Yamato DNF-401 Programmable Energy Saving Forced / Natural Convection Oven 90L, 115V

Thermo Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The shaking plate and Rotisserie shaker are both in good working order. It is in good cosmetic condition with minor marks.

Hybaid Maxi 14 Hybridisation Oven This was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and is in good working order, but may need calibrating to your equipment. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks. Internal Dimensions - D34 W34 H50cm

Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V Operating Temperature Range 100°C to 1150 (more)°C Max. Temperature Reaching Time ~80 min. Internal Capacity 11.3L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 11.3L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Gilson MyPIPETMAN Select Multichannel P12x300, 20-300 uL PipetteFeatures - Designed to be ergonomic, (more) safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 300 uL - 3 Year Manufacturer's Warranty

IKA KS 130 Control Shaker Type of Movement Orbital Speed Range 0 to 800 RPM Shaking Stroke 4 mm Fea (more)tures - Electronic adjustment of speed and timer - A digital display makes it possible to read the speed, timerfunction and operating modes - Electronic time switching clock: 0 - 9 h 59min or continuousoperation (endless) - With integrated end point positioning (for automatedrobot-controlled sampling) - All functions can be controlled and documented withlabworldsoft® - Wide range of attachment combinations makes it possible touse almost all shapes and sizes of vessels - Attachments are not included in delivery, please orderseparately The KS 130 control open air orbital shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 2.0 kg, it can handle a variety of vessel sizes and shapes. The shaker's integrated end point positioning function is highly useful for automated robot-controlled sampling.INCLUDED: The IKA KS 130 Control Shaker includes: - KS 130 control - Attachment screws (4x) - Single-head wrench - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA KS 130 Control Shaker Specifications Type of movementorbitalShaking stroke4 mmPermissible shaking weight (incl. attachment)2.0 kgMotor rating input45 WMotor rating output10 WPermissible ON time100 %Speed min (adjustable)80 rpmSpeed range0 - 800 rpmSpeed displayLCDTimeryesTimer displayLCDTime setting range1 - 599 minOperating mode timer and continuous operationShaking table lock yesDimensions (W x H x D)270 x 98 x 316 mmWeight8.8 kgPermissible ambient temperature5 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesAnalog outputyesVoltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input45 WComparison of ModelsSpecificationsIKA KS 130 Basic ShakerIKA KS 130 Control NOL ShakerIKA KS 130 Control ShakerIKA KS 260 Basic ShakerIKA KS 260 Control NOL ShakerIKA KS 260 Control ShakerIKA KS 501 Digital ShakerShaking Stroke4 mm4 mm4 mm10 mm10 mm10 mm30 mmPermissible Shaking Weight (incl. attachment)2.0 kg2.0 kg2.0 kg7.5 kg7.5 kg7.5 kg15 kgMotor Rating Input45 W45 W45 W45 W45 W45 W70 WSpeed Range80 - 800 rpm80 - 800 rpm80 - 800 rpm50 - 500 rpm10 - 500 rpm10 - 500 rpm0 - 300 rpmTimerYesYesYesYesYesYesYesTime Setting Range5 - 50 min1 - 599 min1 - 599 min5 - 50 min1 - 599 min1 - 599 min1 - 55 minDimensions (W x H x D)270 x 98 x 316 mm270 x 98 x 316 mm270 x 98 x 316 mm360 x 98 x 420 mm360 x 98 x 420 mm360 x 98 x 420 mm505 x 120 x 585 mmRS 232 InterfaceNoYesYesNoYesYesYesAnalog OutputNoYesYesYesYesYesYesVoltage220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V230 / 115 / 100 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Pallet scales is stable and proved 4 load cell construction designed for weighing pallets. The load  (more)to be weighed can be placed on the platform by a standard fork-lift truck. Pallet scales H315/4P/H series is manufactured in stainless steel technology. The H315/4P/H series features wheels and handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.