MARSHALL Select MS-HO50 Homogenizer Package, 0.1-50ml

Qaigen Tissuelyser II unit and Qaigen Tissuelyser adapter set 2 x 24 (box) This was removed from a u (more)niversity lab where it was surplus to requirements. The unit powers up and is in very good cosmetic condition. We are unable to test it further at our facility. The client confirmed it had never been used and is brand new. Includes the following; Model-TissueLyser II Qaigen Tissuelyser adapter set 2 x 24 (box Sealed)

This Constant Cell Disruption Systems Z2/40/AA/AA Cell Disruptor was removed from a university lab w (more)here it was surplus to requirements. The system powers up and is in reasonably good cosmetic condition with minor marks from previous use. Main unit - L70 W58 H77cmFrame - L68 W54 H57cm

Benchmark D1000 Homogenizer with 5mm and 7mm Generators Benchmark’s new handheld homogenizer, the D1 (more)000, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1ml to 250ml (depending upon the generator probe used). The D1000 is a rotor stator homogenizer, and works by drawing the sample, in liquid, into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds are less. A powerful, 130W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting. Generator probes are available in four sizes. The 5mm and 7mm diameter have a 50mm length for use with samples in microbtubes. The 10mm x 115mm is ideal for use with 15 and 50ml tubes and 14mm x 130 mm, for 50ml tubes and vessels up to 250ml. The unit is supplied with one each of the 5mm and 7mm generator probes. All the generator probes are made of stainless steel and can be sterilized by autoclaving. INCLUDED: The Benchmark D1000 Homogenizer with 5mm and 7mm Generators includes: - 5 & 7mm Generator Probes - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BeadBlaster Microtube Homogenizer The BeadBlaster 24 completely lyses, grinds and homogeni (more)zes a broad variety of biological samples. Even the most difficult and resistant samples are fully homogenized, often in 35 seconds or less. The stainless steel tube carrier subjects up to 24 samples to an optimized, high speed, 3D motion, producing high energy impacts between the samples and micro-beads to release cellular contents. After homogenization, samples can be centrifuged and the supernatant collected for further processing. Operating parameters for the BeadBlaster 24 are set and displayed digitally. To protect fragile, heat sensitive samples, the unit can be programmed to operate in shortened consecutive cycles with a rest period in between. Up to 50 such programs can be stored in memory and recalled for future use. A transparent lid allows for visualization of samples, and features a mechanical lid lock that prevents opening owhen the BeadBlaster is in operation. A brushless motor reduces motor noise and provides maintenance free operation. Benchmark offers an assortment of prefilled tube kits for a variety of sample types. The popular Triple-Pure kits include acid washed, heat treated, zirconium beads. The beads are tested to be free of nucleases, making them ideal for molecular biology applications. A convenient starter kit (D1032-SK) is available to accommodate a broad range of sample types and optimize applications. Click Here to View Product Video INCLUDED: The Benchmark BeadBlaster Microtube Homogenizer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BeadBlaster 96 Ball Mill Homogenizer, 120V The BeadBlaster™ 96 is an extremely versatile b (more)ead mill homogenizerthat has applications in a variety of areas, including biologicalresearch, environmental testing, and industrial settings. Adaptersare available for microplates, microtubes, and 50ml tubes. Grinding jars and balls in a variety of materials are available.Wet homogenization, dry grinding and cryogrinding can allbe performed with the BeadBlaster™ 96. The arced motion ofthe sample holders and powerful motor allow most samples tobe processed in 1 minute or less. All parameters are digitallycontrolled through the large touch screen and 9 programs can bestored in memory.The safety cover lifts up for easy access to the sample holders andautomatically locks during operation. The wrap-around design ofthe clear acrylic lid allows for visualization during homogenization. Click Here to View Product Video INCLUDED: The BeadBlaster 96 Ball Mill Homogenizer, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Thermo Scientific HPLC System -600 Pump, Autosampler,PDA Detector and MSQ Plus This system was remo (more)ved from a university lab where it was surplus to requirements. The units are all in good cosmetic condition with marks from use. Everything powers up, but we are unable to test them further at our facility. This system consists of; 1 x Thermo Scientific Accela 600 Pump.1 x Thermo Scientific Accela PDA Detector.1 x Thermo Scientific Accela Autosampler.1 x Thermo Scientific Accela Tray.1 x Thermo Scientific Accela MSQ Plus.

Texol Genysis NitroGenerator Nitrogen Generator This item was removed from a university lab where it (more) was surplus to requirements. The unit is in reasonably good cosmetic condition, with some stain marks on the top and side panels. It is mounted on four wheels and operates on a 24-volt power system, but no power adapter is supplied. When powered on, the front power light illuminated, and the programmer inside the front door displayed system information. No further testing could be carried out as the unit must be controlled by an external system. Power supply not included.

Motic BA210E LED Binocular Compound Microscope Magnification Range 4x to 100x Optical System Colour  (more)Corrected Infinity (CCIS) Illumination 3W LED Features - Optional intermediate Epi-LED S fluorescence module - Quadruple nosepiece - EC Plan achromatic objectives - Compact rackless stage - Upgradable with phase & pol contrast and simple darkfield - Fixed-Koehler illumination, HAL/LED interchangeability - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) Motic’s BA210E is dedicated to give an answer on basic demands from educational and biomedical laboratory work. The upgraded EC Plan Achromatic objectives in our CCIS© Infinity Concept deliver a fully corrected intermediate image for crisp and clear results within a 20mm Field of View. The rackless stage enables a safe x/y scanning even for the unexperienced user. The complete series of EC Plan Achromatic objectives, from 4X to 100X magnification, is achieving an improved image contrast both for human eye and digital cameras through the photo port. Especially in Phase contrast, the optional objectives (positive & negative Phase) show a remarkable performance for a wide range of applications. The N-WF eyepieces start with the standard 10X/20 mm Field of View and provide a diopter adjustment (+/-5dpt) for both eyes, ready for the use of optional reticles. Motic's BA210E is designed for a demanding daily usage. The rackless stage allows a safe evaluation of samples without prominent gear rack. The standard eyepiece tubes feature a 30° viewing angle for maximum comfort, whereas the interpupillary distance of 55-75mm can easily be adjusted, following individual conditions. The trinocular tube option with a 100:0 / 20:80 light split allows the adaption of digital camera systems and the presentation of microscopic images to a larger public. The BA210E is an integral part of Motic’s BA microscope concept. An upgrade with Phase contrast (positive & negative), Darkfield, Polarization and even LED Fluorescence can easily be performed. The BA210E exceeds the limits of a basic upright microscope, allowing to use contrast methods for specific application fields even in teaching environments with limited resources. INCLUDED: The Motic BA210E LED Binocular Compound Microscope includes: - Binocular head Siedentopf type 30° inclined, 360 ° rotating - Widefield high eyepoint eyepiece N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat Objectives EC PL 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial rackless stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 3WLED module - 45mm blue filter, immersion oil (5mL), allen hexagonal key, thumb screw, vinyl dust cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

ZEISS AXIOPHOT EL-Einsatz laboratory microscope 451889 2 optics / Objectives: Zeiss Plan-NEOFLUAR 10 (more)X /0.30 440331 phase contrast Zeiss Plan-NEOFLUAR 100X /1.30 Oil Phase contrast only on 10X objective Binocular head Adjustable eyepieces Pl 10x/25 444034 230-240V ~, 50/60Hz 100W Halogen lamp Adjustable light intensity Not equipped with fluorescence Non-motorized turntable

PS R2.H series balances redefine the level of standard precision balances. Not only do they share al (more)l the features of R series balances, but can also work in adverse operating conditions (condensed dust, drops of water falling down at different angles typical for IP 54). LCD display These balances are equipped with innovative LCD display allowing for clear and legible presentation of a measurement result. Moreover, it offers new text line which supplies the user with some additional messages and information, e.g. product name or tare value. Interfaces Additional asset of PS R2.H balances are their interfaces build-in a hermetic closed housing which is separated from the balance. The interfaces include 2×RS 232, USB type A, USB type B, and Wireless Connection optionally. Balance housing is made of plastic, whereas its pan of stainless steel. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.