Edwards ELD500 FLEX, 100-240V, 50/60Hz Helium Leak Detector

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items:1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x 1/4" straight connector1 x USB cable1 x hard carry case

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - MOBILE SOLUTION - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 200-240V 50/60Hz EU Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY - 200-240V 50/60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement <5x10-12 mbar ls-1 Inlet Connection NW25 Helium Pumping Speed 3.1 ls-1 Fe (more)atures - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Edwards D13550300 ELD500 SL Standard Sniffer Line, 4 Meters Length 4 Meters Gas Throughput 15 to 25  (more)sccm For Use With ELD500 Leak Detectors Features - Designed for use with ELD500 leak detectors to locate gas leaks on test objects - Effective sniffer line length of 4 meters for extensive reach - Gas throughput ranging between 15 to 25 sccm for optimal performance - Features red and green LED indicators for real-time leak rate status - Simple setup by connecting to leak detector’s inlet port and "OPTION" input The Edwards D13550300 ELD500 SL Standard Sniffer Line, 4 Meters is designed for pinpointing gas leaks on various test objects when used alongside ELD500 leak detectors. This product features a KF25 flange for vacuum connection and an 8-pin plug for electrical connections, ensuring easy integration with your existing systems. The sniffer line supports a gas throughput of 15 to 25 sccm, optimizing performance and accuracy in leak detection tasks. Notably, it includes visual indicators with a red LED to signal when the leak rate exceeds Trigger 1 threshold and a green LED to indicate when it falls below, providing clear, immediate feedback during operations. To set up, simply connect the sniffer line's KF25 flange to the ELD500 leak detector’s inlet port and the 8-pin plug to the detector's "OPTION" input for seamless functionality. INCLUDED: The Edwards D13550300 ELD500 Sniffer Line includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Crest P360D/HF-132 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transd (more)ucer technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance. All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level. Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more. The Crest P360D/HF-132Ultrasonic Cleaner with Power Control combines advanced technology with user-friendly features, making it an essential tool for precision cleaning applications. Featuring ceramically enhanced transducer technology and homogenous sound field distribution, it operates at a frequency of 132 kHz, ensuring thorough cleaning and enhanced sample preparation capabilities. With adjustable cleaning time and bath temperature ranging from 20°C to 80°C, it offers versatility for various cleaning needs. The "D" models include nine-step ultrasonic power adjustment and a Degas function, optimizing cleaning performance. Its deep-drawn stainless-steel tank with rounded corners facilitates easy cleaning, while an intrinsically safe heater with dry-run protection ensures safe operation. Ideal for removing flux from PCBs, oils, paints, and other contaminants, the Crest P360D/HF-132 guarantees reliable performance backed by a 2-year manufacturer's warranty.INCLUDED: The Crest P360D/HF-132 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Ohaus ISHD23CDG - Incubating and Cooling Heavy Duty Orbital Shaker Discover a revolution in shaking  (more)and incubation with the Ohaus ISHD23CDG - Incubating and Cooling Heavy Duty Orbital Shaker. Expertly crafted with a 25mm orbital motion and a highly durable design, this benchtop model is poised to enhance your laboratory's efficiency and precision.Key Specifications: - Motion: Features an orbital motion of 25mm, providing thorough and gentle mixing of lab samples. - Capacity: Exceptionally robust, supporting up to 50 lb (22.7kg) @ 125 rpm, and 10 lb (4.53kg) @ 500 rpm. - Temperature Range: Uncompromising in its ability to adapt, with a range of 15°C below ambient to 65°C. - Temperature Calibration: For ensuring accurate and reliable temperature readings. - Overload Protection: Prevents equipment damage and enhances user safety. Unique Features: - Opti-Flow Forced Ventilation System: Our exclusive system utilizes twin induction or a single large fan. By deflecting air around, not directly onto samples, a circular flow of air is created to ensure temperature uniformity. - Accu-Drive Shaking System: Delivering repeatable results, our exclusive system ensures speed accuracy, while the Triple Eccentric Drive provides consistent shaking motion throughout the entire speed range. - Spacious Chambers: The chambers for the ISHD23HDG and ISHD23CDG units are sufficiently large to accommodate 2 x 6L Erlenmeyer flasks, with optional clamps and platform. Incorporate the Ohaus ISHD23CDG - Incubating and Cooling Heavy Duty Orbital Shaker into your lab today, and witness first-hand the space-saving convenience and outstanding performance they deliver. This benchtop unit promises temperature uniformity and a diverse range of shaking and incubating applications, making it an invaluable asset for your research needs.INCLUDED: The Ohaus ISHD23CDG - Incubating and Cooling Heavy Duty Orbital Shaker includes: - Power Cord - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The table has been designed to eliminate ground vibrations during the operation of laboratory equipm (more)ent such as microbalances, analytical balances and others. The working part consists of a table and a stone separated by a vibration damper. The table is equipped with adjustable feet with rubber tips, facilitating table levelling on uneven surfaces. Stability and vibration damping properties, resulting from the significant weight, are the main advantages of the table. The large surface of the tabletop makes it possible to place several balances on it. The structure of the table is made of stainless steel.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW