CS60 CHEMICALS BASIC CHEMISAFE

CABINET CS 60 BASIC - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE P (more)01, thickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

COMBISTORAGE 120 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely ma (more)de of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 3 painted steel shelves + 1 retention tank with grid - COMPARTMENT FOR ACIDS: 2 plasticized steel shelves - COMPARTMENT FOR BASES: 2 stainless steel shelves - COMPARTMENT FOR TOXIC SUBSTANCES: 1 painted steel shelf (max load 60 kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

CABINET CS 120 BASIC - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE  (more)P01, thickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 80 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

This Fumecare DW5-90 Downflow Workstation was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and the airflow functions are in good working order. It is in good cosmetic condition with marks from use.

5 Level Shelf Ht 1750mm x P400mm CODIGEL Shelving Lot composed of: An in-line shelf: 2x856mm on 5 le (more)vels - L = 1682mm (CODIGEL reference: EA-0146) Very solid, durable and hygienic shelving with 15 micron anodized aluminum structure and high density polypropylene shelves They withstand temperatures from -30°C to +75°C, as well as distributed loads of 100kg/m or 120kg per shelf Adjustable feet New equipment in its original packaging

Lifting platform Rudolf Grauer Boy 110. Aluminum and stainless steel. Load max. 50 kg Size of platfo (more)rm-12x14 cm Lift style scissor. Control of manual adjustment. Specifications: Height of extension: 14 cm Height folded: 4 cm Ideal for use in fume-hoods fume, the media lab are lifting platforms ultra-stable able to hold a variety of items such as glassware, hot plates, baths and magnetic stirrers. The button adjustment allows height adjustment easy and precise. Constructed of aluminum and stainless steel and with a top plate 12x14 cm, With its system of lift-style scissor, this cat in the laboratory is able to withstand loads of up to approximately 50 kg It is recommended that the cat be lifted as close to the desired height as possible, before the weight is put on it and make final adjustments.

Stylcam 200R High Speed Rotary Press Simulator System w/ PC & Software Lab This system was remov (more)ed from a university where it was surplus to requirement. It is in good cosmetic condition with all units powered on, we are unable to test it further at our facility. This system includes a PC set-up with the following software installed: - Analis 2.01.16 Version This system cannot be exported and the eventual buyer will be subject to a disclaimer.

Eppendorf 180-250ml Adapters, Cat. # 022638441 The Eppendorf 180-250ml Adapters, Cat # 022638441 (fo (more)r 5810 / 5810R Centrifuges, A-4-462 Rotor) for rectangular 250ml buckets. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 180-250ml Adapters, Cat. # 022638441 includes: - Full 6 Month Parts and Labor Warranty

Ohaus STMP9DG Multi-Position Magnetic Stirrer, 120V Speed Range 60 to 1,400 RPM Maximum Capacity 9 x (more) 250ml Plate Construction Glass Filled Nylon Features - The 318 x 279 mm top plate accommodates up to 9x250 mL or 4 x 1 L flasks. The glass-filled nylon surface has a reflective white color, is chemical-resistant & minimizes unintended heating of samples. - Speed ramping feature slowly increases the motor speed for improved safety and enhanced coupling. Avoids splashing, improves spin bar control and provides excellent low-end speed control. - Digital models have touchpad controls for input of speed & time. Non-digital models have an adjustment knob with dial markings from 1-10. The microprocessor regulates adjustments throughout the range. The OHausSTMP9DG Multi-Position Magnetic Stirrer is a powerful nine position stirrer with a capacity of 250ml per position. With precise speed control, and repeatable performance, the STMP9DG ensures that its user's vital laboratory stirring tasks are accomplished with ease and accuracy. Its digital interface additionally provides complete control for end users. This product is designed for applications including dissolution studies, titrations, media preparation, and synchronized stirring of multiple samples. INCLUDED: The Ohaus STMP9DG Multi-Position Magnetic Stirrer, 120V includes: - 9 x Stir Bars - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.