Thermo 2052-1CE Multi-Blok Analog Dry Block Heater

New Brunswick Scientific Ultra Low Temperature Freezer U535 -86 This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in full working order. It is in good cosmetic condition, with minor marks from use.

Memmert UF30 Forced Circulation Oven 32L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features - Internal volume of 32 L (1.13 cu.ft.) for flexible applications - Working temperature range from min. 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF30 Forced Circulation Oven 32L, 115V is engineered for precise temperature control and uniform heat distribution, making it ideal for a wide range of laboratory and industrial applications. This model offers a spacious 32L (1.13 cu.ft.) capacity and operates within a setting temperature range from +20 to +300°C, accommodating diverse heating requirements. Its advanced ControlCOCKPIT system features an adaptive digital PID-microprocessor controller with a high-definition TFT-color display, allowing intuitive programming and monitoring. The oven includes a Pt100 temperature sensor in a 4-wire circuit, ensuring consistent readings and effective mutual monitoring. To further enhance accuracy, the adjustable parameters cover Celsius or Fahrenheit temperature settings, air flap position, program time, and even time zones, supported by SetpointWAIT technology, which starts the process time only once the set temperature is achieved. Built with durability and hygiene in mind, this unit features a fully insulated stainless steel door with inner glass, providing secure two-point locking to maintain a stable environment. The oven's stainless steel interior is not only easy to clean but reinforced with deep drawn ribbing and protected large-area heating on all four sides for reliable performance. An integrated auto-diagnostic system aids in fault analysis, and the adjustable overtemperature monitor and mechanical limiter add layers of safety to its operation. The unit comes with a works calibration certificate for +160°C, validating its performance standards. Designed with a user-friendly AtmoCONTROL software for data logging and programming, the Memmert UF30 Oven is an all-encompassing solution for precise and reliable heating tasks. INCLUDED: TheMemmert UF30 Forced Circulation Oven 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Polyscience MM71MX1A110C MM7 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz3D Visualization of t (more)he Polyscience Benchtop ChillerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. LM-Series and MM-Series Compact Chillers provide cooling power for demanding applications and serve as economical alternatives to tap water cooling systems. They feature a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. LM-Series and MM-Series Chillers are equipped with a magnetic drive centrifugal pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Precise and stable temperature control at low temperatures Large, easy to read LED display Space-saving, benchtop design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Choice of two different centrifugal pumps Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience MM71MX1A110C MM7 Benchtop Chiller , -5°C to 50°C, 460W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: 16°C to 22°C Cooling power (at 20°C): 600 watt Pump capacity max. 0.4 bar pump: 2 (more)8 l/min Pump capacity max. 3.5 bar pump: 10 l/min Dimensions (WxDxH): 360 x 470 x 590 mm Weight: 52 kg

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

This Hema-Tek 2000 Slide Stainer Model - 4436 was removed from a university lab where it was surplus (more) to requirements. This item is in good cosmetic condition and powers up, but we are unable to test it further at our facility.

Corepoint Scientific LRF151WWW-0HC Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C F (more)reezer Temperature Setpoint Range 10°C to -15°C Capacity 14 cu. ft. Defrost Method Auto Features - Two exterior solid swing doors, right hinged, reversible - Two adjustable glass shelves (refrigerator) and two-gallon door bins, plus one half gallon door bin - One full width glass shelf (freezer) and 2 fixed door bins - High density urethane foam cabinet and door insulation - Magnetic door gasket for positive seal - Interior LED refrigerator light - Leveling legs The Corepoint Scientific LRF151WWW-0HC Solid Door Laboratory Combo provides a practical solution for laboratories requiring both refrigerated and frozen storage within a compact footprint. This unit features a 10 cubic foot refrigerator and a 4 cubic foot freezer, each controlled by mechanical thermostats, allowing for precise temperature settings from 1°C to 10°C in the refrigerator and -15°C to -25°C in the freezer. Constructed with high-density urethane foam insulation and a durable powder coat steel exterior, the combo ensures optimal thermal efficiency and robustness. Key attributes include two right-hinged solid doors with magnetic gaskets for a secure seal, recessed handles, and keyed locks for added security. The interior accommodates a variety of storage needs with adjustable and fixed shelving and a removable basket in the refrigerator for flexible organization. Auto-defrost functionality in the freezer simplifies maintenance while maintaining a frost-free environment, although it's noted that defrost cycles may cause temporary fluctuations in temperature. The unit stands on leveling legs that facilitate easy installation and stability on uneven surfaces, measuring 27 3/8 inches wide, 29 inches deep, and 60 3/8 inches high. Utilizing R600a refrigerant, the LRF151WWW-0HC is designed to meet the needs of general laboratory applications where efficient, dual-temperature storage is crucial. INCLUDED: The Corepoint Scientific LRF151WWW-0HC Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - 2 Adjustable Glass Refrigerator Shelf - 1 Fixed Glass Freezer Shelf - 2 Fixed Freezer Door Bins - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Benchmark Roto-Mini Plus Variable Speed Rotator w/ Tube Holders Benchmark’s new Roto-Mini series of  (more)rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, etc. the mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. The Roto-Mini rotator is also available in a “Plus” configuration, providing the following additional features:Variable speed: 5 to 70rpm “Mix” function: Rotating in combination w/ oscillations (increased mixing) “Pause” function: Rotating with intermittent “stops” during rotation “Rock” function: Back and forth, gentle rocking motion (see-saw) Included tube holders hold capacities of 11 x 1.5/2ml, 5 x 5-7ml, 5 x 10/15ml, and 6 x 50ml with 24 x 0.5ml. The Plus models also offer an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2ml tube/strip/plate holder for mixing PCR vessels in the “Mix” (oscillating) mode. Click Here to View Product Video INCLUDED: The Benchmark Roto-Mini Plus Variable Speed Rotator w/ Tube Hold includes: - Tube Holder, 11 x 1.5/2.0ml - Tube holder, 5 x 5-7ml - Tube holder, 5 x 10-15ml - Tube holder, 6 x 50ml - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment EPB 2103I Equinox Precision Balance, 2100g, 0.001g Capacity 2100g Readability 0.001g (more) Repeatability 0.001g Features - Large, responsive 5’’ 800x480 pixel touch-screen display - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - RS-232 interface provides speedy connection to computers and printers - USB host for memory card - Built-in memory for storing products and settings - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Security password control prevents unauthorized access - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Preset tare function speeds the process of repetitive weighing - Parts counting with freely selectable sample sizes - Multilingual display allows use in many different countries - Memory accumulation totals results - Check weighing with audible alarm The Adam Equipment Equinox Precision Balances deliver remarkable precision to labs that perform highly detailed testing. The Equinox is ideal for research and quality assurance facilities; science education; precision counting; and production and manufacturing applications needing exceptionally precise results. Twelve precision models offer capacities from 360g to 8200g and readabilities of 0.001g and 0.01g. A color touch screen display provides intuitive operation, with icon-driven menus and readily accessible applications and functions. The five-inch screen is generously sized, offering 800 X 480-pixel resolution for excellent visibility. INCLUDED: The Adam Equipment EPB 2103I Equinox Precision Balance, 2100g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty