Uniqsis Cold Chip Versatile heating and cooling reactor for GSM 'chips'

Sanyo MDF-U730M Biomedical Freezer Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Includes: 6 x Shelves - 62 x 62cm12 x Containers - 62 x 31 x 16cm

CryoBox Freezer Rack THERMO SCIENTIFIC 5038-4322 Brand new in original packaging For standard cryoge (more)nic boxes with ease with these durable stainless steel and aluminum freezer racks, which fit most standard chest freezers and upright freezers Part number: 5038-4322 For 12 standard Cryoboxes 12-place rack (4X3) Type: horizontal Dimensions: 22.5 x 44.4 x 14.3 cm (lxWxH)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato SDP-400 Vacuum Oven 127.4L, 110-120V Operating Temperature Range +10-220°C Operating Pressu (more)re Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Discover the ultimate solution for precise temperature control and reliable vacuum performance with the SDP Series Vacuum Oven, now available in SDP400 and SDP410 models. Offering an impressive operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, this oven is a versatile addition to any laboratory. The EZ-ZONE Watlow controls ensure ease of operation, and the KF25 access port provides convenient access. Enjoy exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.2°C at 80°C, ± 0.25°C at 150°C, and ± 0.3°C at 220°C. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior features 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W457 x D610 x H457 mm provide ample room for your samples. With a generous internal capacity of 127.4L, six sturdy shelves, each capable of holding up to 15.8 kg, and a maximum total load of 47.6 kg, this oven is ideal for a wide range of applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 13A or AC220 - 240V 7A) and is a robust and dependable workhorse for your lab, weighing in at ~144kg. It comes complete with three shelves, 12 shelf clips, a power cord, and four leveling feet, making it an essential asset for your laboratory needs.INCLUDED: The Yamato SDP-400 Vacuum Oven 127.4L, 110-120V includes: - 3 Shelves - 4 Leveling Feet - 12 Shelf Clips - Power Cord - One Year Manufacturer's Warranty

IKA Oven 125 Control Drying Oven w/ Glass Door Heat Output 1500 W Working Temperature room temp. + (more)5 - 300 °C Operating Area Inner chamber 550 x 525 x 450 mm Features - Powerful IKA Oven 125 series for drying, heating, ageing, with rapid and precise temperature control. - 125 l high-quality insulated interior for cost efficiency, odour reduction, and uniform temperature. - Heats up to 300°C with TWB security features and independent temperature curve monitoring. - Glass door enhances monitoring of samples, ensuring safety and precision. - Well-lit interior, automatic fan-off when door opens, and up to 6 stainless steel shelves. - Includes interface for an extra sensor and USB storage for direct regulation and data logging. - Two TFT displays for clear parameter visibility, intuitive user interface for profile management. - Equipped with real-time clock for digital documentation and programmed start. The models in the IKA Oven 125 dry series are powerful drying cabinets for temperature regulation, drying, ageing and heating tasks. Rapid heating and exact temperature regulation guarantee reproducible results in industrial laboratories, schools and universities, research, quality control or science. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions and operating costs and ensures excellent temperature uniformity.The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C. The additional temperature selection limited TWB (DIN 12880) meets the highest security requirements. Furthermore, the temperature curve can be monitored during testing independently of the safety temperature. This means that your test material is always protected.The glass door allows for better monitoring of your samples.A well thought out interiorThe generously dimensioned interior of the Oven 125 control dry is comfortably illuminated. A practical cable bushing at the rear of the device is provided as standard for measurements in the oven or in the test material. The fan switches off automatically if the door is open. Up to 6 insertable shelves can be accommodated in the interior made of stainless steel.InterfacesThe Oven 125 control dry offers an interface for an additional sensor for direct temperature regulation in the test material. Test parameters can be stored directly on a USB stick.Two displaysAll important process parameters are displayed clearly on two large TFT displays. The temperature profiles and individual user profiles can be entered via the intuitive user interface. The real-time clock enables convenient digital documentation and a time-delayed start.Click Here to View Product Video INCLUDED: The IKA Oven 125 Control Drying Oven w/ Glass Door includes: - IKA Oven 125 control - dry glass - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Control Drying Oven w/ Glass Door Specifications Heat output1500 WWorking temperatureroom temp. +5 - 300 °CAdjustable safety circuit50 - 270 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer displayLCDTime setting range1 - 142560 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 l Air outlet port diameter inside48 mm Dimensions (W x H x D)700 x 825 x 650 mmWeight89 kg Permissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1600 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; } Request a Formal Quote

Dimensions (WxDxH): 600 x 490 x 600 mm

Techne’s Dri-Block heaters provide a safe, dry, constant temperature source in the laboratory. The u (more)nit can be used for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes. Working temperature range: Ambient to 100°C Temperature stability: ±0.05°C at 40°C Temperature stability: ±0.1°C at 100°C Temperature setting: 3 push buttons Temperature display: 4 digit LED Set point resolution: 0.1°C Set point accuracy: ±1°C Temperature variation: 0.2°C at 40°C Heat up time 30°C to 37°C: 8 min Heat up time 30°C to 56°C: 9 min Heat up time 30°C to max: 12 min Dimensions (H x W x D): 105 x 240 x 202 mm

Varian Cary Fibre Optics Coupler This item was removed from a university lab where it was surplus to (more) requirements. The item is in good cosmetic condition and is housed in a protective box. Unable to test for operational status. Includes:- Phillips screwdriver - Small spanner Serial No.: 94081255

CAE Healthcare METIman Patient Simulator Lab This item was removed from a university lab where it wa (more)s surplus to requirements. It is in good clean condition, due to the power supply not being included we are unable to test it. Operating System Support Minimum Requirements available on request. This item includes a MacBook with the operation manual on it. Unfortunately, it seems like the software was deleted before we received the system. This MacBook requires a plug-in connection to remain powered on, when the cable is removed it no longer powers on. *Examination bed not Included* No power leads supplied with the Item.

Hoefer TE77X Semi-Dry Transfer Unit Transfer Area Up to 21 x 26 cm Maximum Power Settings 30 V, 500 (more) mA, 15 W Maximum Gel Capacity 12 Mini Gels Features - Included safety circuit breaker—limits voltage and current from the user's power supply, preventing electrical damage to the transfer unit - Requires minimal current—does not generate the excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent buildup of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE77X Semi-Dry Transfer Unit is an efficient and robust system designed to transfer proteins from polyacrylamide gels in under an hour, using minimal buffer. With a spacious 21 x 26 cm transfer area, this unit can accommodate up to 12 mini gels simultaneously, allowing for high-throughput transfers in less time. Engineered to prevent excessive heat buildup, the TE77X supports up to two gel layers being transferred at once without risk of drying out or halting the transfer process. This unit features durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent protein transfer. The vented electrode design helps prevent bubble buildup, which can interfere with transfer quality, while the included safety circuit breaker protects the transfer unit from electrical surges. Equipped with platinum-coated titanium anodes and stainless steel cathodes, the TE77X is built for longevity and reliability. With minimal buffer requirements, it reduces reagent costs and preparation time, making it a cost-effective choice for any lab focused on efficiency and precision. INCLUDED: The Hoefer TE77X Semi-Dry Transfer Unit includes: - Molded Base with Platinum-Coated Titanium Anode and High Voltage Leads - Hinged Lid with Stainless Steel Cathode - Blotting Paper (21 x 26 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (23 x 27.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty