Microflow Laminar Flow Workstation Model: 5054811 Lab

Perkin Elmer Janus Automated Workstation with Air Science Purair Advanced Ductless Fume Hood This sy (more)stem was removed from a university laboratory where it was surplus to requirements. It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below: The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. The X and Y rails, as well as the gripper Z worm drive, have been cleaned and lubricated. Tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place. There is no Software included with this system. The system is housed within an Air Science Purair Advanced Ductless Fume Hood, which powers on with both light and airflow functioning. Specifications: - Workstation Part No.: AJL8G01 - Workstation Serial No.: DG11118582 - Manufacture Date: November 2011 - Last Service: 06-12-2022 Fume Hood: - Model: Purair P30 - Serial No.: P90786 - Internal Dimensions: L173 W109 H116 cm - Last Service: 09/08/2022 Accessories: - Box of Plate Holders. - Various Cables. - 2 x Waste Bottles. - Waste Bin The system is in reasonable used cosmetic condition.

Horizontal laminar flow hood OPTIGEL 12 ADS LAMINAIRE Work in a sterile environment and Product Prot (more)ection - Complies with ISO Class 5 (ISO 14644 Standard) Useful dimensions (WxHxD): 1225 x 575/620 x 570 mm Overall dimensions (WxHxD): 1245 x 813 x 916 mm Flow rate (m3/h): 1000 Fan type: DF 280 ECM Absolute filter (on blowing): M14-612-250-A-P Prefilter: W0412202C Power supply: Mono 220 + T 16 A 50 Hz Power: 500 W Weight: Approximately 100 kg Lighting level 600 to 800 lux on the worktop Year of manufacture: 2022 Hour counter: 20000h Original filters

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labcaire HLF18 Laminar Flow Cabinet This was removed from a laboratory where it was surplus to requi (more)rements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Internal dimensions:Dx50 Wx183 Hx72cm

EPRUS VLF vertical laminar flow cabinet. G4 pre-filter and H14 absolute HEPA main filter (99.999% ef (more)ficiency). Intuitive four-language keyboard with LCD screen. Fan with air regulation from 10 to 100%. LED lighting. Programmable bactericidal UV lamp. Built-in plug. Easy maintenance, easy installation without tools. Work space dimensions: 975*400*600 mm. User manual. Optional: front panel. Attention: the price shown corresponds to the model without front panel, to find out the price of the model with front panel, use the dropdown below. The EPRUS VLF vertical laminar flow cabinet guarantees a completely sterile working environment. Provides protection to the product in pharmacies and in all types of laboratories. All hoods are equipped with a G4 air intake pre-filter and an H14 HEPA filter offering 99.999% efficiency. They have been designed for years of uninterrupted service and are built with the best materials available. The device can display menus and dialog text in four European languages. EPRUS VLF is extremely cost effective and very easy to install. See assambling instructions HERE

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R 120 FALC

Stanton Redcroft 1000ºc Tube Furance + Power Supply/Controller Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and in good working order.

Yamato LR-500BA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V Speed Range  (more) 100 to 1000 rpm Max Torque 0.98N•m (10kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 100~1000 rpm for medium viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load. Set includes stand, rod, stainless steel shaft and 75mm 4-blade propeller. INCLUDED: The Yamato LR-500BA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V includes: - Stirring shaft (ø10*500mm) - 75mm 4-blade propeller - clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic PA53MET-BD-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite (more) Objectives S-APO BD 5X, 10X, 20X, 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Achieve precise 3D measurements with advanced Z-axis profiling and Motic’s Analysis Software. - Enjoy crystal-clear images with advanced Semi-Apochromatic objectives. - Wide field of view with 25mm WF10X eyepieces, leading the industry standard. - Work with ease using a 20° inclined trinocular head. - Color Corrected Infinity Optical System (CCIS®) for superior clarity. - Versatile magnification options with 5X, 10X, 20X, and 50X objectives. - Advanced ergonomic design, compact size, carefully sourced high-quality materials, and versatile digital capabilities ensure minimal operator fatigue during extended periods of operation. The Motic PA53MET-BD-3D is a top-tier trinocular metallurgical microscope designed for bright field observation with a 100W halogen lamp and an advanced reflected frame for 3D profiling, featuring a motorized Z-axis, a 3D control box, and a control pad. It includes widefield eyepieces offering 10X magnification and a 25mm field of view. The microscope's coded quintuple revolving nosepiece supports BD and includes a DIC slot. Equipped with Plan S-APO BD objectives (5X, 10X, 20X, 50X), it’s optimized for industrial quality control and analysis of opaque materials. INCLUDED: The Motic PA53MET-BD-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite includes: - S-APO BD Objectives: 5X, 10X, 20X, & 50X - 10x/25mm Widefield Eyepiece - Moticam S6 - 0.5X X C-Mount Adapter - Motic Analysis Professional Software - Integrated ND6, ND25, and LB filters - 4x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty