DuPont Qualicon Bax System Dry Block Heater

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

This Stem Corporation Block Heater & Chiller  Model - RS2550 was removed from a university  (more)lab where it was surplus to requirements. The heater powers up and has been tested with a digital thermometer (not included).When set to 37˚C the display showed 37˚C and the thermometer measured 36.2˚C.When set to 55˚C (max) the display showed 57˚C and the thermometer measured 53˚C. We were unable to test the shiller as we don't have the connecting cable. The magnetic stirrer seems to be working well. 25 x 27mm diameter tube holes

Kryo 560-16 Planer Lab This system was removed from a university where it was surplus to requirement (more). It is in good cosmetic condition and powers on, we are unable to test it further at our facility. 1x Kryo 560-16 Planer:Model. K10/16 - Powers on - Interior is in excellent condition.

New Brunswick Scientific Innova U725G Ultra Low-Temperature Freezer Lab U725 -86 This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. Internal dimensions: L61 W87 H136cmIncludes 2 Shelves: 55 x 84cm The manual and keys are included.

Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 10L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing our Yamato Programmable Vacuum Drying Oven, a compact and versatile solution ideal for laboratory settings. This 10L, 115V oven offers advanced features designed to enhance safety and efficiency. With easy parameter input and a digital PID controller supporting various temperature modes, including fixed temperature, quick auto-stop, auto-start, and program operations, your experiments will run smoothly. Safety is paramount with self-diagnostic and overheating prevention functions, while the silicon rubber door seal ensures an airtight chamber. Individual overheating prevention devices for each circuit add an extra layer of protection, and the oven is customizable with N₂ gas inlet and communication ports. Plus, the calibration offset function ensures precision, and easy maintenance keeps your equipment in top condition. Safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, and temperature measurement error prevention.INCLUDED: The Yamato ADP-200C Benchtop Vacuum Oven 10L, 115V includes: - Shelf Plate (2 pcs.) - Power Cord - One Year Manufacturer's Warranty

SCILOGEX SCI-5102XUV Double-Beam Spectrophotometer Wavelength Range 190 to 1,100 nm Wavelength Accu (more)racy ±0.1nm @ 656.1nm; ±0.3nm @ all Optical System Double Beam, Grating 1200 lines/mm Features - 10.1 inches high resolution TFT colored capacitive touch screen and windows graphic interface - Powerful functions like Photometric measurement, Quantitative measurement, Kinetics, Spectrum scan, DNA Protein test, multi-wavelength test, etc - In-house massive memory is capable of saving up to 1024M for test data & working curves - Various optional accessories, like automatic cell holder, thermostatic automatic sampler, adjustable micro cell holder, reflection accessory and integrating sphere, etc. which extend the application range of device and combine the requirements of common samples and special ones - Supports USB storage. The USB port can be used for data transfer, which is easily exported to Excel for further processing, analysis and storage - Xenon lamp light source with extra-long service life saves you the trouble of changing lamps The SCILOGEX SCI-5102XUV Double-Beam Spectrophotometer is a highly reliable and versatile instrument designed to meet the demands of advanced spectroscopic analysis. With a double-beam optical system and a 1200 lines/mm grating, it provides precise and consistent measurements across a wavelength range of 190 to 1100 nm. Its 2nm spectral bandwidth and exceptional wavelength accuracy of ± 0.1nm @ 656.1nm ensure accurate results, making it ideal for various laboratory applications. The 10.1-inch TFT colored capacitive touch screen with an intuitive interface simplifies operation and enhances the user experience, while work modes including photometric, quantitative, kinetics, spectrum scan, and multi-wavelength tests ensure versatility. Built for efficiency and convenience, the SCI-5102XUV is equipped with a xenon lamp light source for long-lasting performance, reducing the need for frequent replacements. Its photometric accuracy and repeatability, coupled with a wide photometric range of 0-200%T and -0.3 to 3A, make it suitable for demanding applications. The USB drive, USB host, and RS232 output options allow for easy data transfer and connectivity. Compact and robust, the spectrophotometer features a 10mm manual 4-cell holder and weighs 59.5 lb. (27 kg), with shipping dimensions of 31.9 x 25.98 x 15.4 in. (81 x 66 x 39 cm). Powered by AC 110V/60Hz or 220V/50Hz, the SCI-5102XUV is a dependable tool for laboratories seeking precision and functionality in their spectroscopic workflows.INCLUDED: The SCILOGEX SCI-5102XUV Double-Beam Spectrophotometer includes: - 4 x 10mm Glass Cuvettes - 2 x 10mm Quartz Cuvettes - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This BioSpectrum UVP MultiSpectral Darkroom Imaging System was removed from a university lab where i (more)t was surplus to requirements. The BioSpectrum UVP MultiSpectral Darkroom Imaging System is in good cosmetic condition and powers on, we are unable to test it further at our facility. All units are in good cosmetic condition. Includes the following: UVP Benchtop TransilluminatorComputar TV zoom Lens CameraSony Digital Graphic Printer UP-D897

Panasonic MDF-U500VX Ultra Low Temperature Freezer ULT It is in good cosmetic condition and powers o (more)n, we are unable to test it further at our facility. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally.

Malvern Instruments NanoSight NS500 Size and Concentration Analyser This was removed from a universi (more)ty lab where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab informed us that currently it is operating well, however they were getting an 'autofocus error' when they request the software to auto-focus. Because manual focus is also an option, it wasn't a huge issue. Includes; 1x NanoSight Software CD NTA 2.1 1x NanoSight Software CD NTA 2.1 Operating Manual 1x NanoSight NS500 Operating Manual 1x NanoSight NS500 Gaskets (pack of 5)

The MW-04-1 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, Ethernet. The MW-04-1 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-1 mass converter allows to operate up to 4 weighing platforms. Construction: The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, Ethernet may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-1 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.

Heidolph Hei-TORQUE Expert 200 Overhead StirrerWith Hei-TORQUE Value 200 you can optimally stir visc (more)osities up to 100,000 mPas or volumes up to 50 liters (H2O). Thanks to a wide speed range from 10 to 2,000 rpm and a maximum torque of 200 Ncm, it works particularly powerful.The laboratory stirrer Hei-TORQUE Expert 200 performs every stirring task with minimal noise thanks to the latest engine technology. This laboratory stirrer is also very user-friendly in terms of operation and safety. The 2.4 inch display makes it very easy to set the application parameters and control the process (e.g. using the torque trend display). The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on.Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE Expert 200 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools for the best stirring results. *Stand, clamp, and impeller are sold separately* Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Expert 200 Overhead Stirrer includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty