Vinitex 3 Drawer cabinet low White

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39135 Fisher Scientific Power 608 ITEM-39137 Apelex ps 608 ITEM-39138 Apelex PS 608 ITEM-39139 Bio-Rad 2110 Fraction Collector ITEM-37095 Phenomenex DEGASSEX DG-4000 ITEM-37097 Hewlett Packard series 1100 waste bottle tray ITEM-37098 Agilent Technologies Waste Bottle Tray ITEM-39142 Apelex PS 304II ITEM-39143 Apelex PS 304II ITEM-25295 Mettler Toledo AG104 Digital Analytical Balance Laboratory Scales Lab ITEM-25809 Bibby Scientific Stuart Orbital Rotator SB3 Lab ITEM-11323 Thermo Scientific Barnstead RO Model 7155 Water Purification System Purifier Lab ITEM-39144 Techne Dri-Block DB-2A ITEM-41034 man150m fan x 2 ITEM-39145 Techne Dri-Block DB-2A ITEM-37102 Unicam Flow-Through Cell-(Boxed) ITEM-24751 Boekel UV Crosslinker Lab - No Bulbs. ITEM-40915 APC Back-UPS CS 500 ITEM-40916 Plastic Support Plate ITEM-40917 Bio-Rad Model 200/2.0 Power Supply ITEM-40918 Bio-Rad Power Pac 1000 ITEM-40919 Axon Instruments CyberAmp 380 ITEM-39149 Stovall The Belly DancerITEM-39150 Zeiss Microscope ITEM-39153 Swift M4000-D Microscope ITEM-39154 Bio-Rad Model 2110 Fraction CollectorITEM-39156 Techne Mini Centrifuge ITEM-39157 Life technologies tfx-20M ITEM-39158 Hancocks light box ITEM-39159 Jencons scientific light box ITEM-39160 IKA-Vibrax-VXA ShakerITEM-39059 Bio Rad 500ITEM-39060 AND Balance ITEM-39058 Consort E432ITEM-37105 Samsung Shoot and Share Memory Camcorder- boxedITEM-37106 JVC GR-D820 Camcorder ITEM-37107 JVC Everio Hard Disk Camcorder G SeriesITEM-37108 Perkin Elmer LC 240 Fluorescence Detector ITEM-39914 Horiba LY-201ITEM-41033 Olympus SZ40 Stereo Zoom Microscope

Branson Disruptor horn 3/4 in dia. Threaded with solid tip Disruptor horn, 3/4″ diameter, threaded w (more)ith solid tip, used with Branson SFX250, SFX550, S250A, and S450A sonifiers; used for processing volumes of 25 – 500 mlINCLUDED: The Branson Disruptor horn 3/4 in dia. Threaded with solid tip includes: - Manufacturer's Documentation Request a Formal Quote

Radius gauge designed to check deviations in the inner circumference of tubes. Readability: 0.01 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

VWR LAB DISC magnetic stirrer Ultra-flat and compact magnetic stirrer with no moving parts. Reverses (more) the direction of rotation every 30 s to ensure optimal mixing. Direction of rotation reversible adjustable Wear-free training Plate and housing made of chemical resistant materials Non-slip and stable Model: Lab Disc Speed range: 15 - 1500 min⁻¹ Max mixing capacity H₂O: 800 ml Plate material: polyester Plate, LxW: Ø 100 mm Weight: 0.3 kg Input/output power: 5/3 W W×D×H: 117×180×12 mm

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 200 g), wooden box Number of p (more)ieces in the set: 23 Weights 1 g i 2 g – solid masses without adjusting chamber

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

KNF N816.1.2 KT.18 vacuum pump. Diaphragm pump and compressor for slightly corrosive vapors and gase (more)s. Without oil. Flow rate L/min 30. Max. allowable operating pressure 0.5 [bar g]. Maximum vacuum 160 mbar abs. Ambient and medium temperature +5 °C to +40 °C. It features PPS heads, PTFE-coated diaphragms and FFPM valves. Dimensions 361*141*102 mm. Weight 3.95 kg. User manual. The KNF N816.1.2 KT.18 vacuum pump is a highly efficient and reliable equipment used to generate vacuum in different industrial and laboratory applications. This vacuum pump features a compact and robust design, making it ideal for use in tight spaces. It is equipped with a powerful and silent motor that guarantees optimal performance and uninterrupted operation. In addition, it has a temperature control system that prevents overheating and prolongs the useful life of the equipment. This vacuum pump offers high air flow and excellent suction capacity, making it an ideal choice for applications requiring fast and efficient vacuum. In addition, it has an integrated air filtration system that guarantees the purity of the vacuum generated. In summary, the KNF N816.1.2 KT.18 vacuum pump is a reliable and efficient option for generating vacuum in industrial and laboratory applications. Its compact design, optimal performance and ease of use make it an indispensable tool for those who require a quality vacuum in their processes.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW