Heizplatte Heizkessel Hotplate HotpotRK501.1 500W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A refrigerator combined with a precision freezer for the safe storage of samples in the scientific a (more)nd medical sector - Complete display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene cabinets injected with polyurethane foam that provides strong thermal insulation - Automatic internal LED lighting for lower energy consumption - Monobloc cabinet made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

The universally applicable lab oven U is Memmert’s classic appliance for temperature control in scie (more)nce, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology. Working temperature range: ambient +10 to 300°C Setting accuracy temperature: up to 99.9 °C: 0.1 / from 100 °C: 0.5 Setting temperature range: 20 to 300°C Fan: forced air circulation by quiet air turbine, adjustable in 10% steps Fresh air: Admixture of pre-heated fresh air by electronically adjustable air flap Vent: vent connection with restrictor flap Capacity: 108 L Max loading per shelf: 20 kg Max loading total: 175 kg Internal dimensions (WxHxD): 560 x 480 x 400 mm Dimensions (WxHxD): 745 x 864 x 584 mm Weight: 74 kg

IKA RC 2 Lite Recirculating Chiller Working Temp. -10°C to Room Temp. Pump Pressure Max. 0.35 bar Fl (more)ow Rate Max. 18 L/min Features - Perfect for cooling rotary evaporators, reflux condensers, and heat-exchange devices - Environmentally friendly design with natural refrigerant R290 - Illuminated sight glass for easy observation of filling levels - Large working volume of 2.5 L for extended applications without refilling - Easily accessible and cleanable stainless steel mesh filter for consistent cooling capacity - Simultaneous operation of multiple small applications supported by a pressure-/suction pump - Temperature stability of ±0.5 K with PID control for precision - Compact dimensions (8.86 x 15.1 x 16.9 in.) and low noise level of 51 dB(A) - Features RS 232 and USB-B interfaces for versatile connectivity - Electrical requirements: 115 V, 50/60 Hz, 250 W The RC 2 lite is the perfect peripheral device for the cooling of rotary evaporators, reflux condensers or as a cooling source for devices that dissipate heat with the help of a heat exchanger (e. g. double-walled grinding containers, cooled incubators, laboratory reactors, cooling coils).The easily accessible and easy-to-clean mesh filter (stainless steel) ensure a consistently high cooling capacity over years. Thanks to the low filling volume of just one liter, the RC 2 lite is able to reach low temperatures particularly fast. The large working volume of 2.5 liters enables a high number of external applications without refill of liquids. The filling level in the reservoir can be clearly observed through the large, illuminated sight glass. The powerful pressure and suction pump enables the simultanous operation of several small applications as well as external applications in open bath vessels in combination with a level controller. Thanks to the natural refrigerant R290, the RC 2 lite is remarkably environmentally friendly and well prepared for the future.INCLUDED: The IKA RC 2 Lite Recirculating Chiller includes: - 2 x Hose olives DN 8 - USB Cable - Hexagon Socket Offset by Screw Key - Warranty Card - Power Cord - Operator's Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

Planer Kryo 10 Series ii, MVE Lab 30, Controlled Rate Freezer System Lab This system was removed fro (more)m a university where it was surplus to requirement. All units are in reasonably good cosmetic condition. The Planer Kyro 10 Series ii Freezer & Planer Kyro 10 Series ii Biomed MR2 Printer both power on and pair successfully. The printer requires a Passcode which is available on request. We were unable to test the Planer LNP 4-C Freezer & Power Supply as the power supply cable is not included, therefore we are unable to confirm its working order. Also included are the following: 2 x washers for Paner FreezerSerial#: 24 707 2 x Spare paper for Planer Freezer Trolley stand with wheels

Memmert UN110PA Natural Convection Paraffin Oven 108L, 115V Setting Temperature Range +20°C to +80 (more)°C Setting Temperature Accuracy 0.1 °C Chamber Volume 108 L (3.8 cu. ft.) Features - Internal volume of 108 L (3.8 cu. ft.) - Temperature range from +20°C to +80°C, with working range at least 5°C above ambient - Precise temperature accuracy of 0.1 °C using dual Pt100 sensors - Control panel includes TwinDISPLAY with two high-definition TFT-color displays - Programmable with AtmoCONTROL software via USB or Ethernet interface - AutoSAFETY system with integrated over- and under-temperature monitor and alarm - Easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing and large-area heating on four sides - Maximum chamber load of 386 lbs. (175 kg) with five shelves The Memmert UN110PA Natural Convection Paraffin Oven 108L, 115V is crafted for precision in heating and reliability, ideal for laboratories requiring consistent temperature control for paraffin-based applications. With a spacious 108 L (3.8 cu. ft.) capacity, this oven provides ample room for versatile lab applications. Its advanced natural convection system delivers even heat distribution within a temperature range of +20°C to +80°C, and the dual Pt100 sensors in a 4-wire circuit offer an impressive 0.1°C temperature accuracy, ensuring reliable sample integrity and uniform heating across the chamber. This oven features Memmert's TwinDISPLAY control panel, equipped with two high-definition TFT color displays that allow users to easily monitor and adjust settings. AtmoCONTROL software provides additional functionality, enabling precise programming, management, and data transfer via USB or Ethernet. Integrated safety functions include AutoSAFETY, with over- and under-temperature monitoring, and visual and acoustic alarms, offering reliable performance and protection. The oven’s nearly gas-tight, stainless steel interior is reinforced and easy to clean, making it an efficient, durable choice for labs focused on maintaining high standards of accuracy and safety. INCLUDED: TheMemmert UN110PA Natural Convection Paraffin Oven 108L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

suitable for 15, 24, 35, 36 tubing

This Molecular Devices Skatron Embla Microplate Washer was removed from a university lab where it wa (more)s surplus to requirements. The unit is in reasonably good cosmetic condition with some marks from use. It powers up but we were unable to test it further at our facility.

This Sanyo Biomedical Laboratory Chest Freezer MDF-436 was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in good working order to -40˚C. It is in reasonably good cosmetic condition with marks from use. Internal dimensions - Depth 73cm L113.5 x W55.5cm

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 200 g), wooden box Number of pi (more)eces in the set: 11 weights 1 g i 2 g – solid masses without adjusting chamber

Gilson F171201 PIPETMAN DIAMOND Tips DL10ST, 0.1-20uL The Gilson F171201 PIPETMAN DIAMOND Tips DL10S (more)T, 0.1-20uL are designed to fit your PIPETMAN perfectly. They deliver accurate and precise pipetting when used in conjunction with Gilson pipettes. One commercial unit/quantity of the autoclavable TIPACK includes 10 racks of 96 tips (total of 960 already racked tips). These tips are fully autoclavable and color-coded for easy identification while being compliant with Good Laboratory Practice (GLP). Using PIPETMAN DIAMOND Tips with your PIPETMAN ensures maximum accuracy and precision and delivers consistent results. The perfect air-tight seal prevents leaks. The tips are made of pure polypropylene to deliver the correct volume and ensure complete dispensing. Volume graduations make it easy to visually check the volume aspirated. Gilson tips are manufactured in a clean room environment ensuring they are free of detectable contaminants that can affect your results. From mold to bench, our tips are guaranteed, certified, and traceable to meet the most stringent demands in many applications. Uniquely designed TIPACKS feature a dual-purpose lid: hinged to easily open and close while using tips; or simply pull it out of the hinges to set on top or discard for high-throughput tip usage. TIPACKS are compact, ergonomic, and eco-friendly. INCLUDED: The Gilson F171201 PIPETMAN DIAMOND Tips DL10ST, 0.1-20uL includes: - 10 Racks of 96 Non-Filtered Tips - 3 Year Manufacturer's Warranty