Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items:1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting1 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

Edwards D13550300 ELD500 SL Standard Sniffer Line, 4 Meters Length 4 Meters Gas Throughput 15 to 25  (more)sccm For Use With ELD500 Leak Detectors Features - Designed for use with ELD500 leak detectors to locate gas leaks on test objects - Effective sniffer line length of 4 meters for extensive reach - Gas throughput ranging between 15 to 25 sccm for optimal performance - Features red and green LED indicators for real-time leak rate status - Simple setup by connecting to leak detector’s inlet port and "OPTION" input The Edwards D13550300 ELD500 SL Standard Sniffer Line, 4 Meters is designed for pinpointing gas leaks on various test objects when used alongside ELD500 leak detectors. This product features a KF25 flange for vacuum connection and an 8-pin plug for electrical connections, ensuring easy integration with your existing systems. The sniffer line supports a gas throughput of 15 to 25 sccm, optimizing performance and accuracy in leak detection tasks. Notably, it includes visual indicators with a red LED to signal when the leak rate exceeds Trigger 1 threshold and a green LED to indicate when it falls below, providing clear, immediate feedback during operations. To set up, simply connect the sniffer line's KF25 flange to the ELD500 leak detector’s inlet port and the 8-pin plug to the detector's "OPTION" input for seamless functionality. INCLUDED: The Edwards D13550300 ELD500 Sniffer Line includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

ELD500 Max. Measurement <5x10-12 mbar ls-1 Inlet Connection NW25 Helium Pumping Speed 3.1 ls-1 Fe (more)atures - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - MOBILE SOLUTION - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY, 100-120V, 60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector Max. Measurement <5x10-12 mbar ls-1 Inlet  (more)Connection NW25 Helium Pumping Speed 3.1 ls-1 Features - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.The ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Application: Automatic mass comparator AK-4/100 series is intended to automatic determination of wei (more)ghts mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/100 is designed to compare weights from 10 g to 100 g. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 500 mg Material: nickel silver M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

Ohaus HB4AL Analog Dry Block Heater, 4 Block Temperature Range Low: Ambient +5°C to 100°C / High: 75 (more)°C to 150°C Control Analog Uniformity Within the Block ± 0.1°C at 37°C Features - Supports four interchangeable modular blocks with over 40 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Features dual temperature adjustment knobs with dial markings for precise control - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB4AL Analog Dry Block Heater offers exceptional temperature stability, making it perfect for various applications that demand consistent heating. This heater accommodates four interchangeable modular blocks, providing over 40 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB4AL features a robust painted steel housing and is equipped with dual analog temperature adjustment knobs, making it an economical yet reliable choice for any laboratory setting.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB4AL Analog Dry Block Heater, 4 Block includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISLDMPHDGL Incubating Shaker The Ohaus ISLDMPHDGL Incubating Light Duty Shaker with Opaque Lid (more) is designed to incubate samples from 5° ambient to 65° C depending on the model are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLD04HDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks and comes with an opaque lid for light sensitive samples. The ISLDMPHDGL features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload.INCLUDED: The Ohaus ISLDMPHDGL Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISLDMPHDGL Incubating Shaker Specifications Temperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Pumpdrive model 7544-20 (speed 20 rpm) Housing material: Polysulfone Rotor material: Cold-rolled ste (more)el Rollers: Three; cold-rolled steel Occlusion: Average, fixed mL/rev: Depends on tubing selected Accepted tubing: L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, L/S 18 Min flow rate: 0.06 mL/min (at 1 rpm with L/S 13 tubing) Max flow rate: 2300 mL/min (at 600 rpm with L/S 18 tubing)

Equipped with a rotating barrel with external gas connection. Temperature range: 15°C – 45°C Humidit (more)y range: 0 – 98% rH Diameter barrel: 375 mm Dimensions (HxWxD): 2135 x 1380 x 1080 mm Internal dimensions (HxWxD): 790 x 800 x 725 mm