Safety cabinet CS 60UB PVC CHEMISAFE

Under-bench cabinet depth 45cm - Length 102cm Laboratory cabinet Length: 102cm Depth: 45cm Height: 6 (more)7cm In melamine 2 doors On casters (hidden by the finishing profile) Average condition of the cabinet and worn casters some chips on the melamine, see photos

COMBISTORAGE CS260 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Entirely made of electro (more)galvanized AISI304 stainless steel with a thickness of 1 to 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Possibility of having a wardrobe with door or drawer according to the models - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Opening doors at an angle greater than 110° - Lock and key - Height-adjustable shelf in plastic-coated steel and stainless steel - Cabinet equipped with an integrated ventilation system with external connection or arranged for ventilation via a Ø 100 mm flange - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470-1, EN61010 and EN16121 standards - Certified fire resistant 90 minutes Supplied: - Acids/Bases: 1 plastic-coated steel shelf and 1 stainless steel shelf (max load 60 Kg uniformly distributed) - Flammable: 1 retention tank with painted steel grid Optional: - Ventilation and filter - Shelves - Timer - Visual and acoustic alarm system - Glide for moving wardrobes

Dimensions (WxDxH): 1200 x 900 x 30 mm

These were removed from a university lab where they were surplus to requirements. There are 6 units  (more)in total 50cm X 50cm X 21cm

Isolation Table - White Lab This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition, we are unable to test it further at our facility.

Foster + Freeman MVC3000 Fuming Cabinet This item was removed from a university lab where it was sur (more)plus to requirements. The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.Therefore, further testing could not be conducted. There is no filter fitted, the unit should work fine with one in. Specifications:- 1 Shelf: 74 x 58 cm - 2 Baskets: 57 x 30 x 15 cm - Underneath space: 75 x 64 x 32 cm Model: MVC3000Serial No: 3175

Labsystems Microplate Washer Autowash I Labsystems Cellwash 96 well microplate washer system complet (more)e with vacuum pump and bottles Semi-automatic system Labsystems Cellwash is designed for washing the contents of 96-well plates in a high-throughput manner, reducing the washing time of one plate to a few seconds.

Matrix Super Sealer for Plates, Blocks and Tubes This was removed from a university lab where it was (more) surplus to requirements. This item is in good cosmetic condition and powered on without issue. We are unable to test it further at our facility.

Agilent 8453 UV/VIS Spectrophotometer G1103A with Keypad G1819A This was removed from a university l (more)ab where it was surplus to requirements. Agilent 8453 UV/VIS SpectrophotometerProduct no. G1103ASN - CN22805053 Agilent KeypadProduct no. G1819ASN - CN90400453 The system powers up but we were unable to test it further at our facility. It is in reasonably good cosmetic condition with minor marks.

IKA C 200 Measuring range max. 40000 J Measuring time dynamic approx. 8 min Measuring time isoperibo (more)l approx. 17 min Features - Suitable for educational institutions and industrial laboratories - Manual handling for water and oxygen filling - Offers four working methods: isoperibolic, dynamic, manual, time controlled - Clear and easy-to-use display - User-friendly aftersales support - Automatic mode for ignition and gross calorific value calculation - Decomposition vessel compatible with combustible crucibles (accessory required) - Can control up to eight measuring cells with optional multiserial plug-in card (PCI 8.2) The C 200-System offers a space-saving and cost-effective solution for determining gross calorific values of liquid and solid samples. It meets rigorous validation standards and is suitable for educational institutions, industrial laboratories, and technical schools alike. With manual and automatic modes, clear display, and user-friendly software, it ensures accurate measurements and streamlined data management. Plus, its compatibility with various crucibles and optional multi-cell control capability make it a versatile choice for diverse laboratory needs.INCLUDED: The IKA C 200 includes: - C 200 - C 5010 Decomposition vessel, standard - C 248 Oxygen filling station - Ignition adapter - C 200.1 Measuring cup 2000 ml - Water emptying hose - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 6 x 7-17ml Adapters, Cat. # 022637584 New in box Eppendorf 6 x 7-17ml Adapters, Cat. # 022 (more)637584 for the A-4-44 rotor. This is a 2 piece set, and the adapters are new in their packaging. To be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 6 x 7-17ml Adapters, Cat. # 022637584 includes: - Full 6 Month Parts and Labor Warranty