Edwards ELD500 DRY - 200-240V 50/60Hz Helium Leak Detector

ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to test it further at our facility. Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Tenenergy 10,000 mAh NiMH rechargeable battery1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x 1/4" straight connector1 x USB cable1 x hard carry case

Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector Max. Measurement <5x10-12 mbar ls-1 Inlet  (more)Connection NW25 Helium Pumping Speed 3.1 ls-1 Features - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.The ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY - 200-240V 50/60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - MOBILE SOLUTION - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY, 100-120V, 60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Edwards D13550300 ELD500 SL Standard Sniffer Line, 4 Meters Length 4 Meters Gas Throughput 15 to 25  (more)sccm For Use With ELD500 Leak Detectors Features - Designed for use with ELD500 leak detectors to locate gas leaks on test objects - Effective sniffer line length of 4 meters for extensive reach - Gas throughput ranging between 15 to 25 sccm for optimal performance - Features red and green LED indicators for real-time leak rate status - Simple setup by connecting to leak detector’s inlet port and "OPTION" input The Edwards D13550300 ELD500 SL Standard Sniffer Line, 4 Meters is designed for pinpointing gas leaks on various test objects when used alongside ELD500 leak detectors. This product features a KF25 flange for vacuum connection and an 8-pin plug for electrical connections, ensuring easy integration with your existing systems. The sniffer line supports a gas throughput of 15 to 25 sccm, optimizing performance and accuracy in leak detection tasks. Notably, it includes visual indicators with a red LED to signal when the leak rate exceeds Trigger 1 threshold and a green LED to indicate when it falls below, providing clear, immediate feedback during operations. To set up, simply connect the sniffer line's KF25 flange to the ELD500 leak detector’s inlet port and the 8-pin plug to the detector's "OPTION" input for seamless functionality. INCLUDED: The Edwards D13550300 ELD500 Sniffer Line includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Waters Acquity UPLC H07UPT, H07UPA, H07UPB & F07UPH System This item was removed from a univers (more)ity where it was surplus to requirement. All included units are in good cosmetic condition and power on independently, we are unable to test them further as a system at our facility. This system comprises the following: 1 x Waters Acquity TUV Detector- H07UPT1 x Waters Acquity Sample Manager- H07UPA1 x Waters Acquity Binary Solvent Manager-H07UPB1 x Waters Acquity Ethernet Box -F07UPH

IKA Matrix Orbital Delta F0.5 Thermoshaker Speed Range 0 - 2000 rpm Time Setting Max. 6000 min Hea (more)t Output 100 Watts Features - Large and clear display with a convenient menu structure allows for intuitive operation - Speeds of up to 2,000 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively - Two different speed modes for gentle heating of the samples - Programmable ramps allow for automatic execution of mixing and heating tasks - Smart speed adjustment according to insert, attachment and filling volume - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness The IKA Matrix Orbital Δ F0.5 is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ F0.5 mixes and heats with a fixed insert for 24 x 0.5 ml tubes. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result. In addition, IKA Matrix Orbital Δ F0.5 comes with numerous user-friendly features: Click Here to View Product Video INCLUDED: The IKA Matrix Orbital Delta F0.5 Thermoshaker includes: - MATRIX Orbital Delta F0.5 - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Orbital Delta F0.5 Thermoshaker Specifications Type of movementorbitalShaking stroke3 mmMaximun load0.3 kgPermissible ON time100 %Speed min (adjustable)300 rpmSpeed range0 - 2000 rpmSpeed displayTFTSpeed deviation30 ±rpmSpeed control 10 RPM StepsTimer yesTimer display TFTTime setting min.1 sTime setting max.6000 minOperating modetimer, continuous and program operationHeating temperature rangeroom temp. +4° - 100 °CHeat output100 WHeat controlTFTSet temperature resolution1 ±°CTemperature control accuracy0.5 ±°CTemperature stability0.5 °CTemperature homogenity0.5 (@ 20°C ... 45°C); 1.5 ±°CHeating rate15 °C/minTemperature displayyesNumber of reaction vessels24x 0.5 mlDimensions (W x H x D)216 x 149 x 351 mmWeight9.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input240 WPower input max.240 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Heidolph Outlet instrument*. 12 months warranty. *Heidolph Outlet instrument can be overstocked item (more), returns, demo instrument etc. They are checked by Heidolph and in a 100% functional condition. Profit from great savings thanks to slight optical defects. Can be used with Heidolph rotational evaporators Hei-VAP Expert Control / Hei-VAP Ultimate Control Features: - Even if the gas ballast valve is open an excellent ultimate vacuum is reached when working with easily condensable vapors. - Distilling high boiling point solvents such as DMF or DMS at low bath temperatures possible. Technical Data:

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] 0.1 μg for loads ranging from 2 g to 50 kg.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Shaker microplate MX100-4A. Ideal for agitation of plates in ELISA. Agitation for 4 microplates. Va (more)riable speed from 200 to 1500 rpm. Timer from 1 min to 99h59min. Resolution: increments of 10 rpm. Brushless Motor. Orbit 3 mm optional Rack for 20 tubes of 1.5 or 0.5 mL.