Zeiss Slider 10 Grad Degree Eyepice / 423904-8231-000

Accuris F1001 Smart-Q 100 Quantitative Fluorometer Measurement Speed ≤ 5 seconds Excitation Waveleng (more)ths Blue: 460 ± 20nm and Red: 625 ± 20nm Emission Wavelengths Green: 525 – 570nm and Red: 670 – 725nm Features - Sensitive quantitation down to 0.1pg/ul ds DNA - Large color touch screen for programming and operation - Two models for single or 8-sample processing - Built-in reagent calculators for sample preparation - Compact and portable (11 x 6 inch footprint) The Accuris Smart-Q 100 and Smart-Q 800 Quantitative Fluorometers are designed for the precise quantification of DNA, RNA, and protein samples. By utilizing well-established methodologies for fluorescence detection, the Smart-Q Fluorometers provide higher specificity and enhanced accuracy compared to the traditional method of UV-absorbance detection. Accurate results are particularly crucial in workflows involving: Next Generation Sequencing, PCR, Transfection, Western blotting, and Immunoassays. The Smart-Q Fluorometers are engineered to achieve optimal performance with Accuris’ Fluorescent DNA Quantification Kits and assay tubes; however, they also maintain compatibility with a range of kits offered by various other suppliers. Each instrument is equipped with a 7-inch color touchscreen, featuring an intuitive, icon-driven user interface. Preprogrammed protocols allow for quick & effortless assay set-up. Results are quickly calculated and displayed in less than 6 seconds and saved to the instrument’s internal memory. All data can also be exported easily to a PC using a USB flash drive. The Smart-Q Fluorometers, along with their accompanying assay kits, are engineered for the precise measurement of fluorescent dye signals that are bound to targeted biological molecules. These specially formulated dyes exhibit selective affinity towards DNA, RNA, or proteins, and generate fluorescent signals exclusively upon binding to their respective targets. Both Smart-Q models include Blue and Red channels that allow for various fluorescent dyes to be used in nucleic acid and protein measurements. The Smart-Q Fluorometers incorporate advanced curve-fitting algorithms to establish calibration curves from standard samples of known concentrations. The concentration of an unknown sample, whether it be DNA, RNA, or protein, is determined by correlating its Relative Fluorescence Units (RFUs) with those of the standards employed during calibration. The measurement sensitivity for each type of assay is distinct and defined by its detection limits. INCLUDED: The Accuris F1001 Smart-Q 100 Quantitative Fluorometer includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards T-Station 300D Wet Turbo Station ISO100, 100-120V Ultimate Pressure 6×10⁻⁸ mbar Inlet Connec (more)tion DN 100 ISO-K Leak Tightness <1x106 mbar l/s Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable. - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking. - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application. Edwards T-Station 300 turbomolecular pumping station buildson the existing popular T-Station 85 platform by replacing the nEXT85Hturbomolecular pump with the nEXT300 turbomolecular pump we have extended ourportfolio and are providing a solution for customers and applications that requirea higher pumping speed up to 300 ls-1. Offering higher pumping speeds of up to 300 ls⁻¹, this solution caters to applications that demand rapid and efficient performance. The pump's cost-efficient package features a compact, modular design, ensuring both affordability and adaptability for diverse setups. Its plug-and-pump design provides a user-friendly experience, requiring no systemization or additional air cooling, and comes fully assembled for quick operation. Built with a robust, low-profile all-metal frame, it withstands rough handling and features a base plate with rubber feet for added stability. Additionally, the pump is designed for easy user serviceability, minimizing downtime and lowering the cost of ownership by allowing straightforward maintenance. Click Here to View Product Video INCLUDED: The Edwards T-Station 300D Wet Turbo Station ISO100, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT300D Turbomolecular Pump with ISO100 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Old Interscience FID Trace GC without software

Liquid level detector

Angelantoni Platinum 500 SV Ultra Low Temperature Freezer Lab This item was removed from a universit (more)y where it was surplus to requirement. The unit powers up and is in good working order to -45˚C It is in reasonably good cosmetic condition externally and in good cosmetic condition internally. This item features a key lock with the required key included.

This was removed from a university lab where it was surplus to requirements. The system is in reason (more)able cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented. The item is untested as it wasn't supplied with a PSU. Also included are the following:1x Delta-T Devices atmospheric temperature & humidity probeS/N: RHAI-077 1x Delta-T PC software type LS2Version 1.04 1x Desiccant Pack1x DE-9 cable1x Tutorial Kit1x Spares & Accessory Pack3x Component part (EMC directive) 5m 5x Temperature Probes User Manual1x Quantum Sensor User Manual1x Delta-T Devices Data Loggers, Sensors & Systems1x Delta-T Devices Plant Science & Solar Radiation Studies1x Delta-T Devices Image Analysis Systems1x Delta-T Logger User Manual Version 2.01

VACUUBRAND MD 4C NT +AK SYNCHRO+EK Chemistry Vacuum System Ultimate Vacuum 1.5 mbar Max. pumping s (more)peed at 60 Hz 2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Simultaneous operation of two independent vacuum applications, with reliable check valves to prevent interference between systems - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system provides the simultaneous operation of two processes with only one pump. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. Each vacuum connection is provided with a manual valve to regulate the effective flow at each port. The MD 4C NT pump offers more than sufficient pumping speed also for the parallel operation of two challenging applications. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 4C NT +AK SYNCHRO+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

M1 Mass Standard - knob weights with adjustment chamber. Nominal value - 10 kg.

PS X7.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOC (more)K technology. The innovative construction of PS X7.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. Weighing module RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5” colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X7.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.

Single-channel electronic pipette F81044 GILSON P300M 20 to 300 µl Model P300 M: 20 to 300 µl Manufa (more)cturer reference: F81044