Elforlight Class FQS-100-1-Y-355 3B Laser w/ Supply Lab

Wild Heerbrugg LNA 2l Rotating Laser Level Lab This item was removed from a university where it (more) was surplus to requirement. It is in very good cosmetic condition, it has not been powered on or tested further. Additionally, includes a Handheld LPD2 control and the original carry case.

Leica AODS 20200-8 Laser Modulator Lab This item was removed from a university where it was surplus  (more)to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Power supply not included.

Gartner Scientific Corporation L117 Ellipsometer This item was removed from a university lab where i (more)t was surplus to requirements. The ellipsometer is in fair cosmetic condition, with some wear consistent with its age. The device includes a Class 3 laser product and, for safety reasons, it was not powered on. One of the axis arms for moving the stage is broken. Includes:- On/off key Specifications:Model: L117Serial No.: 449-AKLaser Model: 7222H-PCLaser Serial No.: 1310241

This was removed from a university lab where it was surplus to requirements. The system powers up bu (more)t was not tested further for safety reasons, and a laser policy at our site. It is in great cosmetic condition. Driver serial No. 102200510ADRModel Ad-2200 Laser Module serial No. 102200510Central wavelength 593nmOptical output power 50nWFB-593-050-FS-FS-0-1-ST on data plate

This High-Q femtoREGEN Class 4 Laser was removed from a university lab where it was surplus to requi (more)rements. The unit is untested and was marked as faulty by the lab. An engineer inspected it, and they identified the optics, Second harmonic and third harmonic crystals were in good order. They were unable to test it further without the water circulator, though they did mention it looked like someone had been inside the pocket cell in the past. The fault is unknown but could be something to do with the pocket cell. The system is comprised of; 1x High-Q femtoREGEN Laser:Model IC-1030-1000 Yb HR REG AMP SHG-THG Inside the unit:1x User Replaceable Diode Module (URDM #2506)The unit is in good cosmetic condition. 1x User Replaceable Diode Module (URDM 3W/5.14A/25C/976.2nmThe unit is in good cosmetic condition.

Epilog Legend 36EXT Laser With 2 x Laser Fume Extractors Lab This was removed from a university wher (more)e it was surplus to requirements. Epilog Laser - Legend 36EXTSerial Number: 9060-0813513624RManufacture Date: 2008 The machine is fully functional but requires a new laser tube. It is in good cosmetic ocdiiton with minor marks. Bofa Laser Fume Extractor - AD350Serial Number: AD350-02284 Identify Advantage Laser Fume Extraction - AD350Serial Number: 11/08/AD350-197 Both fume extraction units are in good cosmetic condition, but neither has been tested at our facility. Also included: 3 x Used Replacement Motors (Untested)1 x Laser Diode1 x Epilog Legend 36EXT Manual Due to the system requiring a new laser tube we are selling this as spares/repairs.

Lancer Ultima 1400 LX Labware Washer Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, but displays a 'Service warning.' It is overdue a service. The front right side leaks, likely due to a damaged door seal. It requires full service to address the warning and leak before use. Therefore, this unit is listed as Spares/Repair.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 500 g), plastic box Number of  (more)pieces in the set: 24 Weights 1 g i 2 g – solid masses without adjusting chamber

Tuttnauer 1730M Autoclave The Tuttnauer 1730M Autoclave is designed to compliment any healthcare fac (more)ility. The bright new easy-to-use panel was designed with the operator in mind. The 1730M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. INCLUDED: The Tuttnauer 1730M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Polyscience P60N2A101B IP-60 Immersion Probe Cooler, 1.5 Rigid Coil Probe, -60 to -20C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60N2A101B IP-60 Immersion Probe Cooler, -60°C to -20°C, 150W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-Blotter Orbital Shaker The Orbi-Blotter features a gentle orbital motion with speed c (more)ontrol down to as little as 3 rpm, making it the ideal orbital choice for low speed applications, such as blotting, washing, staining/destaining, etc. A large 14 x 12 in work surface is included along with a non-slip rubber mat for holding trays, dishes, plates and other flat vessels. An optional stacking platform can be purchased as an accessory, effectively doubling the usable work surface. The maintenance free, brushless motor is capable of loads up to 2 kg and is safe for use in cold rooms and incubators. INCLUDED: The Benchmark Orbi-Blotter Orbital Shaker includes: - 14 x 12 in Platform w/ Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty