Vankel VK7010 Dissolution System VK750D Heater/Circulator Labs

This Sanyo MDF-593 Ultra Low Temperature Chest Freezer ULT 487 Litres was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It was in use right until we collected it. It is in good cosmetic condition with marks from use. Capacity 487 litersMinimum temperature -93˚CInner dimensions 128 x 49 x 75cm (w x d x h)16 x racks 13.5 x 13.5 x 75cm with 3 shelves and 9 sets of support brackets9 x racks 14.5 x 14.5 x 55cm with 7 sets of support brackets

Ultra-low Temperature Freezer -80°C / 363 LIters ESCO UUS-363B-1-SS Lexicon II Temperature Range : (more) -50 to -86˚C Ambient temperature range : 15 to 32˚C (59 to 89˚F) 3 inner doors Interior volume (liter) : 363 Overall dimensions (w x d x h in mm) : 805/945/1980 Internal dimension (WxHxD) (mm) : 450x620x1300 Number of inner doors : 3 No. of storage racks per unit : 9 or 15 Shelves Area : 438 x 570 mm 230v/50Hz With Gold Controller : Microprocessor controller 4x20 in LCD screen Audible and visual alarms USB port for data download Net Weight : 271 kg (597 lbs) Shipping Weight : 321 kg (707 lbs) Shipping dimensions (WxDxH) : 850 x 1068 x 2121 mm

Faithful WGLL drying oven Series. Temperature range RT+5 ºC to 300 ºC. Stability ± 1 ºC. Uniformity (more) ± 2,5 ºC. Horizontal movement of air high efficiency and high uniformity thanks to air ducts double. Switch fan 3 speeds, adjustable according to needs. Temperature controller LCD with set to 0.1 ºC. Limiter temperature independent. SSR to ensure safety. System overheating protection. Digital LED display. Optional: RS485 interface, printer, remote control, SMS alarm Wireless, USB data storage. The price shown is for the model 30 L (WGLL30BE). For larger volumes, select model drop-down.

Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 53 L (1.9 cu. ft.) Features - 53 L (1.9 cu. ft.) internal volume with ample capacity - Temperature range from +20°C to +80°C with natural convection - High accuracy with 0.1 °C temperature setting resolution - Equipped with two Pt100 sensors for precise monitoring and fault tolerance - TwinDISPLAY with adaptive PID-microprocessor control and dual TFT displays - AutoSAFETY with integrated over- and undertemperature monitoring and alarms - Fully insulated stainless steel door with 2-point locking system - AtmoCONTROL software for programming via USB or Ethernet interface The Memmert UN55PA Natural Convection Paraffin Oven 53L, 115V, offers a spacious 53-liter (1.9 cu. ft.) chamber ideal for precise paraffin applications and reliable temperature control. Operating within a temperature range of +20°C to +80°C, this oven features natural convection to provide even heat distribution without the need for forced airflow. Its highly accurate 0.1°C temperature setting resolution is maintained by dual Pt100 sensors, ensuring consistent performance with integrated fault tolerance for added security. The adaptive PID-microprocessor controller with TwinDISPLAY and dual high-definition TFT displays allows for intuitive control, precise adjustments, and continuous performance monitoring. This oven is equipped with advanced safety features, including the AutoSAFETY system, which offers automatic over- and undertemperature protection with visual and acoustic alarms to prevent overheating. The robust stainless steel interior is easy to clean and reinforced for durability, while the fully insulated stainless steel door with a 2-point locking system ensures an airtight seal. For ease of programming and monitoring, the AtmoCONTROL software is included, allowing users to manage settings and transfer programs via USB or Ethernet. The UN55PA is built for efficiency, reliability, and the highest standards of paraffin application. INCLUDED: TheMemmert UN55PA Natural Convection Paraffin Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Boekel Scientific 115004 Block Heater w/Touch Screen, 4 Block, 115V The Programmable Heating Blocks  (more)are designed for precise controlling of sample temperatures. Heating Blocks, also known as dry bath incubators, use aluminum inserts to suit the use of many types of laboratory test tubes, plates, and containers. Boekel programmable heating blocks are designed to be used with standard aluminum dry blocks (nominally 3” deep x 3 ¾” wide x 2” high) of varying configurations for heating test tubes, microtubes, and other small vessels. The Programmable Heating Blocks use an advanced touch screen control system to create and store programs. Programs can have a maximum of five different temperature steps and there is a repeat function for thermal cycling procedures. An option external temperature probe is available for spot temperature checking and controlling the unit temperature. *Block sold separately* Features •Readily Recognizable Icons to Start, Stop and Pause Temperature Control on a Bright Color Touch Screen •Save up to 25 Programs for Rapid Sample Processing •One, Two, and Four Block Models to Fit Your Workflow •Slim Design to Conserve Bench Space •Optional External Temperature Probe •UL, CE, CSA approved Modern laboratories require modern equipment to reduce repetitious procedures and increase accuracy and throughput. The Boekel Scientific’s programmable heating blocks are designed to accommodate the most basic sample incubation procedures to multi-step heating processes and thermal cycling procedures. The slim One, Two and Four block design allows for more bench space and a configurable work flow. The optional external temperature probe is great for spot checking temperatures or controlling block temperature based on the actual sample temperature.Click Here to View Product Video INCLUDED: The Boekel Scientific 115004 Block Heater w/Touch Screen, 4 Block, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Stirring quantity: 5 L Temperature range: Ambient – 350ºC Speed range: 0 – 2,000 rpm Heat output: 40 (more)0 W Heating plate surface: Ø 125 mm Dimensions (WxDxH): 160 x 210 x 105 mm Weight: 2.3 kg

Technical features Flow rate (max.) 6 l / min Final vacuum (max.) 100 mbar (abs.) Pressure (max.) 2. (more)4 bar (rel.) Permissible fluid temperature 5-40 ° C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PPS Applications Filtration Aspiration of liquids Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Ecological Maintenance free Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 7.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 7.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Highest Precision The E1 class mass standard of 5 g is a cylindrical standard with the highest preci (more)sion, designed for applications requiring accurate measurements. Made of high-quality materials to ensure stability and measurement accuracy. Ideal for laboratories, research centers, and anywhere precision weighing is needed.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Benchmark MyTemp 65HC Digital Cooling Incubator The myTemp 65HC Incubator is designed to provide acc (more)urate and uniform temperature control from 0 to 60C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications. A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc. With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.. With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32in/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH). INCLUDED: The Benchmark MyTemp 65HC Digital Cooling Incubator includes: - Two Adjustable Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: 5°C to 35°C Temperature stability: 0.1°C Cooling capacity (Ethanol): 5 kW Max flo (more)w rate (at 0 bar): 33 L/min Max pressure (at 0 liters): 3.5 bar Filling volume: 43 to 60 L Dimensions (WxDxH): 590 x 670 x 1120 mm Weight: 153 kg