IKA C-MAG HP 10 Hot Plate

Corepoint Scientific NSBF231WSW-0 -15C to -35C Single Solid Door Plasma Freezer Temperature Setpoint (more) Range -15°C to -35°C Capacity 23 Cu. Ft. Defrost Method Cycle Optimized, Automatic Features - Provides a spacious 23 cubic feet of storage, ideal for storing a large volume of blood-based products in compliance with FDA and AABB standards. - Features a top-mounted, variable speed compressor with a temperature setpoint range of -15°C to -35°C. - Equipped with seven standard 304 stainless steel drawers that can each hold up to 65 lbs. - Utilizes high-density urethane foam for both cabinet and door, enhancing thermal efficiency and maintaining uniform temperature. - Proportional Integral Derivative (PID) microprocessor with a clear LCD display and °C/°F switchable settings, providing precise control and easy monitoring. - Includes a full suite of alarms such as power failure, temperature sensor failure, and door ajar notifications, ensuring safety and compliance. The Corepoint Scientific NSBF231WSWCR-0 Single Solid Door Plasma Freezer is engineered to meet the rigorous standards required for the storage of blood-based products, conforming to FDA Class II medical device guidelines and AABB requirements. This plasma freezer offers a 23 cubic feet capacity and operates within a temperature setpoint range of -15°C to -35°C, ensuring optimal conditions for the preservation of critical materials. It features seven 304 stainless steel drawers that facilitate organized storage and easy access. The unit is built with high-density urethane foam insulation for superior temperature stability (+/- 0.1°C) and uniformity (+/- 0.7°C), and the exterior is finished in white powder-coated steel for durability. Mobility is enhanced with four swivel casters, front casters locking for secure placement. The plasma freezer includes a keyed door lock for restricted access, ensuring content security. Notable features include a Proportional Integral Derivative (PID) controller for precise temperature management. The freezer uses eco-friendly R600a refrigerant, aligning with EPA SNAP compliance for environmental responsibility. The dimensions of this freezer are 27.8 inches wide, 36.3 inches deep, and 81.5 inches high, and it weighs 360 pounds, making it a robust and reliable solution for any medical or laboratory setting requiring stringent blood storage regulations. INCLUDED: The Corepoint Scientific NSBF231WSW-0 -15C to -35C Single Solid Door Plasma Freezer includes: - 7 Drawers - 4 Swivel Casters - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Corepoint Scientific GPF231SSS-0A3 -27C to -35C Solid Door Stainless Steel Laboratory Freezer Temper (more)ature Setpoint Range -27°C to -35°C Capacity 23 Cu. Ft. Defrost Method Automatic Features - Offers 23 cubic feet of storage, allowing for ample space to meet general-purpose freezing needs with ease. - Features a microprocessor temperature controller with a digital display, enabling precise control and verification of temperatures. - Includes an auto-defrost feature that maintains a frost-free interior, enhancing convenience and reducing maintenance efforts, despite the moderate temperature rise during defrost cycles. - Incorporates audible and visual high and low temperature alarms, ensuring the safety and integrity of stored contents. - Uses R290 refrigerant, which is environmentally friendly and enhances the unit’s sustainability. - Includes two probes, one in air and one in a sample bottle, for dual monitoring of environmental and specific sample temperatures. Enhance your laboratory's storage capabilities with the Corepoint Scientific GPF231SSS-0A3 Solid Door Stainless Steel Laboratory Freezer. This robust 23 cu. ft. unit features a durable stainless steel exterior and an easy-to-clean white-powder coated aluminum interior with a 304 stainless steel floor. It reliably maintains temperatures from -27°C to -35°C (-16°F to -31°F) with a digital display microprocessor for precise control. Key features include audible and visual temperature alarms, an auto-defrost system that minimizes temperature fluctuations, and dual temperature probes for accurate monitoring. Equipped with four swivel casters for mobility and a hydrocarbon natural refrigerant (R290), it combines environmental responsibility with performance. This freezer is an ideal choice for laboratories requiring stringent temperature management and security in their cooling solutions. INCLUDED: The Corepoint Scientific GPF231SSS-0A3 -27C to -35C Solid Door Stainless Steel Laboratory Freezer includes: - 3 Adjustable Shelves - 4 Swivel Casters - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Refrigerant R290 Working Temperature Range -25/ -10 °C (-77 / -50 °F) Capacity 49.44 Cu. FT (1400L (more)) Features - Superior performance and temperature stability - High-quality Carel digital controller - Data logger with Bluetooth and NFC interface - High / Low temperature warning alarm - Open door alarm - Power failure alarm (visual and acoustic) - LED inside light (refrigerators models) - Forced air ventilation - Port hole - UL61010 certification - Energy Star rating - 115V/60Hz power - Sizes available from 14.12 cu.ft. up to 49.44 cu.ft. Arctiko LF 1350 -10C / -25C Upright Biomedical Freezer The Arctiko LF 1350 high-capacity upright freezer offers the superior features required for biomedical applications. This model includes a high-quality Carel controller with Bluetooth connection as well as high/low temperature alarms and a built-in data logger.INCLUDED: The Arctiko LF 1350 -10C / -25C Upright Biomedical Freezer includes: - Key for Door Lock - Shelves - Power Cord - Two Year Manufacturer's Warranty

Temperature range: -9°C to -30°C Maximum fluctuation: 4.2°C Maximum gradient: 6.8°C Defrost system:  (more)Manual defrost system Cooling system: Static Capacity: 284 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1587 x 420 x 400 mm Weight: 86 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 27L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 27L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Z446 Centrifuge w/ Swing Out Rotor The Z446 universal centrifuge series offers the highest ca (more)pacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Swing Out Rotor includes: - Z446-750 4 x 750ml Swing Out Rotor - Z446-750-B50 7 x 50ml Conical Buckets (Set of 2) - Z446-750-B15 17 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Eppendorf 26 x 1.5/2.0ml Adapters, Cat. # 5804794001 The Eppendorf 26 x 1.5/2.0ml Adapters, Cat. # 5 (more)804794001 are for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 26 x 1.5/2.0ml tubes each with the maximum tube dimensions (Diameter x Height) of 11mm x 43mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 26 x 1.5/2.0ml Adapters, Cat. # 5804794001 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 26 x 1.5/2.0ml Adapters, Cat. # 5804794001 SpecificationsBottom ShapeFlatRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor

Waters Lambda-Max Model 481 LC Spectrophotometer