AREC 7 Hot Plate Magnetic Stirrer Velp

AREX 6 by Velp Scientifica The central button activates the heating of the plate only after pressing (more) it, avoiding involuntary switching on. The safety icon informs the operator that the plate is at temperature, preventing possible burns. It will remain illuminated until the temperature is below 50°C. The knobs allow precise speed and temperature regulation with new ergonomics and greater sensitivity. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX 6 is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX 6 is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Digital thermoregulation with VTF By connecting VTF digital thermoregulators, your AREX 6 transforms into a superior tool, with a built-in timer to schedule activities. The thermoregulator is ideal for multiple applications and meets the most demanding requirements in terms of precision, reliability and flexibility of use thanks to the innovative FUZZY LOGIC Technology. Automatically adapts thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows better alignment with the set temperature (with an accuracy of ± 0.5 °C.) and less initial 'overshoot' (initial discrepancy compared to the set temperature). Furthermore, VTF is equipped with a system to simplify installation on the support rod and facilitate positioning of the Pt100 probe in the most commonly used containers. The two clamps allow height adjustment while a sliding clamp allows horizontal adjustment. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-05085 Multi-PSU Blue Box *Unknown*ITEM-05176 NUNC Labtop Cooler Cat: 355501 (-20 C) Scientific LaboratoryITEM-05009 Oertling TP41 Top Pan Balance ScalesITEM-04968 Stanton D40T ScalesITEM-04596 Heraeus Instruments Biofuge Primo Centrifuge Damaged LidITEM-10422 Brava Juice BlenderITEM-05784 Techne Tecam TU-15 Tempunit Heater/CirculatorITEM-05138 Microscope Handle/StandITEM-03607 IKA Labortechnic hotplate and stirrer RCT Basic.ITEM-10939 Unknown Medical EquipmentITEM-05783 Grant Circulator Heater KA/TA for Laboratory Water BathITEM-12684 Luckham Orbital Platform Shaker Rocker Mixing LabITEM-14036 John Watts Type 586 Grinding Wheel Dressing ToolITEM-09555 Grant QBD2ITEM-02500 Digital Data Formatting 53-150ITEM-05479 Retro Smiths Manual TimerITEM-07327 Distron Geiger - Muller Counter TubeITEM-13055 Variomag Maxi Direct Magnetic Stirrer Lab Shaking EquipmentITEM-08581 Digitron Model 3750THITEM-14303 Ascom Digilarm Portable Digital Alarming BellITEM-14189 PIFCO Vintage Electric Body Massager Personal CareITEM-07161 Techne Dri-Block DB-3 Dry Block Heater Laboratory Lab - Spares RepairsITEM-10765 Drummond Pipet-Aid Dual Pump Filtration UnitITEM-14032 Eclipse PS51 Piercing Saw Fixed Frame Other ToolsITEM-09490 2 x IKA Big-squid Froggy stirrersITEM-13058 H.J.Latham Vintage Hair DryerITEM-11722 JK KMO2 Electronics Magnetic StirrerITEM-14312 Veho Discovery VMS-001 USB Microscope StandITEM-13134 Pipette StandITEM-12686 Grant Un-Stirred Water Bath Lab Heating EquipmentITEM-04976 Stovall Life Science Belly DancerITEM-11201 Barr & Stroud EL103 LF Power SupplyITEM-14009 Wooden BoxITEM-05088 PL4 Recorder JJ InstrumentsITEM-13622 1x Wesco Gren Oil Can 350cc Other Workshop EquipmentITEM-13993 Wooden BoxITEM-05222 Thermo Digital Series SpeedVac™ Systems Heat Laboratory Scientific *Lid Is BrokeITEM-11091 Denley Orbital Mixer Lab Stirring EquyipmentITEM-06569 Infrared Lamp Type HP3614ITEM-04321 fisherbrand stirrerITEM-11032 4x Rank Bros 100 Electronic Stirrer Control Lab Shaking EquipmentITEM-08321 Stuart Scientific SB1 Blood Tube RotatorITEM-11401 2x Anatune CF-100 Benchtop Laboratory Centrifuge Vortex RoboticITEM-10505 Race Pedal Joy Stick IT EquipmentITEM-04287 Job lot of 3 blood glucose monitoring systemITEM-08323 MULTI-JOB LOT 2 pipettesITEM-10657 Amazon.ca Salton Vacuum Bag SealerITEM-03116 Job Lot of 4 x Faulty H R Flow Inducer MHRE 4 and MHRE 100ITEM-06311 Corning PC-351 Hot Plate Stirrer Laboratory Heating Mixing - Spares RepairsITEM-11287 Harvard R150424 Thermo-Circulator ControllerITEM-05971 Mettler Toledo PL3000 Laboratory Precision Digital Balance ScalesITEM-10534 Fisher Scientific LABOSI Power 300 Electrophoresis Power SupplyITEM-06534 Hybaid PS 250 Electrophoresis Power SupplyITEM-06906 Ohaus Dial-O-Gram Balance 310g Capacity ScalesITEM-10259 Unbranded Vintage Weighing Pan BalanceITEM-02436 Selector Unit 1694 FITEM-12203 Electrothermal Cat. M106 Heating Mantle Lab Heating EquipmentITEM-06006 Developing Health Technology Portable Haemoglobin Analyzer DHT Hb 523ITEM-12290 Electrothermal EMO100 Heating Mantle Lab Heating EquipmetITEM-11905 Sarstedt M-Sarpette Manual Pipette With Gilson DistrimanITEM-12663 Single Stage BS5741 Single Gauge RegulatorITEM-06102 Thorn DFLD 400 LampITEM-12198 Electrothermal Heating Mantle Size 950ml Lab Heating EquipmentITEM-12205 Electrothermal EM2000/CE MK5 Heating Mantle Lab Heating EquipmentITEM-10537 Biolab pH & Conductivity Meter Lab EquipmentITEM-06045 Reliance Electric Gast Vacuum Pump - FaultyITEM-12155 GallenKamp HotPlate Magneic Stirrer Cat.SWT-315ITEM-09248 ChemLab SS3H Hotplate Laboratory Stirrer & Digitron Meter Spares RepairsITEM-12175 MK V Orbital Shaker [condition: Used]ITEM-04703 Mettler P1210 Laboratory Scale 1200G Max d=10mg Tara 0-100gITEM-07117 JJ Instruments Chard Recorder (Spares & Repairs)ITEM-06089 Stuart Scientific S.M.3 Magnetic Stirrer HotplateITEM-12168 Stuart Scientific Mini Orbital Shakers Lab Shaking EquipmentITEM-06017 Syringe PumpITEM-07133 Mettler Toledo pH Meter - Spares / RepairsITEM-10533 IKA Laboratories RH Basic Stirrer Lab Shaking EquipmentITEM-10698 Grant BT3 Block Heater Lab Heating EquipmentITEM-10746 Voss of Maldon MAG/S 200/250 Magnetic Stirrer Lab Shaking EquipmentITEM-10924 Fisher Brand Pump Lab Equipment (Spare Repairs)ITEM-06172 Elix 2 Millipore Water Purification SystemITEM-06046 VWR Digital ThermometerITEM-04758 Laboratory Glass Filter Tube

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370°C Low Profile, Attractive Design RC offers an innovative low profile and highly attractive design for greater user comfort. Even the inclination of the front panel has been carefully studied to facilitate its use. - Uniform heat distribution with coated aluminum alloy heating plate - Excellent chemical resistance - Maximum temperature 370°C - Accepts beakers up to 15 liters - Choice of mains voltage / frequency model - Control panel shielded against spills - Designed for maximum durability and backed by a 3-year warranty

Ceran hotplate with separate control 11 SR 500°C New equipment in its original packaging Reference:  (more)11 SR 500°C CERAN, an exceptional glass ceramic, is very resistant to breakage, temperature changes, deformation, UV permeable and very resistant to acids. The temperature is controlled by an electronic NiCr-Ni temperature controller (adjustment range 50...500°C), which is installed in a die-cast aluminum housing. Heating time up to 500°C in approximately 8 minutes. External dimensions (L x H x D) (Hot plates): 290 X 100 X 290 MM Weight (heating plates): 5.5 kg Plate shape: square Plate dimensions: 280 x 280 mm Height (heating plate): 100 mm100 mm Power (heating plate): 2000 W Material (plate): ceran Voltage/frequency (heating plates): 230 V AC Max temperature (hot dish): 500°C

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

This item has just arrived in our stock. Please enquire for further details.

Motic BA310 MET-H Trinocular Motic’s BA310MET series presents a powerful microscope line for inciden (more)t light applications in all material sciences. Industrial quality control of opaque samples can be performed as well as teaching in educational environments of engineering and material professions, where affordability and ease of use are key demands. Extended flexibility is given by the BA310MET-T models with built-in transmitted light for transparent or compound materials. The BA310MET-H includes a more flexible focusing device, dedicated to larger samples with little limitation in size. Motic's LM Plan-Achromatic objectives with Long-Working Distance for incident light provide optimal image contrast for reflective, non-covered specimen. Together with a fully corrected tube lens an intermediate image without colored fringes is created. In all models the Epi-Illuminator offers a powerful 50W Halogen light source. The built-in field diaphragm and aperture diaphragm help to optimize image quality by reducing stray light and thus increasing contrast.INCLUDED: The Motic BA310 MET-H Trinocular includes: - 5X/0.13 (WD 11.5mm) Objective - 10X/0.3 (WD 6.8mm) Objective - 20X/0.40 (WD 11.1mm) Objective - 50X/0.55 (WD 8.2mm) Objective - Widefield N-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Operator's Guide Motic BA310 MET-H Trinocular SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf typeInclination30° inclinedTrinocular light split100:0/20:80Interpupillary distance55-75mmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield N-WF10X/20mm with diopter adjustmentIntermediate bodyEpi-illuminator quartz halogen with integrated field and aperture diaphragms and external lamphouseNosepieceReversed quintupleObjective classificationCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)Objective mounting threadW 4/5"x1/36" (RMS standard)Stand typeUpright with pole stand with focusing block and baseStageMechanical stage, hard coated with coaxial stage controlStage size180x140mmTravel range X&Y100x80mmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2μmFocusing stroke30mmIncident illuminationQuartz halogen 12V/50W with integrated field and aperture diaphragmsIllumination interchangeabilityQuartz halogen 12V/50W or LED 3WIllumination featuresExternal lamp house for Epi-illuminatorTransformerExternalPower supply100-240V (CE)Dimensions LxWxH369x485x391mmBase300x300mmNet weight15.7kgComparison of ModelsSpecificationMotic BA310 MET BinocularMotic BA310 MET TrinocularMotic BA310 MET-H TrinocularMotic BA310 MET-H Trinocular (Erect Image)Motic BA310 MET-T Trinocular (3"x2" Stage)Motic BA310 MET-T Trinocular (6"x4" Stage)Motic BA310 MET-T Trinocular (Erect Image)Motic BA310 MET-T Trinocular (Stroke 3”x 2” Stage) (Erect Image)Observation TubeBinocular headTrinocular headTrinocular headTrinocular head (Erect Image)Trinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingTrinocular head, Siedentopf type, 360° SwivelingInterpupillary Distance48-75mm48-75mm55-75mm55-75mm48-75mm48-75mm48-75mm48-75mmObjective ClassificationCCIS® EC Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® LM Plan Achromatic, DINCCIS® EC Plan Achromatic, DINCCIS® LM Plan Achromatic, DINObjectives5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 11.5mm), 10X/0.3 (WD 6.8mm), 20X/0.40 (WD 11.1mm), 50X/0.55 (WD 8.2mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)5X/0.13 (WD 20.3mm), 10X/0.25 (WD 17.5mm), 20X/0.40 (WD 8.1mm), 50X/0.55 (WD 8.4mm)StageMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage control and glass plateMechanical stage, hard coated with built-in low position coaxial stage controlMechanical stage, hard coated with built-in low position coaxial stage control and glass plateStage Size180x140mm180x140mm180x140mm180x140mm240x140mm300x180mm180x140mm240x140mmTravel Range X&Y75x50mm75x50mm100x80mm100x80mm75x50mm150x100mm75x50mm75x50mmIllumination InterchangeabilityQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3WQuartz halogen 12V/50W or LED 3WEpi-illuminator Quartz halogen 12V/50W or LED 3W, transmitted Quartz halogen 6V/30W or LED 3W.comparison-table tr td:nth-child(4) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: stainless steel wire Nominal value: 5 mg Material: stainless steel Exceptional Measurement Precision F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

Capacity: 96 tubes 0.2 ml, 96 well microplates Block: Silver Block coating: Gold Max Heating Rate: 6 (more).0°C/sec Max Cooling Rate: 4.0°C/sec Avg Heating Rate: 5.5°C/sec Avg Cooling Rate: 3.5°C/sec Temperature Uniformity at 95°C: ± 0.50°C after 15 s Temperature Uniformity at 70°C: ± 0.25 °C after 15 s Temperature Uniformity at 55°C: ± 0.15 °C after 15 s Gradient Temperature Range: 3°C to 99°C Temperature Range: 3°C to 99°C Control Accuracy: ± 0.1°C Lid Temperature Range: 30°C to 110°C Dimensions (WxDxH): 277 x 457 x 264 mm Weight: 15 kg

Thermo Scientific Electron Finnpipette 20-200µL Laboratory Pipette 20-200µL Variable Volume Pipette  (more)Tip Type: For use with Finntip Flex 200, 200 µL tips Volume: 20-200 µL Increment: 5.0 µL Uncalibrated Test performed using a 10-4 g (0.1mg) balance: Reading (in g) for 200 µL: 0.201