Labconco 7900002 RapidVapVacuum Evaporation System with Lid Heater, 115V, 60Hz

Corepoint Scientific EF301WWW-0M -15C to -25C Hazardous Location Freezer Temperature Setpoint Range  (more)-15°C to -25°C Capacity 30 Cu. Ft. Defrost Method Manual Features - Offers a combined storage capacity of 30 cubic feet, with 25 cubic feet as a refrigerator and 5 cubic feet as a freezer. - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C & D. - Utilizes R404a refrigerant with dual defrost modes—cycle defrost for the refrigerator and manual defrost for the freezer. - Built with high-density urethane foam insulation and a powder coat steel exterior, enhancing durability and thermal efficiency. - Features leveling legs that allow for stable placement and easy installation in various operational environments. The Corepoint Scientific ERF302WWW-0 Hazardous Location Refrigerator/Freezer offers a comprehensive solution for the safe storage of sensitive materials in environments with stringent safety requirements. This unit provides a total storage capacity of 30 cu. ft., with 25 cu. ft. allocated to refrigeration and 5 cu. ft. to freezing, making it highly suitable for diverse laboratory needs where both cooling and freezing are required under controlled conditions.Designed to meet NFPA and OSHA guidelines for Class 1, Division II, Groups C & D hazardous locations, the ERF302WWW-0 ensures all electrical components, including the compressor and thermostat, are isolated and sealed within vapor-proof enclosures. This precaution significantly reduces the risk of spark generation in volatile environments. The unit features a solid, right-hinged door with a magnetic gasket for a positive seal, heavy-duty handles, and three adjustable shelves in the refrigerator for flexible storage solutions. Power cord is not included - final power connections at site must be hardwired to meet local codes. INCLUDED: The Corepoint Scientific EF301WWW-0M -15C to -25C Hazardous Location Freezer includes: - 3 Adjustable Shelves (Refrigerator) - Leveling Legs - Key for Door Lock - Operator's Manual - 1 Year Manufacturer's Warranty

Dimensions (WxDxH): 140 x 140 x 665 mm Compartment dimensions (WxDxH): 135 x 135 x 55 (x11) mm

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: -50°C to -86°C Capacity: 651 L Internal dimensions (HxDxW): 1308 x 645 x 777 mm D (more)imensions (HxDxW): 1978 x 988 x 1102 mm Weight: 358 kg

Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V Speed Range 34~340rpm Max Torque  (more)1.96/N•m (20/kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 34-340 rpm for high viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples). INCLUDED: The Yamato LR-500A Overhead Stirrer with 75mm 4-Blade Propeller, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Laboratory tap with gas base Straight wall feeder with base For technical gases, inert gases (nitrog (more)en), air (no burning gases).

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Additional WD-4/5 LCD display has been designed to connect with automatic scales. The display is equ (more)ipped with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver