Termoagitadores microplate MB Series

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Binder Model: UF V500 Ultra Low Freezer (-40..-90°C) P/N: 9020-0347 Description: The  (more)BINDER ultra low temperature freezer ensures the safe storage of samples at -90 °C. It combines outstanding environmental friendliness with low energy consumption, convenient operation and an individual safety concept. Benefits - Lowest energy consumption in its class- Environmentally friendly refrigerant- Multi-level safety concept Important characteristics - Range of temperature controller: -90 °C to -40 °C- Lowest energy consumption in its class- Powerful cascade compressor cooling unit- Environmentally friendly refrigerants R-290 and R-170- Efficient thermal insulation with vacuum insulation panels- Innovative door gasket concept reduces buildup of ice- Ergonomic door handle- Rust-proof interior made completely of stainless steel- Detachable inner doors made of stainless steel- 3 stainless-steel shelves providing flexible placement- Water cooling (depending on version)- Zero-voltage alarm contact for in-house alarm system- Ethernet interface- Elapsed time indicato- 2 access ports, Ø 28 mm, rear Specifications:Performance Data Temperature Cooling down time from 22 °C to -80 °C: 360 minTemperature fluctuation at -80 °C: 1.5°CTemperature range: -90…-40Temperature variation at -80 °C: 2.5 °CWarm-up time during power failure from -80 °C / -122 °F to -60 °C / -76 °F: 230 minElectrical data Nominal power: 1.6 kWPhase (Nominal voltage): 1~Power frequency: 50 Hz Rated Voltage: 230 VUnit fuse: 10 AUnit doors: 1 Housing dimensions not incl. fittings and connections Exterior dimensions: (WxHxD) 938 x 1966 x 826 mm Interior dimensions: (WxHxD) 605 x 1300 x 606 mm  Interior volume: 477LNet weight of the unit (empty): 247kgPermitted load: 200kgPermitted load of individual compartment: 50kgWall clearance back: 100 mmWall clearance sidewise: 250 mmEnvironment-specific data Energy consumption at set-point -80 °C and ambient temperature = 21 °C: 7.9kWh/dSound-pressure level: 47dB(A) Number of shelves (std./max.): 3 / 13Load-variants Cryoboxes, 50 mm: 352Freezer racks per compartment: 4 Itemds delivered: - Binder UF V500 Ultra Low Freezer  - Instruction Manual The Binder UF V500 Freezer is new and has never been used in lab environment.Ready for it's first duty.

Temperature range: Ambient to 320°C Speed range: 100 – 2000 rpm Max. stirring capacity H₂O: 10 L Pla (more)te dimensions: Ø 125 mm Plate material: Stainless steel Dimensions (WxDxH): 168 x 220 x 105 mm Weight: 2,4 kg

Coherent Enterprise Laser Head & Coherent Laserpure 5 Chiller This system was removed from a un (more)iversity lab where it was surplus to requirements. The units both power up but have not been tested further. They are in good cosmetic condition with marks from use. Included are; Coherent Enterprise Laser Head Power SupplyModel: ENTCII-653Serial#: 020775654-ENICManu: July, 2002 Coherent Laserpure 5 Heat Exchanger water-to-water Laser Cooling SystemModel: LP-51Serial#: 17772Manu: 13 May, 2002

Arctiko SUF 100 -86°C Ultra Low Chest Freezer Temperature Setting -40°C / -86°C Volume 2.5 cu. ft. ( (more)71L) Cooling System Single System / Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - Capable of reaching -80°C in only 85 minutes - The user friendly XR30CX controller is standard and includes different alarms such as visual, acoustic, power failure, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - Features a premade access port, making it easier to monitor or inspect the unit with external probes - 100% HCFC & CFC free The Arctiko SUF 100 -86°C Ultra Low Chest Freezer is a compact ultra low temperature chest freezer designed to work in high traffic labs. The single compressor technology ensures a quick pulldown, fast recovery time, and high temperature uniformity throughout the compartment, even with multiple door openings. The SUF 100 is capable of reaching -80°C in only 85 minutes and the single compressor technology is specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. The SUF 100 has optimized internal storage for the best overlook. With the included stackable basket and the optional stainless steel front rack storage system, samples will be easily accessible at any time. This freezer also features a premade access port, making it easier to monitor or inspect the unit with external probes. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. INCLUDED: The Arctiko SUF 100 -86°C Ultra Low Chest Freezer includes: - Key for Door Lock - Stackable Basket - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Corepoint Scientific EF171WWW-0MHC -15C to -25C Hazardous Location Freezer Temperature Setpoint Rang (more)e -15°C to -25°C Capacity 17 Cu. Ft. Defrost Method Manual Features - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C & D, ensuring safe storage in environments where volatile or explosive conditions may exist. - Utilizes ATEX and non-sparking components for enhanced safety, along with R291 refrigerant for efficient cooling. - Features a manual defrost system that helps maintain optimal cooling efficiency, requiring periodic attention to prevent ice build-up. - Provides 17 cubic feet of space, ideal for safely storing flammable or volatile materials with ease. - Equipped with a microprocessor temperature controller and a digital temperature display. - Includes a solid, right-hinged door with a magnetic gasket for a positive seal and a recessed handle. The Corepoint Scientific EF171WWW-0MHC Hazardous Location Freezer is designed specifically for use in environments where volatile or explosive conditions could potentially exist, ensuring safe operation and storage within regulated spaces. This 17 cu. ft. freezer features a solid, right-hinged door with a recessed handle and a magnetic gasket for a secure seal, providing optimal insulation and temperature control within a range of -15°C to -25°C. Constructed with high-density urethane foam and a robust powder coat steel exterior, the unit guarantees excellent thermal retention and durability. The freezer incorporates six fixed shelves, offering ample storage space for a variety of materials. It operates on a manual defrost system and includes a microprocessor temperature controller with a digital display, allowing precise temperature adjustments and monitoring in both Celsius and Fahrenheit.Power cord is not included - final power connections at site must be hardwired to meet local codes INCLUDED: The Corepoint Scientific EF171WWW-0MHC -15C to -25C Hazardous Location Freezer includes: - 6 Fixed Shelves - Key for Door Lock - Operator's Manual - 2 Year Manufacturer's Warranty

The first hot plate stirrer with embedded Wi-Fi technology Wherever you are, VELP Ermes allows the r (more)eduction of routine operations thanks to the real-time control of your AREX-6 Connect PRO. Access your analyzes from PC, Pad or smartphone, to maximize the productivity and reproducibility of your reactions. Immediate notifications and alerts will allow you to always be informed and thanks to the remote interruption you will have total control of your processes. SAFETY FIRST AREX-6 Digital PRO is equipped with 2 independent temperature reading circuits that protect the instrument in the event of a malfunction of one of the two. If the probe is not inserted into the sample being analyzed, the instrument stops heating, showing a safety message on the display. AREX-6 Digital PRO is equipped with the most advanced technology and allows you to set the maximum temperature limit required for analyzes with specific temperatures. The Lock function prevents inadvertent changes to settings by locking the instrument. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. CUTTING-EDGE THERMOREGULATION AREX-6 Digital PRO offers the best thermoregulation available. The PID thermoregulation system guarantees stable, fast temperature control with minimal overshoot. VTF and Pt100 probe allow accurate and precise temperature control. It is possible to choose between 2 different thermoregulation modes: - FAST: The set temperature is reached quickly. - FINE: The set temperature is reached slowly, minimizing overshoot. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX-6 Digital PRO is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX-6 Digital PRO is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Technical characteristics - Speed ​​regulation precision: 5 rpm. - Temperature regulation resolution: 1°C. - Connection for digital thermoregulators: VTF / VTF EVO. - Probe connection: Pt100. - Sample thermoregulation: ±0.5°C (VTF / VTF EVO) ±1°C (PT100). - Automatic reverse rotation: yes. - Probe detector: yes. - Lock function: yes. - Hot surface warning: on display. - Heating activation button: yes. NEW INTERFACE - EASY USE Bright LED display and intuitive icons. The icons will show you: probe or thermoregulator connection, heating activation, reaching the set temperature, timer activation and rotation reversal. The speed and temperature are set by the sensitive knobs, and are activated only after they are pressed. AREX-6 Digital PRO is equipped with an advanced menu that allows you to configure the instrument with the features that best suit the needs of the individual laboratory. INTEGRATED TIMER AND ROTATION REVERSE The central button allows you to set the timer from 1min to 99h59min. You can set the timer in 2 different modes: - Snap: The timer starts counting down as soon as a function is activated (stirring or heating). - SetP: The timer starts counting down as soon as the set temperature is reached. Furthermore, it is possible to set the rotation reversal at time intervals. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs.

Laboratory heating magnetic stirrer LBX 3L / 280°C - NEW New Equipment Speed - Rpm: 200-1500 Top pla (more)te diameter 135mm Hot plate with ceramic cover LED display that shows speed and temperature 515W Max temperature: 580°C Stirring volume: 3 liters ABS chassis with flame retardant material, resistant to weak acids and alkalis External dimensions (L x W x H): 260 x 150 x 80 mm 200-240V 50-60Hz

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 1 kg), wooden box Number of  (more)pieces in the set: 13

Postal Scale for Packages Postal facilities, courier, shipping and forwarding companies, online stor (more)es, warehouses, as well as offices and agencies – this is where postal scale for packages is indispensable. The postal scale for packages is designed for weighing items of various sizes and masses up to 60 kilograms with a readability of 20 grams, with possibility of multiple tarring in whole measuring range. The device comprises PUE C315 indicator, which features a backlit LCD display, assembled on a pillar attached to the back side of the weighing platform. Additionally, the scale is equipped with a second display indicating the measuring result to a customer. In non-verified version the scale can have additional functions: peak hold and measuring in Newton. It Has Been with us for Years, and Will Stay for a Long Time to Come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal Power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the C315.P.60 scale allows many hours of operation without mains power (up to 8 hours). As standard, the scale is equipped with an RS232 cable to which you can connect most of the accessories from our range. Do you Need ALIBI? There you have it. The ALIBI memory is like a black box of a scale. It records all measurements taken on the device. Based on the stored weighings, you can generate weighing reports and reports on the inspection or formulation processes carried out. ALIBI memory cannot be modified or erased. A single measurement remains in it up to the set limit number of days of storage, counting from the date it was taken. Not just Weighing But also parts counting, percent weighing, totalizing, animal weighing, plus/ minus control, peak hold and GLP procedures. The power of C315.P.60’s working mods. Do you require fast and repeatable mass measurement? This scale is made for that! The Power of Steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the C315.P.60 scales’ construction allows you to weigh large items. The stable platform is resistant to vibration, which is important when weighing objects of considerable mass.

Ohaus 30400169 Modular Heat Block, 10 x 8 PCR Tube Strips The Ohaus 30400169 Modular Heat Block, 10  (more)x 8 PCR Tube Strips is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400169 Modular Heat Block, 10 x 8 PCR Tube Strips includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty