDED: The Memmert IF750 Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Varied Standards: The set consists of 12 wire standards and 16 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 2 brushes and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are wires. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.