Julabo MB-5A Waterbath

Refrigeration bath KB 08-40 FRYKA Main features: - Refrigeration unit: silent, fully hermetic, seale (more)d, air cooled, low maintenance - Parts of the casing made of stainless steel - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

Grant Sub Aqua Pro Water Bath SAP18 This item was removed from a university where it was surplus to  (more)requirement. The unit powers up and has been tested with a digital thermometer (not included). It is in good cosmetic condition.

Buchi R-210 Rotavapor Rotary Evaporator & Heidolph Heizbad WB Water Bath This was removed from  (more)a university lab where it was surplus to requirements. The system powers up and the motor and the water bath are in full working order. It is in reasonable cosmetic condition with marks and stains. Included are; 1 x Buchi RotavaporType - R-210SN - 0700006764Adjustable height from 47 to 57cm 1 x Heidolph Water BathType - Heizbad WBSN - 029902413

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up but is not in good working order. The unit will not heat, and was not accurate when chilling. It is in good cosmetic condition with minor marks.

Thermostatic bath with  circulation GFL 1012. Volume 7 L. Ambient temperature range +5 ° C to + 99.9 (more) ° C. Digital display Temperature adjustment by microprocessor with increments of 0.1 ° C. Short preheating. Security systems overheating and alarms. Stainless steel. Cover and rack. User manual.

IKA HB Eco Heating Bath Heat Temp. Range Room Temp. to 99°C Filling Volume Max. 4 l Material in Cont (more)act W/ Medium SS 1.4404 Features - 4 l bath volume - Max. media temperature: 99 °C - Ergonomic handles for easy handling - Temperature display - Alternating display of set-point/ actual temperature - USB interface - Stainless Steel 1.4404 construction to ensure durability The IKA HB Eco Heating Bath is a compact and ergonomic heating bath with a 4-liter volume, designed for efficient heating up to a maximum media temperature of 99 °C. It features ergonomic handles for easy handling and an alternating display of set-point and actual temperatures for precise monitoring. The bath has a USB interface for connectivity and data transfer. With a heat output of 1400 W, the heating temperature range is from room temperature to 99 °C, controlled by a turning knob with a set temperature resolution of 1 ±K. Made from stainless steel 1.4404, the bath is durable and resistant to corrosion. It includes a fixed safety circuit at 109 °C and complies with DIN 12876 Class I standards. The device dimensions are 330 x 190 x 325 mm, and it weighs 3.9 kg. Suitable for ambient temperatures of 5 - 40 °C and relative humidity up to 80%, the IKA HB Eco Heating Bath is a reliable and user-friendly tool for various laboratory heating applications.

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Temperature range: 2°C to 15°C Dimensions (HxWxD): 2115 x 700 x 830 mm Internal dimensions (HxWxD):  (more)1570 x 530 x 650 mm

Beckman Coulter Z1 Particle Counter with Controller This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but has not been tested further. it is in good cosmetic condition with minor marks.

MARSHALL Select MS-P2.5UL Pipette, 0.1-2.5ul Volume Range 0.1 to 2.5ul Adjustable or Fixed Volume A (more)djustable Pipette Type Manual Air Displacement Features - Ergonomic design minimizes user fatigue and risk of repetitive strain injuries - Lightweight and low-force operation enhances comfort during extended use - Large display window for clear volume identification - Integral tip ejector facilitates access into narrow tubes, improving usability - Compatible with universal pipette tips, increasing versatility - Easy to calibrate and maintain, ensuring long-term reliability - The lower part of the pipette is autoclavable for easy sterilization - Manufactured from innovative materials for durability and performance - Quality tested according to ISO8655-2:2002 standards for assurance of accuracy - Ideal for use in various laboratory applications requiring precise volume measurements The MARSHALL Select MS-P2.5UL Pipette is a precision instrument designed for meticulous laboratory work, offering adjustable volume settings from 0.1 to 2.5ul with fine increments of 0.05ul. This manual air displacement pipette features an innovative thumb plunger mechanism for smooth volume adjustment, ensuring precise control during experiments. Engineered with ergonomics in mind, this pipette boasts a lightweight, low-force design that significantly reduces the risk of repetitive strain injuries, making it ideal for prolonged use in demanding laboratory environments. The large display window prominently shows the volume setting for easy identification immediately, enhancing usability and accuracy. Additional features include an integral tip ejector that facilitates access into narrow tubes, increasing its versatility across various applications. The pipette is compatible with universal pipette tips, broadening its applicability. For maintenance, the lower part of the pipette is autoclavable, allowing for straightforward sterilization without compromising the integrity of the device. Manufactured from innovative materials and quality tested according to ISO8655-2:2002 standards, the MARSHALL Select MS-P2.5UL Pipette is not only durable but also ensures consistent performance and reliability, making it an essential tool for any laboratory focused on precision and ergonomics. INCLUDED: The MARSHALL Select MS-P2.5UL Pipette, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Versatility of Applications Varied Standards: The set consists of 12 flat polygonal sheets and 15 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.