Set 3x 5mL Micro Hand Operated Tissue Homogeniser Dounce Glas Hand Homogenisator

Silverson L4R High Shear Homogenizer Lab Mixer Emulsifier Lab This item was removed from a universit (more)y where it was surplus to requirement. The unit powers up and is in good working order. It is in reasonably poor cosmetic condition.

Benchmark D1000 Homogenizer with 5mm and 7mm Generators Benchmark’s new handheld homogenizer, the D1 (more)000, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1ml to 250ml (depending upon the generator probe used). The D1000 is a rotor stator homogenizer, and works by drawing the sample, in liquid, into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds are less. A powerful, 130W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting. Generator probes are available in four sizes. The 5mm and 7mm diameter have a 50mm length for use with samples in microbtubes. The 10mm x 115mm is ideal for use with 15 and 50ml tubes and 14mm x 130 mm, for 50ml tubes and vessels up to 250ml. The unit is supplied with one each of the 5mm and 7mm generator probes. All the generator probes are made of stainless steel and can be sterilized by autoclaving. INCLUDED: The Benchmark D1000 Homogenizer with 5mm and 7mm Generators includes: - 5 & 7mm Generator Probes - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex D160 Homogenizer Package - Drive Motor DS-160/5 The Scilogex D160 Homogenizer can rapidly h (more)omogenize, disperse, and emulsify samples from 0.1-50ml solids or liquid media depending on the generating probe. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 30,000rpm. The material is repeatedly cycled through narrow slits in the probe where it is rapidly sheared and disintegrated by high shear. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in a few seconds. Little, if any, heat is produced during the process. Package includes: Drive motor- DS-160/5 5mm diameter generator, flat head open slot, 50mm immerse length, H-370 stand. INCLUDED: The Scilogex D160 Homogenizer Package - Drive Motor DS-160/5 includes: - H-370 Stand - D160 Drive Motor - 5mm Dia. Generator Probe - 50mm Generator Shaft - Holding Clamp - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The SpeedMill PLUS is a highly efficient homogenization system for various starting materials used f (more)or the subsequent isolation and purification of DNA, RNA or proteins. This new process allows users to operate the SpeedMill PLUS continuously if necessary. The high efficiency of energy input into the sample, based on a vertical movement, procures a homogeneous disruption of the sample without destroying the target molecules. Homogenization time: 30 sec to 4 min (depending on the starting material) Programmable homogenization step: 1 sec to 4:59 min Number of cycles: 1 – 99 Protocol steps: 1 – 6 Storable protocols: 20 Sample cooling: Passive cooled sample holder storage at temperatures down to -80°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Perkin Elmer Arnel Autosystem XL GC This system was removed from a university where it was surplus t (more)o requirement. It powers up and is in good cosmetic condition, we are unable to test it further at our facility.

Scientific Industries Mini-300 Orbital-Genie, Flask Clamps Heavy duty standard footprint Orbital Sha (more)ker for Standard Flask Clamps with variable shaking speed up to 300RPM. Ideal for applications using various size flasks or beakers. Clamps sold separately.Scientific Industries Mini-300 Orbital-Genie, Flask Clamps Specifications Speed (RPM) 35-300 RPM Orbit 19mm Product Weight 10.25 Kg (22.6 lbs.) Dimensions (base) 305 x 305mm(12 x 12in) Overall (D x W x H) 350 x 350mm (14 x 14in) Platform Dimension 290 x 290mm (11.4 x 11.4in) Warranty 24 months Markings CE

Corepoint Scientific CPS-HC-PLD-49-TS 1C to 10C Premium CX Series Touchscreen Laboratory Refrigerato (more)r Temperature Setpoint Range 1°C to 10°C Capacity 49 cu. ft. (1387 L) Defrost Method Cycle Optimized, Zero Energy Features - State-of-the-art touchscreen controller with microprocessor temperature control for precise, user-friendly operation - Variable speed compressor for ultra-quiet performance, energy savings, and extended equipment life - Forced air circulation system for optimal temperature uniformity and rapid recovery - Advanced alarm system with customizable audible & visual alerts, adjustable alarm delays for door, temperature, and power loss, and ring-back functionality to re-engage alarms if conditions persist - Two secure glass swings door with a keyed lock and magnetic gasket to ensure sample integrity - Environmentally friendly design utilizing R600a refrigerant and high-density urethane foam insulation The Premium Corepoint Scientific CX Series Lab Touchscreen Refrigerators deliver superior cooling to laboratory environments. Engineered with variable speed compressors (VSCs), these units feature ultra-quiet operation and significant energy savings. VSCs optimize energy consumption by self-adjusting to cooling demands. These compressors also deliver enhanced system performance and provide a longer lifespan than other compressor variations. The CX line showcases the most elite features including state-of-the-art touchscreen controllers, advanced alarm systems and data logging capabilities. All units are powered by microprocessor temperature control. These units also utilize natural, hydrocarbon refrigerants for environmental health and energy efficiency. Upgrade your laboratory with these advanced units and welcome energy savings, noise reduction, smooth operation, and improved system performance to your work environment. INCLUDED: The Corepoint Scientific CPS-HC-PLD-49-TS 1C to 10C Premium CX Series Touchscreen Laboratory Refrigerator includes: - Key for Door Lock - 10 x Adjustable Shelves - 4 x Swivel Casters - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

High precision measurements The 500 g class E2 mass standard is a precision metrology tool, ideal fo (more)r calibrating high-precision balances used in metrology, pharmaceutical, chemical laboratories and other research and industrial institutions. Product Features The ergonomic, cylindrical shape ensures ease of use and precise placement of the standard on the weighing platforms. Made from the best materials, it guarantees stability and resistance to changes in environmental conditions.

Stainless Steel Wire - set (1 mg - 500 mg) F2-class mass standards represent an impressive level of  (more)precision in mass measurement. Classified as metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 Class Mass Standards – Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. The set includes: wooden box 12 mass standards 1 pair of tweezers 1 brush Material: stainless steel Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW